All about EL71 here and only here ! - GSM-Forum

pepik · 11-07-2006, 17:04

I have EL71 for unlock. Martech box can ´t help me.
I try Papua v0.9.1

/i connect TP to GND - press Do the Job - short time press red button on phone - disconnect TP /when "Pause 2 sec"/
Cable is ok - COM1 - 115200 baudrate
Battery is full

Here is a log :

Press Red key !
Autostart...
ÜTransfer Boot...
BOOT geladen...
Pause 2 Sec...
Getting Information.....
Unbekannter Flash (ID:0000) oder:
1) Fehler beim Testpoint setzen.
2) Not all contacts (Broken Balls).
3) Flashdefectiv
4) Oter part defective .
5) Defective cable .
Boot ist open..

_______________________________________
and here is log from Setting - Information

Model: SIEMENS ELF1 13 lg41
Telefon ist im "Normal Mode"
IMEI: 35xxxxxxxxxxxxxx
SecurityStatus: CustomerMode
HWID: 407
Achtung: HWID passt nicht zum Telefon!
Akkuspannung: 3904 mV.
EELITE Info: free buffer 199424 bytes, free at all 206304 bytes, free for deleted 206304 bytes.
EEFULL Info: free buffer 137760 bytes, free at all 466432 bytes, free for deleted 204352 bytes.
Map Info: Date: 14/06/06, Variant: A 976, Std-Map/SW: 1/13, D-Map/Prov.: 101/61
Für erweiterte Informationen erst den SKEY senden!
Laufzeit: 2106 Sekunden.
Gesprächszeit: 15 Sekunden.
FlashID(1) - Hersteller: 0020, Typ: 8819.
Anzahl Displays: 1
DisplayID 1 Typ: Display EL71 Controller: .

Any idea for unlock it ? or i doing something wrong ?

debeliamark · 11-08-2006, 07:55

Probably new intel 897E flash IC inside ...

pepik · 11-08-2006, 09:19

I try Papua v0.9.3b

Here is a log :

Rote Taste drücken!
Autostart...
Übertrage Boot...
BOOT geladen...
Testpoint bitte lösen!
Weiter in 2 Sec...
Erhalte Informationen...
FlashID: 0000,0000 (64Mb)
ELF1 SIEMENS 35xxxxxxxxxxxxxxx
HASH: 4414D2E120C3905EC3FEEA56F2EE815F
OTP ESN: Falsch!
OTP IMEI: 000000000000000
Boot ist offen. Alles OK.

Model: SIEMENS ELF1 13 lg41
Telefon ist im "Normal Mode"
IMEI: 358941000639040
SecurityStatus: CustomerMode
HWID: 407
Achtung: HWID passt nicht zum Telefon!
Akkuspannung: 3883 mV.
EELITE Info: free buffer 199424 bytes, free at all 206304 bytes, free for deleted 206304 bytes.
EEFULL Info: free buffer 112960 bytes, free at all 466432 bytes, free for deleted 204352 bytes.
Map Info: Date: 14/06/06, Variant: A 976, Std-Map/SW: 1/13, D-Map/Prov.: 101/61
Für erweiterte Informationen erst den SKEY senden!
Laufzeit: 2813 Sekunden.
Gesprächszeit: 15 Sekunden.
FlashID(1) - Hersteller: 0020 (ST), Typ: 8819.
Anzahl Displays: 1
DisplayID 1 Typ: EL71 Display Controller: Unbekannt .

BouRRi_GSM · 12-03-2006, 19:01

hi

can u read the full flash from phone with papua & upload it?

SIEMENS ELF1 13 lg41

thx

BB-gsm · 12-03-2006, 20:04

Hi,

I will close all threads about EL71, and make this one STICKY,

Please post about your problems and ideas only here, in this thread ..

Regards

BouRRi_GSM · 12-03-2006, 20:22

thx BB-gsm to make one of EL71 thread sticky

plz for all we have info or idea post here

also post Full Flash and bcore from working phone

thx

nova75c · 12-04-2006, 06:05

I have full flash from working phone.But how can i upload ? i can not unlock my EL71.Phone is ok but after 1 minute , it said :"phone locked , please turn off" !!!! Papuas said that : "must enter SKEY" .But Skey entered !

foosoomin · 12-04-2006, 13:09

What cable do you use to unlock EL71 ?

DCA-140 ?

Afzaal · 12-04-2006, 13:26

Quote:

Originally Posted by foosoomin

What cable do you use to unlock EL71 ?

DCA-140 ?

Log Shows Com 1 OK
So i don't think its USB Cable.
BR.

foosoomin · 12-04-2006, 13:34

Quote:

Originally Posted by Afzaal

Log Shows Com 1 OK
So i don't think its USB Cable.
BR.

So, it should be DSC-100, that Synstation, i assume

BouRRi_GSM · 12-04-2006, 14:21

same cable and pinout like A31

foosoomin · 12-04-2006, 15:02

Quote:

Originally Posted by BouRRi_GSM

same cable and pinout like A31

So the answer is ????

DCA-140 or DSC-100 ?

BouRRi_GSM · 12-04-2006, 15:26

i don't know about name

i make my cable by myself

it's simple RJ45 cable with 3 wires (RX, TX & GND) & work with universal box

use search that's so easy, this thread is not about cable pinout, it's about software problm of EL71

thx

BouRRi_GSM · 12-05-2006, 23:23

EL71 repair Bcore is okey like method posted by gehstock here

Press Red key !
Autostart...
ÜTransfer Boot...
BOOT geladen...
Pause 2 Sec...
Getting Information.....
FlashID: 0089,887E (64Mb)
EL71 SIEMENS 358941002472234
HASH: 34A54B7C07AF4016CF440703F00CBEBC
OTP ESN: BDEB2E6C
OTP IMEI: 358941002472234
Geschwindigkeit 460800 Baud.
Boot ist open.. Alles OK.
Starte den "Service Mode"...
Press Red key !
Autostart...
Achtung: Unterstützung für "S"75 befindet sich noch in der Beta Phase!
ÜTransfer boot...
Gestartet im "Service Mode" Ok
Erwarte Start des Telefons...
Erhalte Informationen:
Model: SIEMENS EL71 06 lg3
Telefon ist im "Format FFS?"
IMEI: 358941002472234
SecurityStatus: CustomerMode
HWID: 407
Akkuspannung: 3770 mV.

we need good Full Flash file from working EL71 (ELF1) for the rest of test
like ELF1 V23 Lg41

anyone have or can upload ??

nova75c · 12-07-2006, 02:50

BouRRi_GSM , how can i upload full flash !I have full flash ,read from another working phone with V_klay but after flash , phone dead.Only service mode!!

11-07-2006, 17:04	#1 (permalink)
pepik Freak Poster Join Date: Apr 2004 Location: Žilina Age: 44 Posts: 368 Member: 62102 Status: Offline Thanks Meter: 167	EL71 unlock problem with Papua I have EL71 for unlock. Martech box can ´t help me. I try Papua v0.9.1 /i connect TP to GND - press Do the Job - short time press red button on phone - disconnect TP /when "Pause 2 sec"/ Cable is ok - COM1 - 115200 baudrate Battery is full Here is a log : Press Red key ! Autostart... ÜTransfer Boot... BOOT geladen... Pause 2 Sec... Getting Information..... Unbekannter Flash (ID:0000) oder: 1) Fehler beim Testpoint setzen. 2) Not all contacts (Broken Balls). 3) Flashdefectiv 4) Oter part defective . 5) Defective cable . Boot ist open.. _______________________________________ and here is log from Setting - Information Model: SIEMENS ELF1 13 lg41 Telefon ist im "Normal Mode" IMEI: 35xxxxxxxxxxxxxx SecurityStatus: CustomerMode HWID: 407 Achtung: HWID passt nicht zum Telefon! Akkuspannung: 3904 mV. EELITE Info: free buffer 199424 bytes, free at all 206304 bytes, free for deleted 206304 bytes. EEFULL Info: free buffer 137760 bytes, free at all 466432 bytes, free for deleted 204352 bytes. Map Info: Date: 14/06/06, Variant: A 976, Std-Map/SW: 1/13, D-Map/Prov.: 101/61 Für erweiterte Informationen erst den SKEY senden! Laufzeit: 2106 Sekunden. Gesprächszeit: 15 Sekunden. FlashID(1) - Hersteller: 0020, Typ: 8819. Anzahl Displays: 1 DisplayID 1 Typ: Display EL71 Controller: . Any idea for unlock it ? or i doing something wrong ?

12-03-2006, 20:04	#5 (permalink)
BB-gsm No Life Poster Join Date: Jul 2004 Location: GEORGIA,Tbilisi Posts: 3,393 Member: 75765 Status: Offline Thanks Meter: 722	All about EL71 here and only here ! Hi, I will close all threads about EL71, and make this one STICKY, Please post about your problems and ideas only here, in this thread .. Regards

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
..:: Setool All Latast Models Flash Files [Only Here] ::..	nasirkhan007	SETool2	148	05-30-2017 13:51
All Other Phones Pinouts Request [Only Here]	shahzaadbutt	Various	36	10-07-2010 19:07
All BB5 Flash Files Post Only Here	zahed1978	Nokia Base Band 5 ( BB-5 )	149	03-01-2009 14:51
Re: All Nokia PM Files Request [Only Here]	florim	Nokia Hardware & Hardware Repair	3	12-02-2007 00:31

11-08-2006, 07:55	#2 (permalink)
debeliamark No Life Poster Join Date: May 2001 Location: Bulgaria Age: 56 Posts: 4,796 Member: 4627 Status: Offline Sonork: 57528:debeliamark Thanks Meter: 1,034	Probably new intel 897E flash IC inside ...

11-08-2006, 09:19	#3 (permalink)
pepik Freak Poster Join Date: Apr 2004 Location: Žilina Age: 44 Posts: 368 Member: 62102 Status: Offline Thanks Meter: 167	I try Papua v0.9.3b Here is a log : Rote Taste drücken! Autostart... Übertrage Boot... BOOT geladen... Testpoint bitte lösen! Weiter in 2 Sec... Erhalte Informationen... FlashID: 0000,0000 (64Mb) ELF1 SIEMENS 35xxxxxxxxxxxxxxx HASH: 4414D2E120C3905EC3FEEA56F2EE815F OTP ESN: Falsch! OTP IMEI: 000000000000000 Boot ist offen. Alles OK. Model: SIEMENS ELF1 13 lg41 Telefon ist im "Normal Mode" IMEI: 358941000639040 SecurityStatus: CustomerMode HWID: 407 Achtung: HWID passt nicht zum Telefon! Akkuspannung: 3883 mV. EELITE Info: free buffer 199424 bytes, free at all 206304 bytes, free for deleted 206304 bytes. EEFULL Info: free buffer 112960 bytes, free at all 466432 bytes, free for deleted 204352 bytes. Map Info: Date: 14/06/06, Variant: A 976, Std-Map/SW: 1/13, D-Map/Prov.: 101/61 Für erweiterte Informationen erst den SKEY senden! Laufzeit: 2813 Sekunden. Gesprächszeit: 15 Sekunden. FlashID(1) - Hersteller: 0020 (ST), Typ: 8819. Anzahl Displays: 1 DisplayID 1 Typ: EL71 Display Controller: Unbekannt .

12-03-2006, 19:01	#4 (permalink)
BouRRi_GSM Registered User Join Date: Jan 2005 Location: TuNiSiA Age: 43 Posts: 4,342 Member: 111457 Status: Offline Thanks Meter: 967	hi can u read the full flash from phone with papua & upload it? SIEMENS ELF1 13 lg41 thx

12-03-2006, 20:22	#6 (permalink)
BouRRi_GSM Registered User Join Date: Jan 2005 Location: TuNiSiA Age: 43 Posts: 4,342 Member: 111457 Status: Offline Thanks Meter: 967	thx BB-gsm to make one of EL71 thread sticky plz for all we have info or idea post here also post Full Flash and bcore from working phone thx

12-04-2006, 06:05	#7 (permalink)
nova75c Freak Poster Join Date: Mar 2004 Age: 42 Posts: 155 Member: 57358 Status: Offline Thanks Meter: 1	I have full flash from working phone.But how can i upload ? i can not unlock my EL71.Phone is ok but after 1 minute , it said :"phone locked , please turn off" !!!! Papuas said that : "must enter SKEY" .But Skey entered !

12-04-2006, 13:09	#8 (permalink)
foosoomin Junior Member Join Date: Aug 2006 Posts: 21 Member: 327368 Status: Offline Thanks Meter: 0	What cable do you use to unlock EL71 ? DCA-140 ?

12-04-2006, 14:21	#11 (permalink)
BouRRi_GSM Registered User Join Date: Jan 2005 Location: TuNiSiA Age: 43 Posts: 4,342 Member: 111457 Status: Offline Thanks Meter: 967	same cable and pinout like A31

12-04-2006, 15:26	#13 (permalink)
BouRRi_GSM Registered User Join Date: Jan 2005 Location: TuNiSiA Age: 43 Posts: 4,342 Member: 111457 Status: Offline Thanks Meter: 967	i don't know about name i make my cable by myself it's simple RJ45 cable with 3 wires (RX, TX & GND) & work with universal box use search that's so easy, this thread is not about cable pinout, it's about software problm of EL71 thx

12-05-2006, 23:23	#14 (permalink)
BouRRi_GSM Registered User Join Date: Jan 2005 Location: TuNiSiA Age: 43 Posts: 4,342 Member: 111457 Status: Offline Thanks Meter: 967	EL71 repair Bcore is okey like method posted by gehstock here Press Red key ! Autostart... ÜTransfer Boot... BOOT geladen... Pause 2 Sec... Getting Information..... FlashID: 0089,887E (64Mb) EL71 SIEMENS 358941002472234 HASH: 34A54B7C07AF4016CF440703F00CBEBC OTP ESN: BDEB2E6C OTP IMEI: 358941002472234 Geschwindigkeit 460800 Baud. Boot ist open.. Alles OK. Starte den "Service Mode"... Press Red key ! Autostart... Achtung: Unterstützung für "S"75 befindet sich noch in der Beta Phase! ÜTransfer boot... Gestartet im "Service Mode" Ok Erwarte Start des Telefons... Erhalte Informationen: Model: SIEMENS EL71 06 lg3 Telefon ist im "Format FFS?" IMEI: 358941002472234 SecurityStatus: CustomerMode HWID: 407 Akkuspannung: 3770 mV. we need good Full Flash file from working EL71 (ELF1) for the rest of test like ELF1 V23 Lg41 anyone have or can upload ??

12-07-2006, 02:50	#15 (permalink)
nova75c Freak Poster Join Date: Mar 2004 Age: 42 Posts: 155 Member: 57358 Status: Offline Thanks Meter: 1	BouRRi_GSM , how can i upload full flash !I have full flash ,read from another working phone with V_klay but after flash , phone dead.Only service mode!!