GSM-Forum

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   Off Topic Zone (https://forum.gsmhosting.com/vbb/f36/)
-   -   Hacking ISP for free internet or Bypass ISP Login Page! (https://forum.gsmhosting.com/vbb/f36/hacking-isp-free-internet-bypass-isp-login-page-2414077/)

XzZ 06-02-2018 10:14

Hacking ISP for free internet or Bypass ISP Login Page!
 

Hello everyone!

In this post, I m gonna share with you an awesome trick to bypass your
ISP login page and gain internet access for free! This trick should be working
on all WAN networks except Dial-up networks, networks which use a username
and password to connect are known as PPPoE will not work with this trick because
every client uses a different username and password. But it will work on Static IP
and DHCP networks!

http://sp-arrow.net/wp-content/uploads/2013/12/hr.png

Required Software:

Netcut: This is a program which finds IPs and MACs or Physical addresses
of the connected clients in your network. There are hundreds of users and
sometimes thousands in a particular ISP. This software has a user-friendly
interface which is quite easy for beginners!

http://sp-arrow.net/wp-content/uploads/2013/12/hr.png

Steps for Getting Free Internet!

  1. Download Netcut
  2. Install Netcut and run it.
  3. Now, you have to allow perhaps 10 seconds for the software to scan the
    connected clients and show their information.
  4. Now, as mention earlier that it will only work on DHCP and Static IP networks.
    You have to choose any one client and copy down it’s MAC Address and IP
    address in Notepad.
  5. Now we will have to change our computer’s Physical address and IP address.
    First of all, you have to go to Network and Sharing Center. Then click on Change
    Adapter Settings and right click on your adapter name and then click on Properties.
  6. Now click on Configure and move to Advanced tab. Then look for Network
    Address in the list, and then you will find that it is set to Not Present. Now tick
    or check Value and type the MAC address you copied from Netcut. This will restart
    your adapter, so wait 10 seconds until it reconnects properly.
  7. Now, it’s time to apply the IP we copied from Netcut. Now right click on your
    adapter name and click on Internet Protocol Version 4 (TCP/IPv4) and click on
    Properties. Now click on Use the following IP address. Fill the blanks like this:
    IP Address: Put the IP you got from Netcut.
    Subnet Mask: Use the same subnet mask you got from your ISP.
    Default Gateway: Use the same gateway IP you got from your ISP.
    To find the Subnet mask and Default gateway, you have to open up Command
    Prompt and type this command: IPCONFIG and you will find the subnet mask and gateway.

Note: If one client is not working, use another!

http://sp-arrow.net/wp-content/uploads/2013/12/hr.png

How does it Work?

For example, you are trying to access Google but when you press enter, instead
of going to Google, it will redirect you to the ISP login page or ISP Website. So
when you change your MAC and IP addresses, you change your identity and you
get access to the internet.

This trick can also speed up your internet. If the client you choose is from a big
company and uses an internet package which has a greater speed, you will get
the same speed as they get.

I think, this post will help you with getting free internet.

http://sp-arrow.net/wp-content/uploads/2013/12/hr.png

If you are using a Router

Hey guys, I got a huge number of questions on how to apply this on routers
because routers have become a common device which almost 90% of the Internet
users use. Well, I tried this and succeeded. Let’s see how you can do this on your
Router.

I don’t know all the router’s interface but this option is known as MAC Clone. You
can change your MAC address to the address you found on Netcut. Also change
your router connection setting to Static IP if it’s set to DHCP. You have to set the
IP as shown above. I hope that will help because it worked for me and I was enjoying
the free internet with my family. https://hackforums.net/images/smilies/biggrin.gif

The End!

http://sp-arrow.net/wp-content/uploads/2013/12/hr.png

I did not write this, I got it from this link!

I'm hopefully going to test this out soon!


All times are GMT +1. The time now is 23:10.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -

Page generated in 0.10643 seconds with 6 queries

SEO by vBSEO