2 pcs dead CT65 cannot enter serivice mode - GSM-Forum

lc5829 · 10-06-2005, 09:29

I have here the above mentioned phones, when I try to boot them in Papua's soft i get:

AutoIgnition...
Transmit Boot...
Boot not loaded !
Wrong BOOTKey or not closed TP !
Boot unlock .

Ofcourse TP is connected.

When try to boot in EEpromTools i get:

"subscript is out of range".

What the heck is this?
Any chance to get them into service mode, to be at least able to give them a fullflash?

Thanks!

e-studio.hu

Chris02 · 10-07-2005, 19:44

Just write a good EEPROM and make IMEI repair afterwards

lc5829 · 10-07-2005, 20:04

How to write eeprom of I can't enter service mode, don't know what version the phone is.
BTW, this afternoon I succeeded to bypass the first phase of boot. Papua's soft wrote something like "cannot enter boot, possible reasons 1. flash ic damaged, etc." so most likely it's hardware related.

Anyway, thanks for the idea.

WBR
e-studio.hu

Chris02 · 10-07-2005, 20:18

I think only your EEPROM is damaged!

You need the bootkey!

Read ESN and HASH with testpoint. If that is done flash phone with V_klay or x65 Flasher

lc5829 · 10-07-2005, 21:49

That's the point. Papuas cannot read HASH and ESN, so any further action including flashing, and uploading eeprom is impossible.

I think it's hardware related, but will keep trying with re-hotting some components.

10-06-2005, 09:29	#1 (permalink)
lc5829 Freak Poster Join Date: Dec 2002 Location: Zooropa Age: 42 Posts: 490 Member: 18832 Status: Offline Thanks Meter: 18	2 pcs dead CT65 cannot enter serivice mode I have here the above mentioned phones, when I try to boot them in Papua's soft i get: AutoIgnition... Transmit Boot... Boot not loaded ! Wrong BOOTKey or not closed TP ! Boot unlock . Ofcourse TP is connected. When try to boot in EEpromTools i get: "subscript is out of range". What the heck is this? Any chance to get them into service mode, to be at least able to give them a fullflash? Thanks! e-studio.hu

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
6120c cannot enter local mode or test mode	doublex_gsm	Nokia Hardware & Hardware Repair	0	10-02-2008 15:44
CT65 dead cannot enter serivice mode	khalik	S-Gold Based Phones	0	04-19-2006 01:54
Fisio 311 IMEI corrupted but cannot enter TAT mode	cysttklc	Philips	5	12-08-2004 07:14
Savvy 188/W1 cannot enter TAT mode?!?	Genata	Philips	4	12-08-2000 17:28

10-07-2005, 19:44	#2 (permalink)
Chris02 No Life Poster Join Date: Oct 2003 Location: Germany Age: 37 Posts: 5,196 Member: 41076 Status: Offline Thanks Meter: 53	Just write a good EEPROM and make IMEI repair afterwards

10-07-2005, 20:04	#3 (permalink)
lc5829 Freak Poster Join Date: Dec 2002 Location: Zooropa Age: 42 Posts: 490 Member: 18832 Status: Offline Thanks Meter: 18	How to write eeprom of I can't enter service mode, don't know what version the phone is. BTW, this afternoon I succeeded to bypass the first phase of boot. Papua's soft wrote something like "cannot enter boot, possible reasons 1. flash ic damaged, etc." so most likely it's hardware related. Anyway, thanks for the idea. WBR e-studio.hu

10-07-2005, 20:18	#4 (permalink)
Chris02 No Life Poster Join Date: Oct 2003 Location: Germany Age: 37 Posts: 5,196 Member: 41076 Status: Offline Thanks Meter: 53	I think only your EEPROM is damaged! You need the bootkey! Read ESN and HASH with testpoint. If that is done flash phone with V_klay or x65 Flasher

10-07-2005, 21:49	#5 (permalink)
lc5829 Freak Poster Join Date: Dec 2002 Location: Zooropa Age: 42 Posts: 490 Member: 18832 Status: Offline Thanks Meter: 18	That's the point. Papuas cannot read HASH and ESN, so any further action including flashing, and uploading eeprom is impossible. I think it's hardware related, but will keep trying with re-hotting some components.