please help with Z610 death flashing with DCU60 - GSM-Forum

defcon2 · 11-18-2008, 00:52

I guess the phone had lower battery

Its my fault not check before. the phone does not power on.
could anybody tell me some solution?

best regards.

hi,

--- Reading Info---------------------------------------------------------------
User selected phone Z610 using DCU60 boot mode
1) Turn OFF the phone.
2) Hold <C> button and connect the phone to DCU60 cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 357830-01-xxxxxx-2
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 52
Starting CS Loader GDFS Service ...
GDFS Simlocks :
Lock 0 = LOCKED (02) [5/5] (Network)
Lock 1 = OFF (00) [5/5] (Network Subset)
Lock 2 = OFF (00) [5/5] (Service Provider)
Lock 3 = OFF (00) [5/5] (Corporate)
Lock 4 = OFF (00) [5/5] (SIM Card)
Lock 5 = OFF (00) [5/5] (Extended)
Operator code = 000-00
Software : R1JC002 prgCXC1250546_GENERIC_MY
Customization : CDA102579/72 TELEF_GEN
File system : cxc1250495

Done.

--- Loading Main Firmware file-------------------------------------------------
Loading "H:\UNLOCK2007\SonyEricsson\DREAMBOX\flash_main\Z6 10_R1JC002_MAIN_GENERIC_CID52.dtf"...
Model : Z610
Version : R1JC002
Done.

--- Writing firmware-----------------------------------------------------------
User selected phone Z610 using DCU60 boot mode
1) Turn OFF the phone.
2) Hold <C> button and connect the phone to DCU60 cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 357830-01-xxxxxx-2
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 52
DB2020 CID52 Security Bypass Stage 1 ... OK.
DB2020 CID52 Security Bypass Stage 2 ... OK.
Error : Entering "Security Bypass" failed. Patch is not possible.
Error : Failed.

131313 · 11-18-2008, 00:55

Quote:

Originally Posted by defcon2

I guess the phone had lower battery

Did you try with other battery?

Quote:

Originally Posted by defcon2

Error : Entering "Security Bypass" failed. Patch is not possible.
Error : Failed.

Did you try change settings?

defcon2 · 11-18-2008, 01:11

thanks, im trying conecting the phone to the power supply directly.
and it is flashing!!!!

i dont hope its works because the phone dont power even with the power supply. but seems that is enought for flash.

when flashing ends i tell you the results.

thanks

defcon2 · 11-18-2008, 01:13

ohhh its works again!!!

thanks

131313 · 11-18-2008, 01:44

You welcome.

Fully charged battery (or powersuply) is very important with SE phones.

11-18-2008, 00:52	#1 (permalink)
defcon2 Freak Poster Join Date: Sep 2002 Location: Spain Age: 54 Posts: 118 Member: 15514 Status: Offline Thanks Meter: 1	please help with Z610 death flashing with DCU60 I guess the phone had lower battery Its my fault not check before. the phone does not power on. could anybody tell me some solution? best regards. hi, --- Reading Info--------------------------------------------------------------- User selected phone Z610 using DCU60 boot mode 1) Turn OFF the phone. 2) Hold <C> button and connect the phone to DCU60 cable. Boot Responce = 5A Processor ID = 99000301FFFFFFFF (DB2020 / DB2030) NOR Flash ID = 897E OTP Status = LOCKED OTP IMEI = 357830-01-xxxxxx-2 OTP CID = 51 EROM Color = 4 : RED EROM CID = 52 Starting CS Loader GDFS Service ... GDFS Simlocks : Lock 0 = LOCKED (02) [5/5] (Network) Lock 1 = OFF (00) [5/5] (Network Subset) Lock 2 = OFF (00) [5/5] (Service Provider) Lock 3 = OFF (00) [5/5] (Corporate) Lock 4 = OFF (00) [5/5] (SIM Card) Lock 5 = OFF (00) [5/5] (Extended) Operator code = 000-00 Software : R1JC002 prgCXC1250546_GENERIC_MY Customization : CDA102579/72 TELEF_GEN File system : cxc1250495 Done. --- Loading Main Firmware file------------------------------------------------- Loading "H:\UNLOCK2007\SonyEricsson\DREAMBOX\flash_main\Z6 10_R1JC002_MAIN_GENERIC_CID52.dtf"... Model : Z610 Version : R1JC002 Done. --- Writing firmware----------------------------------------------------------- User selected phone Z610 using DCU60 boot mode 1) Turn OFF the phone. 2) Hold <C> button and connect the phone to DCU60 cable. Boot Responce = 5A Processor ID = 99000301FFFFFFFF (DB2020 / DB2030) NOR Flash ID = 897E OTP Status = LOCKED OTP IMEI = 357830-01-xxxxxx-2 OTP CID = 51 EROM Color = 4 : RED EROM CID = 52 DB2020 CID52 Security Bypass Stage 1 ... OK. DB2020 CID52 Security Bypass Stage 2 ... OK. Error : Entering "Security Bypass" failed. Patch is not possible. Error : Failed.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hack Please Help Me ! whit death LG !	fusarista	FuriousGold	5	12-14-2009 22:19
Please Help, just need few flashing/unlocking answers - P520	lomna	Samsung Flashers, Software, Firmware.	3	02-03-2009 23:42
PLEASE HELP! NEED MY K850i FLASHED - GOT THE BLUE RING OF DEATH 'BROD' BUG!	vickylee2008	KULANKENDI Server	5	04-28-2008 14:18
Please Help k700i cid36 death	Devilscript	UFS2 + UFS3-Tornadoflasher	5	04-04-2006 12:35
Please help *** th4 language pack with russian language for vygis please	morzh	BF, BG, TH, BHx Series	1	09-04-2005 15:14

11-18-2008, 01:11	#3 (permalink)
defcon2 Freak Poster Join Date: Sep 2002 Location: Spain Age: 54 Posts: 118 Member: 15514 Status: Offline Thanks Meter: 1	thanks, im trying conecting the phone to the power supply directly. and it is flashing!!!! i dont hope its works because the phone dont power even with the power supply. but seems that is enought for flash. when flashing ends i tell you the results. thanks

11-18-2008, 01:13	#4 (permalink)
defcon2 Freak Poster Join Date: Sep 2002 Location: Spain Age: 54 Posts: 118 Member: 15514 Status: Offline Thanks Meter: 1	ohhh its works again!!! thanks

11-18-2008, 01:44	#5 (permalink)
131313 Freak Poster Join Date: Nov 2008 Posts: 144 Member: 892148 Status: Offline Thanks Meter: 26	You welcome. Fully charged battery (or powersuply) is very important with SE phones.