GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > GSM & CDMA Phones / Tablets Software & Hardware Area > Samsung > QUALCOMM Models (3G)


QUALCOMM Models (3G) SGH-Z105x, SGH-Z107x, Z110, Z130, Z140, Z300, Z320i, Z500, Z510, ZM60, ZV10, ZV30, ZX10.

Reply
 
LinkBack Thread Tools Display Modes
Old 03-05-2009, 21:56   #1 (permalink)
Insane Poster
 
Join Date: Sep 2006
Posts: 82
Member: 358893
Status: Offline
Thanks Meter: 33
GUIDE: How to flash M8800 Pixon


OK this is the start and l hope that you all will consider and post any newer information.

First thing to always remember, is BACK UP YOUR PHONE, Pictures,wallpapers,music, and any contacts you have saved on your phone. I am not responsible for any damage to you, your phone, computer, or lost of data in this process. This is a guideline intended for professional technicians.
USE AT YOUR OWN RISK!!!
1. USB cable that came with your phone.
2. Samsung PC Studio 3 witch can be found here:
http://www.samsung.com/uk/support/d..._ia_cd=01011800
Install this software first, it contains the drivers for your phone, and has every thing you need for backup.
3. Multiloader v5,50 http://www.4shared.com/file/75565159...ader_V550.html
5. Newest unbrranded firmware http://www.megaupload.com/?d=B5CXDIOZ

-----------------------------Now you are ready to begin-----------------------------------
1. Make sure Samsung PC Studio is installed and communicates with your phone. And unpack the firmware in a folder you can easily find it.
2. Remove the Sim and MicroSD from your phone and replace the battery.
3. With the phone OFF connect the phone and computer with the USB cable.
4. While holding the no. 9 button on the phones key pad, tap the power button, the phone screen will come on black with a red stripe that says "Download" ( For Tocco and Pixon users : Hold down the "Volume -" button on the left side, and the "Camera" button on the right, then press the "Power" button = all three buttons need to be pressed together. Your phone should start up into a red\blue on black bootloader screen.)

5. Now run MultiLoader v5.33
6. Select the radio button that includes MSM6275/MSM6280.

7. Select Boot Change and Full Download.
8. Then click Boot, and select the boot files from the unpacked firmware folder.

9. Click the Amss, Rsrc1, and Rsrc2.
10. Then press the Factory FS tab, and select the appropriate files from the firmware folder also.
11. Select (Low).r2c NOT (Mid).r2c. (Phone may not restart if you select mid)
12. FOTA and ETC fields are left blank.

13. Click the Port Search button, it will find your phone and show the com port is ready.
14.Click the download button and be patient, this will take a few minutes to complete.

15.When it's finished, it will show "ok complete".

16.Unplug the phone from the USB cable, reinstall the sim, MicroSD, and power up the the phone.
17. Now with every thing complete, perform a hard reset by typing *2767*3855# into the hand set.
18. When the phone resets type *#1234# into your handset to check your new firmware ver.
  Reply With Quote
The Following 27 Users Say Thank You to kronos1 For This Useful Post:
Show/Hide list of the thanked
Old 03-05-2009, 21:59   #2 (permalink)
Insane Poster
 
Join Date: Sep 2006
Posts: 82
Member: 358893
Status: Offline
Thanks Meter: 33
Not yet tested so if any one do this please tell us your results...

BE SURE TO BACK UP all data you may need later!
  Reply With Quote
Old 03-06-2009, 22:35   #3 (permalink)
Junior Member
 
Join Date: Jan 2008
Posts: 3
Member: 669037
Status: Offline
Thanks Meter: 0
It's working great and support most EU countries.
  Reply With Quote
Old 03-07-2009, 08:02   #4 (permalink)
No Life Poster
 
Join Date: May 2005
Posts: 639
Member: 147039
Status: Offline
Thanks Meter: 87
today reflashed 5 m8800 tested.
  Reply With Quote
Old 03-07-2009, 09:35   #5 (permalink)
Freak Poster
 
mistahk's Avatar
 
Join Date: Dec 2007
Location: Poland
Posts: 331
Member: 653932
Status: Offline
Thanks Meter: 63
11. Select (Low).r2c NOT (Mid).r2c. (Phone may not restart if you select mid) - because? you know the difference or not?
17. Now with every thing complete, perform a hard reset by typing *2767*3855# into the hand set. - what for?
  Reply With Quote
Old 03-07-2009, 14:02   #6 (permalink)
Junior Member
 
Join Date: Mar 2009
Location: World is not enough ;)
Posts: 15
Member: 988844
Status: Offline
Thanks Meter: 4
Quote:
Originally Posted by kronos1 View Post
4. While holding the no. 9 button on the phones key pad, tap the power button, the phone screen will come on black with a red stripe that says "Download" ( For Tocco and Pixon users : Hold down the "Volume -" button on the left side, and the "Camera" button on the right, then press the "Power" button = all three buttons need to be pressed together. Your phone should start up into a red\blue on black bootloader screen.)
Is it possible to flash F480 with this firmware? Did anybody try to do this? What's the consequence? "freeze" "dead" or full operating?
  Reply With Quote
Old 03-07-2009, 15:20   #7 (permalink)
Insane Poster
 
Join Date: Sep 2006
Posts: 82
Member: 358893
Status: Offline
Thanks Meter: 33
Quote:
Originally Posted by Sammy_Tocco View Post
Is it possible to flash F480 with this firmware? Did anybody try to do this? What's the consequence? "freeze" "dead" or full operating?

NO THE TOCCO HAS DEFERENT FIRMWARE so ther is another theme in this forum with instructions for Tocco, it is no possible to import firmware of Pixon model into Tocco model..


Can any one please post what the improvements are with this newest firmware?'
  Reply With Quote
The Following 2 Users Say Thank You to kronos1 For This Useful Post:
Old 03-07-2009, 18:01   #8 (permalink)
Junior Member
 
Join Date: Mar 2008
Posts: 22
Member: 731904
Status: Offline
Thanks Meter: 2
Quote:
Originally Posted by kronos1 View Post
OK this is the start and l hope that you all will consider and post any newer information.

First thing to always remember, is BACK UP YOUR PHONE, Pictures,wallpapers,music, and any contacts you have saved on your phone. I am not responsible for any damage to you, your phone, computer, or lost of data in this process. This is a guideline intended for professional technicians.
USE AT YOUR OWN RISK!!!
1. USB cable that came with your phone.
2. Samsung PC Studio 3 witch can be found here:
http://www.samsung.com/uk/support/d..._ia_cd=01011800
Install this software first, it contains the drivers for your phone, and has every thing you need for backup.
3. Multiloader v5,50 http://www.4shared.com/file/75565159...ader_V550.html
5. Newest unbrranded firmware http://www.megaupload.com/?d=B5CXDIOZ

-----------------------------Now you are ready to begin-----------------------------------
1. Make sure Samsung PC Studio is installed and communicates with your phone. And unpack the firmware in a folder you can easily find it.
2. Remove the Sim and MicroSD from your phone and replace the battery.
3. With the phone OFF connect the phone and computer with the USB cable.
4. While holding the no. 9 button on the phones key pad, tap the power button, the phone screen will come on black with a red stripe that says "Download" ( For Tocco and Pixon users : Hold down the "Volume -" button on the left side, and the "Camera" button on the right, then press the "Power" button = all three buttons need to be pressed together. Your phone should start up into a red\blue on black bootloader screen.)

5. Now run MultiLoader v5.33
6. Select the radio button that includes MSM6275/MSM6280.

7. Select Boot Change and Full Download.
8. Then click Boot, and select the boot files from the unpacked firmware folder.

9. Click the Amss, Rsrc1, and Rsrc2.
10. Then press the Factory FS tab, and select the appropriate files from the firmware folder also.
11. Select (Low).r2c NOT (Mid).r2c. (Phone may not restart if you select mid)
12. FOTA and ETC fields are left blank.

13. Click the Port Search button, it will find your phone and show the com port is ready.
14.Click the download button and be patient, this will take a few minutes to complete.

15.When it's finished, it will show "ok complete".

16.Unplug the phone from the USB cable, reinstall the sim, MicroSD, and power up the the phone.
17. Now with every thing complete, perform a hard reset by typing *2767*3855# into the hand set.
18. When the phone resets type *#1234# into your handset to check your new firmware ver.
Being that this was copied from my site, Its only fare I post a link to the updated page.....


http://darkforestgroup.com/forum/ind...topic,2.0.html
  Reply With Quote
Old 03-07-2009, 19:16   #9 (permalink)
Insane Poster
 
Join Date: Sep 2006
Posts: 82
Member: 358893
Status: Offline
Thanks Meter: 33
Sorry l definitely forget to place link in the post, unfortunately not all is copied because links to the download area didn't worked on darkforestgroup, but still BIG THANK TO THE DARKFORESTGROUP FORUMS!
  Reply With Quote
Old 03-07-2009, 19:37   #10 (permalink)
Junior Member
 
Join Date: Mar 2009
Location: World is not enough ;)
Posts: 15
Member: 988844
Status: Offline
Thanks Meter: 4
Quote:
Originally Posted by kronos1 View Post
NO THE TOCCO HAS DEFERENT FIRMWARE so ther is another theme in this forum with instructions for Tocco, it is no possible to import firmware of Pixon model into Tocco model..
Excuse me for "stupid" question... why? Qualcomm is qualcomm.
  Reply With Quote
Old 03-07-2009, 20:05   #11 (permalink)
Junior Member
 
Join Date: Mar 2008
Posts: 22
Member: 731904
Status: Offline
Thanks Meter: 2
Quote:
Originally Posted by kronos1 View Post
Sorry l definitely forget to place link in the post, unfortunately not all is copied because links to the download area didn't worked on darkforestgroup, but still BIG THANK TO THE DARKFORESTGROUP FORUMS!
Its all fixed now, with new links and some added info. And you are welcome on my site anytime kronos1
  Reply With Quote
The Following User Says Thank You to northwoodinc For This Useful Post:
Old 03-07-2009, 20:48   #12 (permalink)
Freak Poster
 
Join Date: Jan 2009
Location: United Kingdom
Posts: 115
Member: 938611
Status: Offline
Thanks Meter: 43
Permission to add tutorial to Samsung Flash Wiki?
www.samsungflash****

  Reply With Quote
Old 03-09-2009, 20:50   #13 (permalink)
Junior Member
 
Join Date: Oct 2004
Age: 36
Posts: 13
Member: 85127
Status: Offline
Thanks Meter: 0
just incase anyone has problems with the serial port in use error bla bla.. i kept gettin it... so anyways write the bootloader first... when it restarts u get serial port error.... unplug usb... plug into another usb.... then untick boot let it find com an download.. it will write the rest

regards
  Reply With Quote
Old 03-09-2009, 21:24   #14 (permalink)
No Life Poster
 
ringtons's Avatar
 
Join Date: Dec 2004
Posts: 732
Member: 97600
Status: Offline
Thanks Meter: 97
Quote:
Originally Posted by Sammy_Tocco View Post
Excuse me for "stupid" question... why? Qualcomm is qualcomm.
so by your reasoning i should be able to flash a LG or Sharp qualcomm phone to a tocco then
  Reply With Quote
The Following User Says Thank You to ringtons For This Useful Post:
Old 03-14-2009, 00:29   #15 (permalink)
Freak Poster
 
Join Date: Jan 2009
Location: United Kingdom
Posts: 115
Member: 938611
Status: Offline
Thanks Meter: 43
I have made PDF format tutorial so that it can be printed off or saved etc.
If you would like to check it out go to
www.samsungflash****
then go to Tools and Tutorials
Wiki Navigation
SGH-M8800

Hope you like and let me know if you do or not
Same goes for the SGH-F480, that's available in PDF too.

******
Samsung Flash Wiki Admin
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
GUIDE: How to flash your F480 Tocco WestHej QUALCOMM Models (3G) 1462 03-17-2014 15:11
GUIDE: How to flash TELCEL's i617 jepetu Samsung Flashers, Software, Firmware. 19 08-02-2013 21:14
how to flash m8910 pixon ch_rathore Z3X-Team Products 3 12-05-2009 07:52
How to remove M8800 pixon phone lock? haider UST Pro II 3 02-11-2009 09:05
How to flash a M8800 Pixon chbiz Samsung Flashers, Software, Firmware. 1 01-22-2009 12:01

 



All times are GMT +1. The time now is 13:52.



Powered by Searchlight © 2020 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.47687 seconds with 9 queries

SEO by vBSEO