USB-Smart 6.8 with J210i - GSM-Forum

Mantikor · 04-06-2006, 14:26

I try repair J210i with this solution:

Here is procedure how to repair J210 phones
(this solve ANY software problems, no power up, ...)

- Use SEMC Tool v6.7 (or higher version)
- NOT use UFS/Twister as interface !!!
(use any other cable, Cruiser, Serial, DSS)
- Flash file J210_Full_Repair_Flash.arm
- Disconnect phone from cable after flash
- Remove battery from phone
- Insert battery to phone
- Connect phone to cable
- object ChkCalcCrc: TCheckBox
- Repair -> Remake CRC's (SCRC, DCRC1, DCRC2)
- Wait phone to power up before disconnect from cable !!!
- If required, read codes, put a SIM card and unlock

but always errror:

Press Power On to phone!
Bypass boot authority
Load data for flash
ERROR: 00A505

blaiseid · 04-06-2006, 14:29

What s your problem???

Mantikor · 04-06-2006, 14:49

With Twister error:

Press Power On to phone!
Bypass boot authority
Load data for flash
Upload ARM: "J210_Full_Repair_Flash.arm"
Sending Flash Part 1
ERROR: 00AD29

Mantikor · 04-06-2006, 14:50

Quote:

Originally Posted by blaiseid

What s your problem???

phone not power on and i try to repair it.

zulea · 04-06-2006, 16:02

Quote:

Originally Posted by Mantikor

With Twister error:

Press Power On to phone!
Bypass boot authority
Load data for flash
Upload ARM: "J210_Full_Repair_Flash.arm"
Sending Flash Part 1
ERROR: 00AD29

Use FULL CHARGED BATTERY.

ricson · 04-06-2006, 16:45

me tried flashing repair file first with cruiser then use usb smart remake crc option strange but phone alive.

but when using repair file from usb always have error

IR-GSM · 04-06-2006, 16:49

Dear Zulea

is this procedure work for j200 too?
I have many problem with j200
thx

Mantikor · 04-06-2006, 17:25

thanx, i try with cruiser.

fateh76dz · 04-06-2006, 17:36

The way herself applied and still he uncovered the former

Mantikor · 04-06-2006, 22:38

Ok, i flash j210 with cruiser with repair flash and after remake crc with usb-smart, phone alive!!! all my j210 work now!!!

p.s. thax 2 ricson for idea.

ramos · 04-06-2006, 22:44

When you unlock J210i with usb smart,always do this:
-after unlock wait for the phone power on itself.Don't unplugged the cable.Power off manually the phone and after you can unplug the cable.
If unfortunately your phone doesn't power on because you didn't follow this step,no panic,just unlock again the phone and follow steps.

Bohosh · 04-07-2006, 10:50

I have the same problem:

Press Power On to phone!
Bypass boot authority
Load data for flash
ERROR: 00A505

But with Cruiser -no problem with same cable and same battery!!!!

ihmgsm · 04-08-2006, 13:52

Yes there is a problem with j210i comunication. I successfully repaired one j210 with USB_Smart 6.8 following the described procedure but it take almost 3 hours to connect phone trying with many cables various supply voltage on MAX 232, external supplay for phone (varied betwenn 3.6 ~ 4.2V) and many more but still no good comunication and after repair i have not succeed to flash phone again with desired lang, because allways phone powred on itself.
Plase Zulea fix this problem.

gambitjam · 09-05-2006, 00:03

PLS POST
J210_Full_Repair_Flash.arm
HERE

gambitjam · 09-05-2006, 21:30

Hey!!

we do not abandon each other like ZULea did?

Why not just say ' i can use newer or something' because i don't see it on support site.

04-06-2006, 14:26	#1 (permalink)
Mantikor Freak Poster Join Date: Aug 2002 Location: Belarus Age: 45 Posts: 373 Member: 14420 Status: Offline Thanks Meter: 54	USB-Smart 6.8 with J210i I try repair J210i with this solution: Here is procedure how to repair J210 phones (this solve ANY software problems, no power up, ...) - Use SEMC Tool v6.7 (or higher version) - NOT use UFS/Twister as interface !!! (use any other cable, Cruiser, Serial, DSS) - Flash file J210_Full_Repair_Flash.arm - Disconnect phone from cable after flash - Remove battery from phone - Insert battery to phone - Connect phone to cable - object ChkCalcCrc: TCheckBox - Repair -> Remake CRC's (SCRC, DCRC1, DCRC2) - Wait phone to power up before disconnect from cable !!! - If required, read codes, put a SIM card and unlock but always errror: Press Power On to phone! Bypass boot authority Load data for flash ERROR: 00A505

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
k600i repair flash for usb smart semc 8.6	the real bender	SonyEricsson (USB-Smart)	0	07-25-2006 06:36
V600i cid49 VS USB Smart 6.5 :(	frenchi	SonyEricsson (USB-Smart)	5	02-28-2006 19:52
How to repair J210i after flash with usb-smart 6.4	pepgra	SonyEricsson (USB-Smart)	16	02-11-2006 16:01
usb smart can't connect with tornado on new usb driver of tornado	cobra02a	SonyEricsson (USB-Smart)	1	01-05-2006 06:38

04-06-2006, 14:29	#2 (permalink)
blaiseid No Life Poster Join Date: Aug 2003 Location: Town City Age: 54 Posts: 3,485 Member: 37735 Status: Offline Sonork: 100.103255 Thanks Meter: 205	What s your problem???

04-06-2006, 14:49	#3 (permalink)
Mantikor Freak Poster Join Date: Aug 2002 Location: Belarus Age: 45 Posts: 373 Member: 14420 Status: Offline Thanks Meter: 54	With Twister error: Press Power On to phone! Bypass boot authority Load data for flash Upload ARM: "J210_Full_Repair_Flash.arm" Sending Flash Part 1 ERROR: 00AD29

04-06-2006, 16:45	#6 (permalink)
ricson Banned Join Date: Dec 2002 Location: SWITZERLAND Age: 55 Posts: 1,561 Member: 18329 Status: Offline Thanks Meter: 144	me tried flashing repair file first with cruiser then use usb smart remake crc option strange but phone alive. but when using repair file from usb always have error

04-06-2006, 16:49	#7 (permalink)
IR-GSM Freak Poster Join Date: Oct 2004 Location: IRAN Age: 54 Posts: 235 Member: 86730 Status: Offline Thanks Meter: 6	Dear Zulea is this procedure work for j200 too? I have many problem with j200 thx

04-06-2006, 17:25	#8 (permalink)
Mantikor Freak Poster Join Date: Aug 2002 Location: Belarus Age: 45 Posts: 373 Member: 14420 Status: Offline Thanks Meter: 54	thanx, i try with cruiser.

04-06-2006, 17:36	#9 (permalink)
fateh76dz No Life Poster Join Date: Feb 2004 Location: -Algeria- Age: 47 Posts: 1,055 Member: 51746 Status: Offline Thanks Meter: 47	The way herself applied and still he uncovered the former

04-06-2006, 22:38	#10 (permalink)
Mantikor Freak Poster Join Date: Aug 2002 Location: Belarus Age: 45 Posts: 373 Member: 14420 Status: Offline Thanks Meter: 54	Ok, i flash j210 with cruiser with repair flash and after remake crc with usb-smart, phone alive!!! all my j210 work now!!! p.s. thax 2 ricson for idea.

04-06-2006, 22:44	#11 (permalink)
ramos Freak Poster Join Date: May 2004 Location: france Age: 43 Posts: 332 Member: 67076 Status: Offline Thanks Meter: 5	When you unlock J210i with usb smart,always do this: -after unlock wait for the phone power on itself.Don't unplugged the cable.Power off manually the phone and after you can unplug the cable. If unfortunately your phone doesn't power on because you didn't follow this step,no panic,just unlock again the phone and follow steps.

04-07-2006, 10:50	#12 (permalink)
Bohosh No Life Poster Join Date: Aug 2002 Posts: 1,948 Member: 14741 Status: Offline Thanks Meter: 119	I have the same problem: Press Power On to phone! Bypass boot authority Load data for flash ERROR: 00A505 But with Cruiser -no problem with same cable and same battery!!!!

04-08-2006, 13:52	#13 (permalink)
ihmgsm Freak Poster Join Date: Jun 2002 Location: Bulgaria Age: 48 Posts: 105 Member: 12612 Status: Offline Thanks Meter: 15	Yes there is a problem with j210i comunication. I successfully repaired one j210 with USB_Smart 6.8 following the described procedure but it take almost 3 hours to connect phone trying with many cables various supply voltage on MAX 232, external supplay for phone (varied betwenn 3.6 ~ 4.2V) and many more but still no good comunication and after repair i have not succeed to flash phone again with desired lang, because allways phone powred on itself. Plase Zulea fix this problem.

09-05-2006, 00:03	#14 (permalink)
gambitjam No Life Poster Join Date: Feb 2005 Location: HOME OF PEACE Posts: 661 Member: 113732 Status: Offline Thanks Meter: 90	PLS POST J210_Full_Repair_Flash.arm HERE

09-05-2006, 21:30	#15 (permalink)
gambitjam No Life Poster Join Date: Feb 2005 Location: HOME OF PEACE Posts: 661 Member: 113732 Status: Offline Thanks Meter: 90	Hey!! we do not abandon each other like ZULea did? Why not just say ' i can use newer or something' because i don't see it on support site.