t610 and other SE phones cannot unlock via t28 datacable. - GSM-Forum

gsm_unlock · 09-09-2005, 14:26

t610 and other SE phones cannot connect via t28 datacable.

always error|:

Connect to phone
Check if RSA is active
Bypass boot authority
ERROR: 0001A1

::.::SOUFIZ GSM::.:: · 09-09-2005, 14:29

hehehe try to boot it using on off bottom = power botton all will be ok

*phone-company* · 09-09-2005, 15:11

yes right....works perfect....all 2 sec press powerbutton short time until boot beginn

fanbang · 09-09-2005, 15:15

try clean the cable and phone contacts as well

gsm_unlock · 09-09-2005, 15:35

If I didnt push power ON button I didnt get this message .

always error|:

Connect to phone
Check if RSA is active
Bypass boot authority
ERROR: 0001A1

with other sw works well. via com1 with datacable or universal box always this error

zulea · 09-09-2005, 16:11

T28 cable work ONLY on new ARM based phones (K,Z, V, F, ...).
Is CLEAR written in SEMC Tool description!! Also more times written here on this forum!!
You have to get DSS-20/25 or Cruiser 4 in 1 cable.

Token2K · 09-09-2005, 18:30

@zulea:
here is my test with a 4in1 cable and a T630 after unlock & debranding:
(AVR ist not a problem)

Connect to phone
Check if RSA is active
Bypass boot authority
Initialize boot
Load data for flash
Upload ARM: "T630_Modem_Standard_R7A011.arm"
ERROR: 003608

i don't no, what is the problem ?!
"gsm-solutions" say the cable is the problem or a other tool has changed RSA-protect ... i have never use a other tool !!!
"gsm-solutions" has verified this problem, and only this problem when RSA=
unlocked, when RSA=locked - then is a flash not a problem !
now the question, can you make a option in semctool aka RSA=unlock / RSA=lock ???

... any idea's ?
yes, i can buy a DIV, and then make a flash - hmm, i'am will use
one tool aka usb-smart ... not more !

Thank You !
Token

Gsm2Extreme · 09-09-2005, 18:51

it is possible with t28 serial cable, problem is you have to press the ON button about 30 times.. hehehe

shadi · 09-11-2005, 02:03

Quote:

Originally Posted by zulea

T28 cable work ONLY on new ARM based phones (K,Z, V, F, ...).
Is CLEAR written in SEMC Tool description!! Also more times written here on this forum!!
You have to get DSS-20/25 or Cruiser 4 in 1 cable.

I THINK THE PROPLEM IN THE SOFT CAUSE I TRY Cruiser 4 in 1 cable
AND IHAVE THE SAME PROPLEM

Ron2pet · 09-11-2005, 04:24

Quote:

Originally Posted by Token2K

@zulea:
here is my test with a 4in1 cable and a T630 after unlock & debranding:
(AVR ist not a problem)

Connect to phone
Check if RSA is active
Bypass boot authority
Initialize boot
Load data for flash
Upload ARM: "T630_Modem_Standard_R7A011.arm"
ERROR: 003608

i don't no, what is the problem ?!
"gsm-solutions" say the cable is the problem or a other tool has changed RSA-protect ... i have never use a other tool !!!
"gsm-solutions" has verified this problem, and only this problem when RSA=
unlocked, when RSA=locked - then is a flash not a problem !
now the question, can you make a option in semctool aka RSA=unlock / RSA=lock ???

... any idea's ?
yes, i can buy a DIV, and then make a flash - hmm, i'am will use
one tool aka usb-smart ... not more !

Thank You !
Token

Try to pump the power button, its work for me

Best Regards,

Ron2pet

shadi · 09-11-2005, 04:30

Cruiser 4 in 1 cable

eblaster101 · 09-11-2005, 12:45

i used standard cable that came with it it unlocks just fine, i didnt press power button i pressed go on software and then plugged in cable to phone it automaticly recodnised it.

Token2K · 09-11-2005, 16:44

@ron2pet:
... no way ... error 3608 by arm-flash ...
... then, i must used a div with a other cable !
... i think now, the 4in1-cable is the problem with t610/630 ...
cu token

*phone-company* · 09-11-2005, 17:24

it works always with dss25.......it will be the next buy

tatospeed · 09-11-2005, 17:39

Is it the pinky type cable? If not Zulea Do you have a driver for the cable that came with my USB Smart? Similar to Pinky

09-09-2005, 14:26	#1 (permalink)
gsm_unlock Freak Poster Join Date: May 2005 Location: ITALY Age: 40 Posts: 182 Member: 146722 Status: Offline Thanks Meter: 3	t610 and other SE phones cannot unlock via t28 datacable. t610 and other SE phones cannot connect via t28 datacable. always error\|: Connect to phone Check if RSA is active Bypass boot authority ERROR: 0001A1

09-09-2005, 18:30	#7 (permalink)
Token2K Junior Member Join Date: Aug 2005 Posts: 16 Member: 175224 Status: Offline Thanks Meter: 0	@zulea: here is my test with a 4in1 cable and a T630 after unlock & debranding: (AVR ist not a problem) Connect to phone Check if RSA is active Bypass boot authority Initialize boot Load data for flash Upload ARM: "T630_Modem_Standard_R7A011.arm" ERROR: 003608 i don't no, what is the problem ?! "gsm-solutions" say the cable is the problem or a other tool has changed RSA-protect ... i have never use a other tool !!! "gsm-solutions" has verified this problem, and only this problem when RSA= unlocked, when RSA=locked - then is a flash not a problem ! now the question, can you make a option in semctool aka RSA=unlock / RSA=lock ??? ... any idea's ? yes, i can buy a DIV, and then make a flash - hmm, i'am will use one tool aka usb-smart ... not more ! Thank You ! Token Last edited by Token2K; 09-09-2005 at 20:13.

09-11-2005, 17:39	#15 (permalink)
tatospeed Freak Poster Join Date: Apr 2004 Posts: 142 Member: 63961 Status: Offline Thanks Meter: 11	What is dss25 Is it the pinky type cable? If not Zulea Do you have a driver for the cable that came with my USB Smart? Similar to Pinky

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
hi pls i need the unlock code for sendo s200 and other sendo phones	tiygyliar	Various	1	05-26-2005 10:15
Sonyericsson T610 And Other Models Online Server !!!	bahtiyar	Main Sales Section	0	07-02-2003 20:12
wanted: good suplier of unlock software and kits and other mobile phone stuff	PremierGSM	Main Sales Section	0	08-07-2002 23:51

09-09-2005, 14:29	#2 (permalink)
::.::SOUFIZ GSM::.:: Freak Poster Join Date: Mar 2004 Location: rap3g Age: 44 Posts: 449 Member: 59209 Status: Offline Thanks Meter: 19	hehehe try to boot it using on off bottom = power botton all will be ok

09-09-2005, 15:11	#3 (permalink)
phone-company No Life Poster Join Date: Mar 2004 Location: Nederlands / Germany / Danmark Age: 51 Posts: 2,461 Member: 60001 Status: Offline Sonork: 100.106474 Thanks Meter: 151	yes right....works perfect....all 2 sec press powerbutton short time until boot beginn

09-09-2005, 15:15	#4 (permalink)
fanbang No Life Poster Join Date: Jul 2004 Location: out there Posts: 1,042 Member: 73674 Status: Offline Thanks Meter: 91	try clean the cable and phone contacts as well

09-09-2005, 15:35	#5 (permalink)
gsm_unlock Freak Poster Join Date: May 2005 Location: ITALY Age: 40 Posts: 182 Member: 146722 Status: Offline Thanks Meter: 3	If I didnt push power ON button I didnt get this message . always error\|: Connect to phone Check if RSA is active Bypass boot authority ERROR: 0001A1 with other sw works well. via com1 with datacable or universal box always this error

09-09-2005, 16:11	#6 (permalink)
zulea No Life Poster Join Date: Jul 2001 Location: Inside Raskal pocket Age: 54 Posts: 3,316 Member: 5325 Status: Offline Thanks Meter: 8,448	T28 cable work ONLY on new ARM based phones (K,Z, V, F, ...). Is CLEAR written in SEMC Tool description!! Also more times written here on this forum!! You have to get DSS-20/25 or Cruiser 4 in 1 cable.

09-09-2005, 18:51	#8 (permalink)
Gsm2Extreme No Life Poster Join Date: Mar 2004 Location: The Netherlands Age: 40 Posts: 632 Member: 58493 Status: Offline Thanks Meter: 24	it is possible with t28 serial cable, problem is you have to press the ON button about 30 times.. hehehe

09-11-2005, 12:45	#12 (permalink)
eblaster101 Freak Poster Join Date: Apr 2005 Age: 42 Posts: 312 Member: 136598 Status: Offline Thanks Meter: 3	i used standard cable that came with it it unlocks just fine, i didnt press power button i pressed go on software and then plugged in cable to phone it automaticly recodnised it.

09-11-2005, 16:44	#13 (permalink)
Token2K Junior Member Join Date: Aug 2005 Posts: 16 Member: 175224 Status: Offline Thanks Meter: 0	@ron2pet: ... no way ... error 3608 by arm-flash ... ... then, i must used a div with a other cable ! ... i think now, the 4in1-cable is the problem with t610/630 ... cu token

09-11-2005, 17:24	#14 (permalink)
phone-company No Life Poster Join Date: Mar 2004 Location: Nederlands / Germany / Danmark Age: 51 Posts: 2,461 Member: 60001 Status: Offline Sonork: 100.106474 Thanks Meter: 151	it works always with dss25.......it will be the next buy