Repair ALL SX1 here

[free_gsmx]

very thanks , dagos good job


for SX1 full flash go to:
http://gsm-multifund.de/board/downlo...do=file&id=283
(E-Gold part; need to register)
http://eh.student.utwente.nl/~landy/...r=Repair_FuBu/
(E-Gold part)
user: mobile
pass: elibom
http://www.siemens-club.ru/soft-ff.php
http://gsmsimlocking.com/Gsm/index.p...l_Support/SX1/
(all files)
user : gsmsimlocking
pass : freefornow

[Formingus]

and at last i need to take 100 euro customer for that work

[op_pedaw]

sorry, i have died sx1. i fullflash with joker n freia still died. but if i start on can ear sound low batre but no any display in lcd. what must i do it?

[riad]

i have same problém pleas help me

[maaciekk]

sorry for renewing the topic... and what if I use 64MB flash from SK65? do 32MB and 64MB flashes has the same pinout? will it be a possibility to increase eg SX1's RAM from 16 to 24MB, Z: drive to 32 and ROLF & C: drive both to 4MB?? I think it will be a bit different way to address the memory, but is it possible? will Symbian 7 fit the phone?

[peimanjoon]

my sx1 is lock and i need its code.i so try to found an answer but nobody didnt help me.if somebody can help me please dont withhold me.
thank you all friends.
my iemi :
352079003149422

sx1

[nrutt007]

very nice post...i will try tomorrow i have 2 of in my hand....

[lala166]

Originally Posted by BB-gsm

After you have Resoldered it well, replace these 2 resistors and short the rest two
You can see well in this picture:

Hi! Can someone write this in other words ?? I don't understand what I must to do if I have got big flash
Thx in advance ..

[peimanjoon]

Dear Sticky ,
Really You Cant Help Me ?
I Have So Problem Without Use My Mobile.
Please Help Me If You Can.
Because I Am Not Conscious In Mobile Program.
My Moile Is Siemense Sx1.and I Need Its Unlock Code.
Iemi Is 352079003149422.
Thankyou So Much.

[khasscorpio]

hello, my SX1 is dead. it was working well and some days back it suddenly hanged itself and i removed battery again put and press button on it shows some blue lines or sometime dont show any anything on screen and turns off not booting at all and not starting in winswup mode.battery i used is charged full cuz i have desktop charger. i gave it to some hardware and he said it has MMI problem and its not available.please tell me what i can do.i desperately need to use my SX1 again.

[fastlink Jogja]

Originally Posted by khasscorpio

hello, my SX1 is dead. it was working well and some days back it suddenly hanged itself and i removed battery again put and press button on it shows some blue lines or sometime dont show any anything on screen and turns off not booting at all and not starting in winswup mode.battery i used is charged full cuz i have desktop charger. i gave it to some hardware and he said it has MMI problem and its not available.please tell me what i can do.i desperately need to use my SX1 again.

this is old thread.. i think you must rehoot your small, big flash ic and cpu first. dont do if you dont know anything about repairing mobile. find somebody with experience.

goodluck

fastlink

[sanjeev9]

i think you should check if someone has a martech and try it on martech, should work.

[hassan_05]

Could any one please send me scheme for siemens handsfree cable for A51

[hassan_05]

Please could any one send me the sheme for siemens A51 hands free

[torpedo_seluler]

Ho Mr. BB-GSM I know this is very old post. But i am facing SX1 prob no, It just phone locked. But know the phone completely Dead after i flash with Joker, Now what should i do??

Thanks if willing to help.