M55 flash patching(Thread for discussing)

[Loo]

well i try it, i remove the lenguage in the t9 , but i can´t remove the others lenaguage for the menu, my lgp have an error.... but i not where this because I make the patch but to not works me

[KeinEngel]

Okay, I believe that whoever explained how to use the patches to increase drive A's size was not quite specific. I've just reapplied the first patch (removes T9) after reflashing my phone. Now what? Do I read the langpack, size 0x10000, starting 9C0000, in the flash backup that I've saved, do I read size 0x10000 starting 5A0000 !? After that, what else should I do?

[kay]

Originally Posted by KeinEngel

Okay, I believe that whoever explained how to use the patches to increase drive A's size was not quite specific. I've just reapplied the first patch (removes T9) after reflashing my phone. Now what? Do I read the langpack, size 0x10000, starting 9C0000, in the flash backup that I've saved, do I read size 0x10000 starting 5A0000 !? After that, what else should I do?

To apply patch you must move your langpack to 0x9C0000! And your new langpack should not exceed 64 kb! That's all.

[Loo]

i not understant... what do i? (i speak english a little)
1- read this direccion 0x9C0000 size 0x10000, i have a .bin
2- descompile lg pack
3- modific this lgp
4- complile this lgp to the .bin
5- open that .bin and write this with direccion 0x9C0000 size 0x10000?

[kay]

Originally Posted by Loo

i not understant... what do i? (i speak english a little)
1- read this direccion 0x9C0000 size 0x10000, i have a .bin
2- descompile lg pack
3- modific this lgp
4- complile this lgp to the .bin
5- open that .bin and write this with direccion 0x9C0000 size 0x10000?

Read fflash, decompile langpack, remove all languages exclude needed, compile it back to flash, write fflash back, then read 0x5A0000 and save to langpack.bin, after this write langpack.bin to 0x9C0000, then apply patch for increasing disk A

[KeinEngel]

Originally Posted by Loo

i not understant... what do i? (i speak english a little)
1- read this direccion 0x9C0000 size 0x10000, i have a .bin
2- descompile lg pack
3- modific this lgp
4- complile this lgp to the .bin
5- open that .bin and write this with direccion 0x9C0000 size 0x10000?

I have put the english language pack online at http://www.siemens-m55.go.ro/lang_20...13_From_9C.bin .

BE SURE TO SAVE ALL YOUR FILES BEFORE APPLYING THE PATCHES! YOU WILL LOSE ALL THE DATA CURRENTY IN THE MEMORY, INCLUDING THE ADDRESS BOOK!!!

Use Smelter to extract the files from the fubu and copy them back when you are done applying the patch and the langpack. But before copying the files back, go to the file browser, hold down # and when the hidden folders appear, go to AddressBook and rename all the files, except .lock to anything you want. Then do the same with PersistentData\SMS\SMS.dat . Now you can copy all your data back using Siemens DES (Data Excange Software, just click the Mobile icon on the desktop). Ignore any errors. After all the files are on the mobile phone, turn it off and then back on.

Congradulations! After following these instructions, you have a lot more space on your handy!

I will look into the second patch (keeping one T9 language) later, right now I've got a couple of exams to pass

Cheers!

@kay PLEASE modify your post on the M55 Flash Patches thread so that people don't lose their data!

[Loo]

ok thanks you very much... but the direction is 0x5A0000 and the size?

[KoTsK]

well, i did like these...
- apply "increasing disk A up to 3.625MB w/ one lgpack & one T9" patch
- load 64kb langpack into 9C0000
- i didn't load any T9
- turn on the phone (it takes a couple seconds)

phone turned on but now the languages to be shifted!
it's not show the correct message, e.g. "camera" become "load", etc.!

need more specific explanation, plz !!!!!!!!

[Loo]

me too, phone turned on but now the languages to be shifted

[kay]

Originally Posted by KoTsK

well, i did like these...
- apply "increasing disk A up to 3.625MB w/ one lgpack & one T9" patch
- load 64kb langpack into 9C0000
- i didn't load any T9
- turn on the phone (it takes a couple seconds)

phone turned on but now the languages to be shifted!
it's not show the correct message, e.g. "camera" become "load", etc.!

need more specific explanation, plz !!!!!!!!

that's means, that langpack, which you uploaded to phone not from v11 (from v10). You must find langpack from v11

[kay]

Here is English langpack from v11
http://forum.allsiemens.com/download.php?id=1601

[anuroj_007]

Yesterday i had applied two patchs to my fone i can't apply the second patch , V_Klay had told me "some or all block had not old data or i had apply this patch already" i had apply two different patchs .What is wrong about the two patchs that i applied?
ps. one patch is profil logo on main screen and another is vibra status on main screen

[KeinEngel]

Speaking about the patch that increases disk A's size... Well, right now I've got 3.75 MB on drive A but number 9 from the digiclock is really screwed up. Where and HOW can i move it ?


Cheers!

[Loo]

i made my spanish langpack but now the languages to be shifted, help

[Loo]

-it is necessary have the 1.44 for disc B to have the new memory in the disc A?
-how i create that patch 337 k to find the disc b?
-how i apply the langpack(64k) in the m55?....... i dont know.
-Where i write that direction and that size? please more specific explanation