<< J200i Sollution for Repair Here only by SEMC Tool >>
 

Hi to all users!

After two days fighting with one Dead J200i finally I get it to work;)

In first place I have used all known methods finded in this forum,but none of them got te Job.So I get this in my hands....!

Phone state before my actions;):
Red light blinks when put cable/charger!
In ufs when monitoring power on sequence got always CRC1 Failed!!!!
As I have said I have tried all possible repair CRC functions with all other tools i have(DIV,UFS,SEMC Tool),no one couldt get it work,always CRC1 Failed!

So here is How to:
I have made by myself one eeprom file dummped from full flash from working mobile some times ago!I converted it from row binary to arm(SEMC tool) format!
Then I flashed it to Phone!
After that Repair CRC with SEMC and ... Phone powers ON;)

One Remark:If U recieve dead phone(if U dont know previous state of phone) or U put wrong flash files,FIRST WRITE FULL REPAIR FLASH and only if after that phone didnt power on,flash and EEPROM FIX!!!Next is Repair CRC operation,like J210i method U must wait phne to powers on by itself(DO NOT DISCONNECT CABLE UNTIL PHONE POWERS ON)
ENJOY,U have working J200 now:)

PS:Both FILES are in Support AREA,GET IT NOW:)
PS2:Try and post RESULTS
PS3: USE THIS FILE ON YOUR OWN RISK!!!
BR

Tested with J200i killed with J210_full_repair...:(
Only eprom dont help. And only with full flash by Randy_D4 repair was succesfull.

Big Thanks Randy_D4 !

big thanks for help in supporting this tool ;)

thanks bro, good work :D

regards
alex

what if the phone dont answer the software, meaning it wont boot? what to do? i have here one j200i wont boot to ufs,usbsmart,and cruiser.

May be you have hardware problem bos...

- Clean connector of phone
- Use a FULL CHARGED battery (charge in another good phone)

very very thanks Randy_D4

thanks but can you expalin how to make this file with usb smart , the eeprom file
and how to conver to usb format ,

This files are already converted for USB Smart format,so flash full repair flash and make CRC Repair,then if phone not powers up flash eeprom fix(no need to convert anything,just select eeprom fix like normal flash file) and remake CRC again.

BR

thanks but i would like to know for future for other models,

4 bytes start address - little endian
4 bytes length - little endian
raw binary data

Best regards,
Zulea

thn for job well done Boss...

great discovery..........roll on RANDY.

thanks for sharing mate!!!