Death sl45i,Pls help!

[EmbaTa]

I tried to calibrate the battery of my sl45i(FW56),
a friend sent me a sensor tool and a blk file!
I couldn't open the sensor tool,that's why I searched
for one through internet(by google)and find it(but I
think that it was the wrong one-supporting siemens
C35,cos the blk file going with it was called C35blk)
Anyway i used that sensor tool,but with the blk file
for sl45,which my friend sent me,and at the end when I
had to press "write phone",by mistake I pressed "write
file"Then I hooked out the data cabel,tried to switch
on the phone and only a light appeared to the display
and immediately disappeared,and this happens by every
next try
Then I tried to do the procedure in the right way,by
pressing at the end "write phone",but when I hooked
the phone to the data cabel and the pc read that it is
connected,an error sign appeared on the monitor
saying:
Error-Unable to read Eelite BlockId=67info
Then I flashed 56FW again but it didn't help!
What should I do,I need my phone fixed!I'm totally confused,pls explain me by every step?Pls help me???????

GreetZ
EmbaTa

[Mishka]

First of all check battery voltage by multimeter - must be at least 3.7 V
Then start sensortool, wait until 4 or more blue squares appear at the bottom of sensortool window
Then put charged battery in phone, connect cable (must be chinese or without power supply from phone)
AND AT LAST SHORT PRESS ON POWER KEY
When your phone connect with program you will see SERVICE MODE on phone's display
In sensortools window you will see green word ACTIVE
then do everything with your phone

GOOD LUCK

[Drug_Store]

Originally posted by EmbaTa
I tried to calibrate the battery of my sl45i(FW56),
a friend sent me a sensor tool and a blk file!
I couldn't open the sensor tool,that's why I searched
for one through internet(by google)and find it(but I
think that it was the wrong one-supporting siemens
C35,cos the blk file going with it was called C35blk)
Anyway i used that sensor tool,but with the blk file
for sl45,which my friend sent me,and at the end when I
had to press "write phone",by mistake I pressed "write
file"Then I hooked out the data cabel,tried to switch
on the phone and only a light appeared to the display
and immediately disappeared,and this happens by every
next try
Then I tried to do the procedure in the right way,by
pressing at the end "write phone",but when I hooked
the phone to the data cabel and the pc read that it is
connected,an error sign appeared on the monitor
saying:
Error-Unable to read Eelite BlockId=67info
Then I flashed 56FW again but it didn't help!
What should I do,I need my phone fixed!I'm totally confused,pls explain me by every step?Pls help me???????

GreetZ
EmbaTa

Read old post next time...

Write new eeprom and remap.

[EmbaTa]

Originally posted by Drug_Store
Read old post next time...

Write new eeprom and remap.

Ok,thanx,but how do I write eeprom and remap,pls explain me by every step?
I need everything to be clear enough for me so I won't fail again Pls assist me???

[Drug_Store]

Originally posted by EmbaTa
Ok,thanx,but how do I write eeprom and remap,pls explain me by every step?
I need everything to be clear enough for me so I won't fail again Pls assist me???

Take on a clean eeprom or read it from another phone, write it with Unisiemens.

If you need clean eeprom, here get it on my site:
http://www.drug-store.itgo.com/SiemensEEprom.htm

Unisiemens can be found here:
http://www.drug-store.itgo.com/SiemensPageFls.htm

After writting eeprom, you´ll need to write IMEI.
Use Ksie 5.1.
Start it, enter on Security menu, click on Unlock / Change IMEI
Enter your IMEI, and press Change.

You also can get Ksie here:
http://www.drug-store.itgo.com/SiemensPageLog.htm

[EmbaTa]

Originally posted by Drug_Store
Take on a clean eeprom or read it from another phone, write it with Unisiemens.

If you need clean eeprom, here get it on my site:
http://www.drug-store.itgo.com/SiemensEEprom.htm

Unisiemens can be found here:
http://www.drug-store.itgo.com/SiemensPageFls.htm

After writting eeprom, you´ll need to write IMEI.
Use Ksie 5.1.
Start it, enter on Security menu, click on Unlock / Change IMEI
Enter your IMEI, and press Change.

You also can get Ksie here:
http://www.drug-store.itgo.com/SiemensPageLog.htm

Do I need to use a sync station,or the data cabel will do the trick?I have only the data cabel!

GreetZ
EmbaTa

[EmbaTa]

One more question,pls!
Do I have to use Win 98 to do the procedure?
What if I use Win 2000?

[Drug_Store]

Originally posted by EmbaTa
Do I need to use a sync station,or the data cabel will do the trick?I have only the data cabel!

GreetZ
EmbaTa

You can do it with data cable.
I personally I use XP, but if other kind of programs, 98 will be the most appropriated.

[EmbaTa]

Something is wrong:when I pressed write eeprom,scanning appeared,I hooked the phone into the data cabel,waited long and nothing happened!
What should I do?

[Drug_Store]

Originally posted by EmbaTa
Something is wrong:when I pressed write eeprom,scanning appeared,I hooked the phone into the data cabel,waited long and nothing happened!
What should I do?

Connect phone to COM1, powered off.
Now press write eeprom
When say scanning press phone red button.

[EmbaTa]

Ok thanX I did it ,now I reached the step to write an IMEI,could You tell me one,or where to find it?Pls

[EmbaTa]

Sorry for the previous message,but I was wrong!I appologize!
When I pressed the red phone button(after scanning),a window appeared on the screen saying:INVALID FILENAME!
What should I do now,btw I don't know what IMEI to use if I ever reach the step for writing IMEI
Help me PLS?!?

RegardZ
EmbaTa

[Drug_Store]

Originally posted by EmbaTa
Sorry for the previous message,but I was wrong!I appologize!
When I pressed the red phone button(after scanning),a window appeared on the screen saying:INVALID FILENAME!
What should I do now,btw I don't know what IMEI to use if I ever reach the step for writing IMEI
Help me PLS?!?

RegardZ
EmbaTa

Open Unisiemens,
Press Load File, and select a full flash
Now press Write Flash
When say "Scanning", press power on

When done, use Ksie 5.1 to write IMEI
You can find IMEI number under battery

All can be found at my site...

[EmbaTa]

I haven't done this yet,I'll do it but need more info?
Sorry for wasteing Your time!
You wrote me-press load file,do I have to load the eeprom.bin file?Also after doing this,am I supposed to use usimload to write eeprom to my phone,before useing Ksie,or I could go straight to Ksie and write new IMEI?Pls help!

ThanX in advance,
RegardZ
EmbaTa

[Drug_Store]

Originally posted by EmbaTa
I haven't done this yet,I'll do it but need more info?
Sorry for wasteing Your time!
You wrote me-press load file,do I have to load the eeprom.bin file?Also after doing this,am I supposed to use usimload to write eeprom to my phone,before useing Ksie,or I could go straight to Ksie and write new IMEI?Pls help!

ThanX in advance,
RegardZ
EmbaTa

Now you got me confused.

Let´s try again...

Press load file, select eeprom.bin
press write eep

when done

Use Ksie 5.1
Get on Security menu, click on Unlock/Change IMEI
Write your IMEI in there
press Change

All done

If you need more help, just ask.