stage 2 tp of w850 moyobo - GSM-Forum

faisal_sherry · 10-22-2008, 17:12

i have tried tp 15 and tp 23 and then one by one 19 as well for w850 MOYOBO flash chip but always error first tp is ok and that is tp 5 i wrote the gdfs as well but dont know whats wrong here's the log

--- Security Bypass------------------------------------------------------------
User selected phone W850 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 352401-01-909392-5
OTP CID = 49
EROM Color = 4 : RED
EROM CID = 49
Hint : Now the probe might be disconnected
Processing ...
Stage 1 completed succesfully
Stage 2 start
Timeout detected
Error : Failed.
--- Security Bypass------------------------------------------------------------
User selected phone W850 using Test Point boot mode
Stage 2 start
Timeout detected
Error : Failed.
--- Security Bypass------------------------------------------------------------
User selected phone W850 using Test Point boot mode
Stage 2 start
Timeout detected
Error : Failed.
--- Security Bypass------------------------------------------------------------
User selected phone W850 using Test Point boot mode
Stage 2 start
Error : Failed.

freeman2001 · 10-22-2008, 21:17

make stage 1 one more and passe to second tp if that dont help u attach dream operation file here like this the product supporter can sheck if wrong tp or programme bug

wbr

hackerbd · 10-22-2008, 22:02

Hello @faisal TP not connect with pin properly.Try to more i think you i'll be success..

faisal_sherry · 10-23-2008, 00:53

i can guarantee you bro tps are connected 1000% as this is not my first phone i've repaired many gdfs with dream box as u can see first stage is with success but dont know whats wrong with the 2nd tp i'll try to check the tp again and if it doesnt work i'll try to do it with the old version of dream box then will post the result thanks for you guys reply
br

soshan · 10-23-2008, 07:30

my brother chech pins 11&12

faisal_sherry · 10-23-2008, 14:48

checked 11 and 12 as well but no luck

swensonb · 10-27-2008, 18:16

have you tried pressing power on/off button while connected on stage 2 TP ?

works for me all the time on many stage 2 problems always worked for me...

post results

regards
swensonb
DB USER

el_venga · 10-28-2008, 16:04

also try pressuring the connector, that happened to me with a k810, which almost the same as w850 for tp.

cheong966 · 11-06-2008, 08:07

the 1st time you do it very difficult...
many time you do it... easy like 123

10-22-2008, 17:12	#1 (permalink)
faisal_sherry Banned Join Date: May 2006 Location: United Kingdom Posts: 1,089 Member: 270521 Status: Offline Sonork: 100.15962233 Thanks Meter: 369	stage 2 tp of w850 moyobo i have tried tp 15 and tp 23 and then one by one 19 as well for w850 MOYOBO flash chip but always error first tp is ok and that is tp 5 i wrote the gdfs as well but dont know whats wrong here's the log --- Security Bypass------------------------------------------------------------ User selected phone W850 using Test Point boot mode Stage 1 started 1) Turn OFF the phone. 2) Connect the phone to DreamBox cable. Boot Responce = 5A Processor ID = 99000301FFFFFFFF (DB2020 / DB2030) NOR Flash ID = 897E OTP Status = LOCKED OTP IMEI = 352401-01-909392-5 OTP CID = 49 EROM Color = 4 : RED EROM CID = 49 Hint : Now the probe might be disconnected Processing ... Stage 1 completed succesfully Stage 2 start Timeout detected Error : Failed. --- Security Bypass------------------------------------------------------------ User selected phone W850 using Test Point boot mode Stage 2 start Timeout detected Error : Failed. --- Security Bypass------------------------------------------------------------ User selected phone W850 using Test Point boot mode Stage 2 start Timeout detected Error : Failed. --- Security Bypass------------------------------------------------------------ User selected phone W850 using Test Point boot mode Stage 2 start Error : Failed.

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
K530 M39P0R907 Varient 1 stage 2 tp not detect	sharaz191	DreamBox	2	10-10-2008 12:54
K810 stage 2 TP problem	mughalG	DreamBox	4	06-11-2008 18:32
Here Help to fine the Stage 2 TP for W850...	harim_1981	DreamBox	1	05-09-2008 10:26

10-22-2008, 21:17	#2 (permalink)
freeman2001 No Life Poster Join Date: Dec 2005 Location: Barcelona Posts: 870 Member: 206476 Status: Offline Thanks Meter: 459	make stage 1 one more and passe to second tp if that dont help u attach dream operation file here like this the product supporter can sheck if wrong tp or programme bug wbr

10-22-2008, 22:02	#3 (permalink)
hackerbd No Life Poster Join Date: Mar 2006 Location: Bangladesh Posts: 1,196 Member: 247758 Status: Offline Sonork: 100.1574842 Thanks Meter: 259	Hello @faisal TP not connect with pin properly.Try to more i think you i'll be success..

10-23-2008, 00:53	#4 (permalink)
faisal_sherry Banned Join Date: May 2006 Location: United Kingdom Posts: 1,089 Member: 270521 Status: Offline Sonork: 100.15962233 Thanks Meter: 369	i can guarantee you bro tps are connected 1000% as this is not my first phone i've repaired many gdfs with dream box as u can see first stage is with success but dont know whats wrong with the 2nd tp i'll try to check the tp again and if it doesnt work i'll try to do it with the old version of dream box then will post the result thanks for you guys reply br

10-23-2008, 07:30	#5 (permalink)
soshan No Life Poster Join Date: Sep 2007 Location: iran-shushtar Posts: 3,552 Member: 592636 Status: Offline Thanks Meter: 674	my brother chech pins 11&12

10-23-2008, 14:48	#6 (permalink)
faisal_sherry Banned Join Date: May 2006 Location: United Kingdom Posts: 1,089 Member: 270521 Status: Offline Sonork: 100.15962233 Thanks Meter: 369	checked 11 and 12 as well but no luck

10-27-2008, 18:16	#7 (permalink)
swensonb Insane Poster Join Date: Apr 2005 Location: Pilipinas ! Age: 43 Posts: 86 Member: 137181 Status: Offline Thanks Meter: 3	have you tried pressing power on/off button while connected on stage 2 TP ? works for me all the time on many stage 2 problems always worked for me... post results regards swensonb DB USER

10-28-2008, 16:04	#8 (permalink)
el_venga No Life Poster Join Date: Apr 2007 Location: Dominican Republic Posts: 747 Member: 482218 Status: Offline Thanks Meter: 119	also try pressuring the connector, that happened to me with a k810, which almost the same as w850 for tp.

11-06-2008, 08:07	#9 (permalink)
cheong966 Freak Poster Join Date: Jul 2005 Location: Malaysia Posts: 227 Member: 157312 Status: Offline Thanks Meter: 72	the 1st time you do it very difficult... many time you do it... easy like 123