EL71 NO booting - GSM-Forum

johntrk · 07-28-2008, 23:31

Hello i read all posts above for EL71 but i am new to siemens phones and i have a problem still.
I have an EL71 that refuses to turn on. When i press the red button goes beep once and that is it. I know it is a software eeprom bug.
I downloaded papuas software and now what else do i need?
I have a serial cable.

Thank you.

dagos · 07-29-2008, 05:10

Quote:

Originally Posted by johntrk

Hello i read all posts above for EL71 but i am new to siemens phones and i have a problem still.
I have an EL71 that refuses to turn on. When i press the red button goes beep once and that is it. I know it is a software eeprom bug.
I downloaded papuas software and now what else do i need?
I have a serial cable.

Thank you.

...Open pauautils,Settings and click to Service Mode. Post here the log file to see what is wrong.
dagos

Mobilemaster138 · 07-29-2008, 07:02

update firm ware with siemens sevice tool MARTECH

johntrk · 07-29-2008, 15:19

Do i need testpoint to read the log?

shariff9482 · 07-29-2008, 15:36

Quote:

Originally Posted by johntrk

Hello i read all posts above for EL71 but i am new to siemens phones and i have a problem still.
I have an EL71 that refuses to turn on. When i press the red button goes beep once and that is it. I know it is a software eeprom bug.
I downloaded papuas software and now what else do i need?
I have a serial cable.

Thank you.

init service mode and just format ffs your phone 100% working

dagos · 07-29-2008, 17:25

Quote:

Originally Posted by Mobilemaster138

update firm ware with siemens sevice tool MARTECH

...SST (Siemens Service Toolbox) is one and Martech is other solution. Two diferent software and box.
Decide which!

dagos

dagos · 07-29-2008, 17:26

Quote:

Originally Posted by shariff9482

init service mode and just format ffs your phone 100% working

...and disapair the all files (except system files).
dagos

dagos · 07-29-2008, 17:28

Quote:

Originally Posted by johntrk

Do i need testpoint to read the log?

...not, you need only service cable.
dagos

johntrk · 07-30-2008, 17:26

Well it worked. I connected it and full erase the eeprom. Now works fine but i erased the t9 languages and i can not select greek for default input language.
In phone i selected greek ok.
Any ideas?

Thank you.

dagos · 07-30-2008, 17:36

Quote:

Originally Posted by johntrk

Well it worked. I connected it and full erase the eeprom. Now works fine but i erased the t9 languages and i can not select greek for default input language.
In phone i selected greek ok.
Any ideas?

Thank you.

...first you need to make ffsinit and after make the firmware upgrade. Use data cable for this.
dagos

johntrk · 07-30-2008, 20:24

All ok i fixed the phone but the security code is blocked.
How to remove the security code or unblock it?

johntrk · 07-30-2008, 21:15

Now by playing with papua i clicked on the tab FFS(2) with red letters and i think that i need to full flash the phone. Am i right?
If yes with what software where to find flash files?

Thank you a lot.

dagos · 07-31-2008, 04:27

Quote:

Originally Posted by johntrk

Now by playing with papua i clicked on the tab FFS(2) with red letters and i think that i need to full flash the phone. Am i right?
If yes with what software where to find flash files?

Thank you a lot.

...in this case, tes, you need to fullflash your phone. You need to use X65Flasher software (in attachemment) , fullflash file (with lower version) from http://rapidshare.com/files/11523143...6_lg3_full.rar and service cable. Before start flashing phone, you need to connect with papuautils, unlock your phone (if not is in the Factory mode), enter in the "Codes" menu, click on "x65flasher.ini" and save this file in the X65Flasher folder root. Other option is to fullflash your phone using testpointconnection. More detailes you have in this forum. After fullflash, you need to unlock your phone (direct calculation) and make firmware upgrade with language pack 0100 (greek language).
dagos

johntrk · 07-31-2008, 16:33

Diar DAGOS thank you for your files but when trying to flash i get timeout error.

Is there any other flasher to use?
I calculated the keys ok using testpoint.

Any ideas?

johntrk · 07-31-2008, 18:06

I managed to full flash the phone using winswap and files from a friend that had siemens service. All ok mobile turns on but error in menu.

I still can not flash with x65 flasher.

07-28-2008, 23:31	#1 (permalink)
johntrk Freak Poster Join Date: Apr 2001 Location: greece , Athens , Kifisia Age: 45 Posts: 211 Member: 4397 Status: Offline Thanks Meter: 3	EL71 NO booting Hello i read all posts above for EL71 but i am new to siemens phones and i have a problem still. I have an EL71 that refuses to turn on. When i press the red button goes beep once and that is it. I know it is a software eeprom bug. I downloaded papuas software and now what else do i need? I have a serial cable. Thank you.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
f480 no power no boot	syriana_mobile	Z3X-Team Products	1	01-07-2010 21:01
v3v boot a52 noflashing? no boot failed	leventturksoy	Smart-Clip	1	07-13-2007 19:03
EL71 no keys caculated...	edcentec	S-Gold Based Phones	11	04-16-2007 11:08
MDA t-mobile dead - no boot no bootloader mode	ziabahopsa	HTC & PDA WM( With Touchscreen)	5	12-03-2006 13:59
SE T610 dead no boot with RSA no boot with GO	gsm2	Twisterflasher	2	01-01-2005 01:03

07-29-2008, 07:02	#3 (permalink)
Mobilemaster138 Registered User Join Date: Apr 2008 Posts: 225 Member: 750605 Status: Offline Thanks Meter: 27	update firm ware with siemens sevice tool MARTECH

07-29-2008, 15:19	#4 (permalink)
johntrk Freak Poster Join Date: Apr 2001 Location: greece , Athens , Kifisia Age: 45 Posts: 211 Member: 4397 Status: Offline Thanks Meter: 3	Do i need testpoint to read the log?

07-30-2008, 17:26	#9 (permalink)
johntrk Freak Poster Join Date: Apr 2001 Location: greece , Athens , Kifisia Age: 45 Posts: 211 Member: 4397 Status: Offline Thanks Meter: 3	Well it worked. I connected it and full erase the eeprom. Now works fine but i erased the t9 languages and i can not select greek for default input language. In phone i selected greek ok. Any ideas? Thank you.

07-30-2008, 20:24	#11 (permalink)
johntrk Freak Poster Join Date: Apr 2001 Location: greece , Athens , Kifisia Age: 45 Posts: 211 Member: 4397 Status: Offline Thanks Meter: 3	All ok i fixed the phone but the security code is blocked. How to remove the security code or unblock it?

07-30-2008, 21:15	#12 (permalink)
johntrk Freak Poster Join Date: Apr 2001 Location: greece , Athens , Kifisia Age: 45 Posts: 211 Member: 4397 Status: Offline Thanks Meter: 3	Now by playing with papua i clicked on the tab FFS(2) with red letters and i think that i need to full flash the phone. Am i right? If yes with what software where to find flash files? Thank you a lot.

07-31-2008, 16:33	#14 (permalink)
johntrk Freak Poster Join Date: Apr 2001 Location: greece , Athens , Kifisia Age: 45 Posts: 211 Member: 4397 Status: Offline Thanks Meter: 3	Diar DAGOS thank you for your files but when trying to flash i get timeout error. Is there any other flasher to use? I calculated the keys ok using testpoint. Any ideas?

07-31-2008, 18:06	#15 (permalink)
johntrk Freak Poster Join Date: Apr 2001 Location: greece , Athens , Kifisia Age: 45 Posts: 211 Member: 4397 Status: Offline Thanks Meter: 3	I managed to full flash the phone using winswap and files from a friend that had siemens service. All ok mobile turns on but error in menu. I still can not flash with x65 flasher.