Cable problem with M65 - GSM-Forum

Rossifan · 01-07-2005, 12:22

Dear board members,
Last week i buyed original siemens dca-500 cable.
i`ll try to use it with,Flasher,V_Klay 3.1,Data Exchange Software,Mobile
Phone Manager,seems to be no contact with all of these programs!!!
When i put in *#06# the device tells me acc: plugged in: DCA-500
When i make contact with for example vissie,simoco,s25@once, there is no problem!
So what the **** is wrong or am i doing wrong!
It drives me crazy!!!!!
So if somebody would be so kindfull to help me out of this problem!

WbR
Rossifan

shurik · 01-07-2005, 20:53

You sure the correct COM ports are selected for those programs?

Rossifan · 01-07-2005, 21:01

Yep,i`m not a newbee
tried everything even on every com speed,but no succes!
I also heard that many times it`s a real hard thing to connect your M65 with pc programs!
Now i`m giving a list with thing i`ve tried:

Change com port speed in programs and computer: NO RESULT
Turning on/off the device :NO RESULT
Tried Eeprom tools : NO RESULT
i don`t know what is wrong,,,,,, maby it`s cable?
Like i said before i`m using DCA-500 and that should be original but very slow!

Need realy some help to solve this problem!
only this problem!

locer · 01-07-2005, 21:20

It is necessary for you DCA510 or no name 3 wires com cable.

kriak24 · 01-07-2005, 21:27

Flasher, v-klay and eeprom tool are not working with DCA500. DCA500 is just data cable. Not service one. For these softs you have to use service cable. If you want to modify DCA500 to work as service one, put 3.5 - 4.5V to pin 1 (+) and pin2 (ground). You can use e.g. charger as power supply. It is tested and it works.
But I can not understand, why MPM doesn't recognize M65. Try select "auto connection" in setup. And wait for a while. MPM works too slowly.

Rossifan · 01-07-2005, 21:28

Ok !
So my original cable will be useless ???
**** buyed that m***** for 15 euro !
If i knew this before,i would have buyed a 510 or no-name
Thanx anyway!

locer · 01-07-2005, 22:01

Do not save money and buy DCA510!!! You receive original, fast USB cable, with charge from USB, indication Rx, Tx, power + functions with all number line of phones x55-x6x and the software.

shurik · 01-07-2005, 23:55

What they all said.

I've a DCA 510, it's got the cool little green lights that shows when data's being transferred. Works just fine with V KLay and all the others.

Rossifan · 01-08-2005, 12:08

Ok thanx to all of you for the great help!
i`m gonna buy me that DCA-510,after i solved my dust problem!

Wbr
Rossifan

anuroj_007 · 01-08-2005, 12:49

Do this cable (DCA 500) has the same problem with CX65 too or only M65?

01-07-2005, 12:22	#1 (permalink)
Rossifan Freak Poster Join Date: Apr 2002 Location: Holland Age: 61 Posts: 289 Member: 11291 Status: Offline Thanks Meter: 0	Cable problem with M65 Dear board members, Last week i buyed original siemens dca-500 cable. i`ll try to use it with,Flasher,V_Klay 3.1,Data Exchange Software,Mobile Phone Manager,seems to be no contact with all of these programs!!! When i put in #06# the device tells me acc: plugged in: DCA-500 When i make contact with for example vissie,simoco,s25@once, there is no problem! So what the *** is wrong or am i doing wrong! It drives me crazy!!!!! So if somebody would be so kindfull to help me out of this problem! WbR Rossifan Last edited by Rossifan; 01-07-2005 at 12:54. Reason: Get rid of smileys

01-07-2005, 20:53	#2 (permalink)
shurik Junior Member Join Date: Nov 2003 Location: Ireland Age: 39 Posts: 37 Member: 43094 Status: Offline Thanks Meter: 0	hrm You sure the correct COM ports are selected for those programs?

01-07-2005, 23:55	#8 (permalink)
shurik Junior Member Join Date: Nov 2003 Location: Ireland Age: 39 Posts: 37 Member: 43094 Status: Offline Thanks Meter: 0	Meh What they all said. I've a DCA 510, it's got the cool little green lights that shows when data's being transferred. Works just fine with V KLay and all the others.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Problem With M65!	NELU-GSM	Siemens Hardware Repair Area	4	09-26-2006 23:19
problems with m65	PIHOC	S-Gold Based Phones	1	08-06-2006 15:44
Cables Problem with the new update 5.0	toukour	Blazer	16	10-02-2004 22:54
Data Cable problems with 3600	Jobe99	Nokia Multimedia	0	03-27-2004 16:25

01-07-2005, 21:01	#3 (permalink)
Rossifan Freak Poster Join Date: Apr 2002 Location: Holland Age: 61 Posts: 289 Member: 11291 Status: Offline Thanks Meter: 0	Yep,i`m not a newbee tried everything even on every com speed,but no succes! I also heard that many times it`s a real hard thing to connect your M65 with pc programs! Now i`m giving a list with thing i`ve tried: Change com port speed in programs and computer: NO RESULT Turning on/off the device :NO RESULT Tried Eeprom tools : NO RESULT i don`t know what is wrong,,,,,, maby it`s cable? Like i said before i`m using DCA-500 and that should be original but very slow! Need realy some help to solve this problem! only this problem!

01-07-2005, 21:20	#4 (permalink)
locer No Life Poster Join Date: Jan 2002 Location: Latvia Posts: 663 Member: 8435 Status: Offline Thanks Meter: 7	It is necessary for you DCA510 or no name 3 wires com cable.

01-07-2005, 21:27	#5 (permalink)
kriak24 Junior Member Join Date: Jan 2005 Location: Slovakia Age: 55 Posts: 9 Member: 103416 Status: Offline Thanks Meter: 0	Flasher, v-klay and eeprom tool are not working with DCA500. DCA500 is just data cable. Not service one. For these softs you have to use service cable. If you want to modify DCA500 to work as service one, put 3.5 - 4.5V to pin 1 (+) and pin2 (ground). You can use e.g. charger as power supply. It is tested and it works. But I can not understand, why MPM doesn't recognize M65. Try select "auto connection" in setup. And wait for a while. MPM works too slowly.

01-07-2005, 21:28	#6 (permalink)
Rossifan Freak Poster Join Date: Apr 2002 Location: Holland Age: 61 Posts: 289 Member: 11291 Status: Offline Thanks Meter: 0	Ok ! So my original cable will be useless ??? ** buyed that m*** for 15 euro ! If i knew this before,i would have buyed a 510 or no-name Thanx anyway!

01-07-2005, 22:01	#7 (permalink)
locer No Life Poster Join Date: Jan 2002 Location: Latvia Posts: 663 Member: 8435 Status: Offline Thanks Meter: 7	Do not save money and buy DCA510!!! You receive original, fast USB cable, with charge from USB, indication Rx, Tx, power + functions with all number line of phones x55-x6x and the software.

01-08-2005, 12:08	#9 (permalink)
Rossifan Freak Poster Join Date: Apr 2002 Location: Holland Age: 61 Posts: 289 Member: 11291 Status: Offline Thanks Meter: 0	Ok thanx to all of you for the great help! i`m gonna buy me that DCA-510,after i solved my dust problem! Wbr Rossifan

01-08-2005, 12:49	#10 (permalink)
anuroj_007 Freak Poster Join Date: May 2004 Age: 61 Posts: 315 Member: 66180 Status: Offline Thanks Meter: 0	Do this cable (DCA 500) has the same problem with CX65 too or only M65?