v802sh reboot problem - GSM-Forum

aligsmpak · 09-21-2005, 20:43

i try to unlock 802sh by trying pressing unlock but it end up with SIM MEP so i flash the 5 files and now the phone is being initialize boot

SRAM Initialize : Completed!
Flash Format : Started!
Filysystem Format

and reboot and reboot
zulea pls help me phone com from Japan
thanks

baboom · 09-21-2005, 21:24

Try to reflash the phone with SPST .
For me works some times after bad flashing with SEtoll or CRUISER !!!
Just one 902SH go dead after several attempts flashings SPST - SEtool - CRUISER ... and so .....

!!! Be carefull !!!!

aligsmpak · 09-22-2005, 12:36

which cabel to use for SPST flashing pls tell com or usb
thanks

kuno · 09-22-2005, 15:06

Quote:

Originally Posted by ali******

which cabel to use for SPST flashing pls tell com or usb
thanks

I use CRUISER - SETool (video cable with ext. 3v ) for flashing. (without batery).

For unlocking (with SPST) use com cable !!!

et.com · 10-08-2005, 11:08

I had same problem.. if you did not resolv it yet try this:
full flash with your tool (mine is HWK) (send all flash files)
after that phone should be in SRAM Initialize Complete, etc....
wait a 5/10 minutes like that (be sure you have full bat) and phone will end format some flash area ( you will not see anything in this time on screen, just be patient and wait)
phone will powers off.
now phone is OK, just power on and it will be alive again

tested on sh802 and SH902...
good luck

superwing1248 · 10-18-2005, 13:10

Do you mean to wait 5/10 mins when the screen become dark (backlight is on) until it turn off it self?

steven

Quote:

Originally Posted by et.com

I had same problem.. if you did not resolv it yet try this:
full flash with your tool (mine is HWK) (send all flash files)
after that phone should be in SRAM Initialize Complete, etc....
wait a 5/10 minutes like that (be sure you have full bat) and phone will end format some flash area ( you will not see anything in this time on screen, just be patient and wait)
phone will powers off.
now phone is OK, just power on and it will be alive again

tested on sh802 and SH902...
good luck

aligsmpak · 10-18-2005, 16:20

Quote:

Originally Posted by kuno

I use CRUISER - SETool (video cable with ext. 3v ) for flashing. (without batery).
For unlocking (with SPST) use com cable !!!

i check with out battery not flash with battery flash ok but reboot

superwing1248 · 10-19-2005, 12:32

My phone is back alive..hehe

aligsmpak · 10-25-2005, 18:29

Quote:

Originally Posted by superwing1248

My phone is back alive..hehe

pls tell me what you do with phone

09-21-2005, 20:43	#1 (permalink)
aligsmpak Freak Poster Join Date: Jun 2003 Location: lahore Age: 40 Posts: 233 Member: 31610 Status: Offline Thanks Meter: 5	v802sh reboot problem i try to unlock 802sh by trying pressing unlock but it end up with SIM MEP so i flash the 5 files and now the phone is being initialize boot SRAM Initialize : Completed! Flash Format : Started! Filysystem Format and reboot and reboot zulea pls help me phone com from Japan thanks

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Sharp V802sh rebooting after flash!	Dj King	Sharp 3G (USB-Smart)	9	05-30-2006 20:33
3650 reboot problem	Pretone	WD2 & APE (Symbian Phones)	1	05-06-2005 19:15
t300 sonyericsson auto reboot problem	domshak	Sony Ericsson Hardware Repair	2	11-15-2004 12:53
NHM 5 rebooting problem	srivignesh	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	07-25-2004 03:53
T610 reboot problem	mathis	Sony Ericsson	7	11-24-2003 16:55

09-21-2005, 21:24	#2 (permalink)
baboom No Life Poster Join Date: Mar 2004 Location: Athens - Greece Posts: 965 Member: 59935 Status: Offline Thanks Meter: 131	Try to reflash the phone with SPST . For me works some times after bad flashing with SEtoll or CRUISER !!! Just one 902SH go dead after several attempts flashings SPST - SEtool - CRUISER ... and so ..... !!! Be carefull !!!!

09-22-2005, 12:36	#3 (permalink)
aligsmpak Freak Poster Join Date: Jun 2003 Location: lahore Age: 40 Posts: 233 Member: 31610 Status: Offline Thanks Meter: 5	which cabel to use for SPST flashing pls tell com or usb thanks

10-08-2005, 11:08	#5 (permalink)
et.com Freak Poster Join Date: Aug 2004 Location: Coimbra - Portugal Age: 47 Posts: 372 Member: 77227 Status: Offline Thanks Meter: 26	I had same problem.. if you did not resolv it yet try this: full flash with your tool (mine is HWK) (send all flash files) after that phone should be in SRAM Initialize Complete, etc.... wait a 5/10 minutes like that (be sure you have full bat) and phone will end format some flash area ( you will not see anything in this time on screen, just be patient and wait) phone will powers off. now phone is OK, just power on and it will be alive again tested on sh802 and SH902... good luck

10-19-2005, 12:32	#8 (permalink)
superwing1248 Freak Poster Join Date: Jul 2005 Posts: 215 Member: 161906 Status: Offline Thanks Meter: 0	My phone is back alive..hehe