GUIDE: How to flash M8800 Pixon - Page 2 - GSM-Forum

icedome · 03-18-2009, 17:13

@jtaylor06

You forgot to include theese points on your guide mate:

7. Select Boot Change and Full Download.
8. Then click Boot, and select the boot files from the unpacked firmware folder.

I was getting an error I didn't find out why lol. Then I saw that was the lack of the 2 points

Cheers

jtaylor06 · 03-18-2009, 19:21

Quote:

Originally Posted by icedome

@jtaylor06

You forgot to include theese points on your guide mate:

7. Select Boot Change and Full Download.
8. Then click Boot, and select the boot files from the unpacked firmware folder.

I was getting an error I didn't find out why lol. Then I saw that was the lack of the 2 points

Cheers

Thanks

I'll edit it

bigboy85 · 03-18-2009, 19:33

hi mates does somebody know if the flash M880 BXXIB3 has spanis language i think it has it, but i´m not sure can somebody confirm it please?

thanks for your time

icedome · 03-18-2009, 21:15

Yap, it has spanish

cheers

robbosmg · 03-25-2009, 05:56

I've just flashed with M8800XEIA2 but now the phone loads up to a blank screen. I can here the loading music, but can't do anything with the phone as it's just got a black screen... Please help...

robbosmg · 03-25-2009, 06:30

Hello again.

Finally got the new firmware working. The problem now is that the phone was unlocked before, but now it is asking for a 'network lock' code. Can anybody help?

mistahk · 03-25-2009, 10:03

Quote:

Originally Posted by robbosmg

Hello again.

Finally got the new firmware working. The problem now is that the phone was unlocked before, but now it is asking for a 'network lock' code. Can anybody help?

probably was unlocked by some freaky patch, not the proper way with code.. in this case it will always be back after flashing
go to the gsm service you were and tell the to do it properly.

foufoutosx · 03-28-2009, 13:57

[quote=kronos1;4217482]OK this is the start and l hope that you all will consider and post any newer information.

4. While holding the no. 9 button on the phones key pad, tap the power button, the phone screen will come on black with a red stripe that says "Download" ( For Tocco and Pixon users : Hold down the "Volume -" button on the left side, and the "Camera" button on the right, then press the "Power" button = all three buttons need to be pressed together. Your phone should start up into a red\blue on black bootloader screen.)

quote]

The "Volume-" button is on the Right side of the Pixonn. I did try it though (pressing all 3 at te same time) and it didn't work. I also tried the camre button and the power button with all other buttons sa combinations and nothing. Please help me,

kronos1 · 03-30-2009, 00:18

Press volume down button,then camera button,and while you are holding this two press power on button...and wait for 5 seconds(or until multiloader screen appears) ..

aifab · 03-30-2009, 08:05

I used Multiloader V5.50 for flashing Samsung M8800 with chosen option "BOOT", and now the phone is dead :/

kronos1 · 03-30-2009, 14:34

Quote:

Originally Posted by aifab

I used Multiloader V5.50 for flashing Samsung M8800 with chosen option "BOOT", and now the phone is dead :/

please state the all process of uploading...first time l forget to check the boot and my phone was dead to..but then second time l did it all like in the first post and success everything was ok

topcom37 · 04-01-2009, 13:02

i full flashed my m8800 the way works perfectly. but my phone still freezed, i cant used the handset . is any one have an idea about this prob
thanks in advance

kronos1 · 04-01-2009, 23:18

Quote:

Originally Posted by topcom37

i full flashed my m8800 the way works perfectly. but my phone still freezed, i cant used the handset . is any one have an idea about this prob
thanks in advance

well try to flash it again....and do it on different usb plug in your pc

topcom37 · 04-02-2009, 11:49

i did . but same thing. what can caused this kind of problem ?
knowing the phone apear normal it read the sim and all seems ok but no touch function
please help

foufoutosx · 04-02-2009, 22:29

Quote:

Originally Posted by kronos1

Press volume down button,then camera button,and while you are holding this two press power on button...and wait for 5 seconds(or until multiloader screen appears) ..

mate I tried again and again and nothing... either I'm retarded or the keys are wrong.

03-25-2009, 05:56	#20 (permalink)
robbosmg Junior Member Join Date: Jan 2009 Posts: 3 Member: 953972 Status: Offline Thanks Meter: 0	Flash not worked I've just flashed with M8800XEIA2 but now the phone loads up to a blank screen. I can here the loading music, but can't do anything with the phone as it's just got a black screen... Please help...

03-25-2009, 06:30	#21 (permalink)
robbosmg Junior Member Join Date: Jan 2009 Posts: 3 Member: 953972 Status: Offline Thanks Meter: 0	New Problem Hello again. Finally got the new firmware working. The problem now is that the phone was unlocked before, but now it is asking for a 'network lock' code. Can anybody help?

04-01-2009, 13:02	#27 (permalink)
topcom37 Freak Poster Join Date: Mar 2009 Posts: 106 Member: 986493 Status: Offline Sonork: topcommunication Thanks Meter: 10	it works ...but i full flashed my m8800 the way works perfectly. but my phone still freezed, i cant used the handset . is any one have an idea about this prob thanks in advance

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GUIDE: How to flash your F480 Tocco	WestHej	QUALCOMM Models (3G)	1462	03-17-2014 15:11
GUIDE: How to flash TELCEL's i617	jepetu	Samsung Flashers, Software, Firmware.	19	08-02-2013 21:14
how to flash m8910 pixon	ch_rathore	Z3X-Team Products	3	12-05-2009 08:52
How to remove M8800 pixon phone lock?	haider	UST Pro II	3	02-11-2009 10:05
How to flash a M8800 Pixon	chbiz	Samsung Flashers, Software, Firmware.	1	01-22-2009 13:01

03-18-2009, 17:13	#16 (permalink)
icedome Junior Member Join Date: Nov 2004 Age: 41 Posts: 5 Member: 92186 Status: Offline Thanks Meter: 1	@jtaylor06 You forgot to include theese points on your guide mate: 7. Select Boot Change and Full Download. 8. Then click Boot, and select the boot files from the unpacked firmware folder. I was getting an error I didn't find out why lol. Then I saw that was the lack of the 2 points Cheers

03-18-2009, 19:33	#18 (permalink)
bigboy85 No Life Poster Join Date: Jan 2008 Location: colombia Age: 38 Posts: 615 Member: 682554 Status: Offline Sonork: 1601123 Thanks Meter: 222	hi mates does somebody know if the flash M880 BXXIB3 has spanis language i think it has it, but i´m not sure can somebody confirm it please? thanks for your time

03-18-2009, 21:15	#19 (permalink)
icedome Junior Member Join Date: Nov 2004 Age: 41 Posts: 5 Member: 92186 Status: Offline Thanks Meter: 1	Yap, it has spanish cheers

03-28-2009, 13:57	#23 (permalink)
foufoutosx Junior Member Join Date: Mar 2009 Posts: 2 Member: 999028 Status: Offline Thanks Meter: 0	[quote=kronos1;4217482]OK this is the start and l hope that you all will consider and post any newer information. 4. While holding the no. 9 button on the phones key pad, tap the power button, the phone screen will come on black with a red stripe that says "Download" ( For Tocco and Pixon users : Hold down the "Volume -" button on the left side, and the "Camera" button on the right, then press the "Power" button = all three buttons need to be pressed together. Your phone should start up into a red\blue on black bootloader screen.) quote] The "Volume-" button is on the Right side of the Pixonn. I did try it though (pressing all 3 at te same time) and it didn't work. I also tried the camre button and the power button with all other buttons sa combinations and nothing. Please help me,

03-30-2009, 00:18	#24 (permalink)
kronos1 Insane Poster Join Date: Sep 2006 Posts: 82 Member: 358893 Status: Offline Thanks Meter: 33	Press volume down button,then camera button,and while you are holding this two press power on button...and wait for 5 seconds(or until multiloader screen appears) ..

03-30-2009, 08:05	#25 (permalink)
aifab Crazy Poster Join Date: Mar 2004 Location: Poland Age: 46 Posts: 53 Member: 58485 Status: Offline Thanks Meter: 17	I used Multiloader V5.50 for flashing Samsung M8800 with chosen option "BOOT", and now the phone is dead :/

04-02-2009, 11:49	#29 (permalink)
topcom37 Freak Poster Join Date: Mar 2009 Posts: 106 Member: 986493 Status: Offline Sonork: topcommunication Thanks Meter: 10	i did . but same thing. what can caused this kind of problem ? knowing the phone apear normal it read the sim and all seems ok but no touch function please help