L7 boot 08.D0 unlock OK with P2K 3.7 - GSM-Forum

panafax_gsm · 05-24-2006, 01:07

Connecting to phone ...
Connected to: 'Motorola Flash'
Connected OK
Bootloader version: 0300
Sending loader to phone ...
Loader sent OK.
Read Flash ID ...
Flash ID: 20000E88
Unlocking ...
Unlocked OK
Powering down...

phone unlocked and working fine.

..::Mr999::.. · 05-24-2006, 05:28

good info..

usb-smart giving good updates ..

**viru** · 05-24-2006, 06:18

L7 unlocked

Connecting to phone ...
Connected to: 'Motorola Flash'
Connected OK
Bootloader version: 0300
Sending loader to phone ...
Loader sent OK.
Read Flash ID ...
Flash ID: 89001088
Unlocking ...
Unlocked OK
Powering down...

usb smart good updates

Ehreen · 05-24-2006, 08:21

but this is thru tp right?

br

zulea · 05-24-2006, 16:00

Quote:

Originally Posted by grin

but this is thru tp right?

br

Do you know any software, box, server who can unlock L7 (Neptune LTE2 phones) without TP? Except IMEI based codes who comes directly from Motorola or network operator database and who are EXPENSIVE ENOUGH (only one code is more expensive than P2K activation on USB-Smart).

panafax_gsm · 05-24-2006, 21:18

don't worries Zulea I have all tools made by you and are very good and best priece . but where the option to read full flash on P2K tool.
it's is very important for people make flash from your country. I am from Brazil and not have flex for my country but I use flashbackup to read full backup and make flash and flex for brazil , but for bootloader up 07.D0 it very difficult. so please add this option to read and write full flash in BIN format. Also bootloader when need testpoint .

BR.

Greatgonzo · 05-25-2006, 03:11

@ panafax_gsm & zulea

The v3i that I'm trying to unlocking fails

with same flash ID (20000E88) as the L7.

I get:

Error reading PDS VARS (2)
ERROR: Unlock failed

As it has unlocked the L7, should it work on the v3i as well? I know zulea said it looked like the v3i was using a new flash chip and that he is looking at fixing that... but as the L7 unlocked ok - with the same flash ID makes me think... Is it the software or me not doing something right when trying to unlock it...?

panafax_gsm · 05-25-2006, 08:22

its V3i is working fine if yes I believe it's a small error on P2K tool .
please post here bootloader , software version and a full log .

**viru** · 05-25-2006, 10:05

This Flash Id (20000e88) Is Supported By P2k Tool 3.7

Greatgonzo · 05-25-2006, 11:33

V3i phone details:

Boot Loader - 0A.30
Flex version - SE7984AXXH1055
S/W version - R479_G_08.B4.34R (Updated it with the D&G)
DSP S/W Version - 631F1F00

This is what was output with the v3i

Connecting to phone ...
Connected to: 'Motorola Flash'
Connected OK
Bootloader version: 0300
Sending loader to phone ...
Loader sent OK.
Read Flash ID ...
Flash ID: 20000E88
Unlocking ...
Error reading PDS VARS (2)
ERROR: Unlock failed

The software hangs after 'Unlocking ...' I remove the battery and that's is when it shows

Error reading PDS VARS (2)
ERROR: Unlock failed

Any ideas?

panafax_gsm · 05-25-2006, 14:07

are you sure its a V3i not a V3r ? connect the phone on RSD with test point and see info " S Blank Neptune LTE " or " S Blank Neptune LTE2 ".

Greatgonzo · 05-25-2006, 14:17

Yep, it's a v3i - S Blank Neptune LTE2

It's also a pain in the arse too

infogsm · 05-25-2006, 15:36

good work from Zulea !!
till now i've unlocked some v360,v360v,l6,l7,c975,v980,v3x,.. and all are unlocked and working fine. really fantastic dongle for such cheap price !!
br

.::martian::.. · 05-26-2006, 16:14

Quote:

Originally Posted by grin

but this is thru tp right?

br

ang boboo ang futahhhhhhhhh,your ask like a kid..

Vansy · 05-26-2006, 16:28

MSSv4 can flash L6, L7 language no use tp. our usb-smart cannot do yet. now see some boxes change language no use tp.

05-24-2006, 01:07	#1 (permalink)
panafax_gsm Freak Poster Join Date: Apr 2005 Location: Brazil Age: 44 Posts: 405 Member: 139167 Status: Offline Thanks Meter: 13	L7 boot 08.D0 unlock OK with P2K 3.7 Connecting to phone ... Connected to: 'Motorola Flash' Connected OK Bootloader version: 0300 Sending loader to phone ... Loader sent OK. Read Flash ID ... Flash ID: 20000E88 Unlocking ... Unlocked OK Powering down... phone unlocked and working fine.

05-25-2006, 11:33	#10 (permalink)
Greatgonzo Freak Poster Join Date: Jul 2002 Location: Various places Age: 42 Posts: 118 Member: 14098 Status: Offline Thanks Meter: 1	V3i phone details: Boot Loader - 0A.30 Flex version - SE7984AXXH1055 S/W version - R479_G_08.B4.34R (Updated it with the D&G) DSP S/W Version - 631F1F00 This is what was output with the v3i Connecting to phone ... Connected to: 'Motorola Flash' Connected OK Bootloader version: 0300 Sending loader to phone ... Loader sent OK. Read Flash ID ... Flash ID: 20000E88 Unlocking ... Error reading PDS VARS (2) ERROR: Unlock failed The software hangs after 'Unlocking ...' I remove the battery and that's is when it shows Error reading PDS VARS (2) ERROR: Unlock failed Any ideas? Last edited by Greatgonzo; 05-25-2006 at 13:45.

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
L7 boot 08.D0 ,can unlock with smartmoto 1.23 ?	mccm	Smart-Clip	1	01-10-2007 06:54
How 2 unlock V235 with P2kTool 3.7	atukhi	Motorola P2k	14	11-30-2006 17:45
Moto L6 Boot 08.D0 Flashes	unlocker2000	Smart-Clip	3	06-20-2006 17:13
Should i use testpoint for flashing L6 boot 08.D0 ?	PSG	Motorola P2K (USB-Smart)	0	05-10-2006 11:40
L6 boot 08.D0 sw ver R3511_G_0A.52.26R lng needed	.::GT-GSM MAN::.	Smart-Clip	0	02-28-2006 02:23

05-24-2006, 05:28	#2 (permalink)
..::Mr999::.. No Life Poster Join Date: Jun 2005 Location: India ( Punjab ) / China Age: 38 Posts: 4,995 Member: 154749 Status: Offline Sonork: 100.92483 Thanks Meter: 1,048	good info.. usb-smart giving good updates ..

05-24-2006, 06:18	#3 (permalink)
viru Product Manager Join Date: Jan 2006 Location: 亚洲 / Asia Age: 36 Posts: 10,745 Member: 222198 Status: Offline Sonork: 100.102981 Thanks Meter: 3,813	L7 unlocked Connecting to phone ... Connected to: 'Motorola Flash' Connected OK Bootloader version: 0300 Sending loader to phone ... Loader sent OK. Read Flash ID ... Flash ID: 89001088 Unlocking ... Unlocked OK Powering down... usb smart good updates

05-24-2006, 08:21	#4 (permalink)
Ehreen Freak Poster Join Date: Mar 2004 Age: 51 Posts: 277 Member: 57617 Status: Offline Thanks Meter: 1	but this is thru tp right? br

05-24-2006, 21:18	#6 (permalink)
panafax_gsm Freak Poster Join Date: Apr 2005 Location: Brazil Age: 44 Posts: 405 Member: 139167 Status: Offline Thanks Meter: 13	don't worries Zulea I have all tools made by you and are very good and best priece . but where the option to read full flash on P2K tool. it's is very important for people make flash from your country. I am from Brazil and not have flex for my country but I use flashbackup to read full backup and make flash and flex for brazil , but for bootloader up 07.D0 it very difficult. so please add this option to read and write full flash in BIN format. Also bootloader when need testpoint . BR.

05-25-2006, 03:11	#7 (permalink)
Greatgonzo Freak Poster Join Date: Jul 2002 Location: Various places Age: 42 Posts: 118 Member: 14098 Status: Offline Thanks Meter: 1	@ panafax_gsm & zulea The v3i that I'm trying to unlocking fails with same flash ID (20000E88) as the L7. I get: Error reading PDS VARS (2) ERROR: Unlock failed As it has unlocked the L7, should it work on the v3i as well? I know zulea said it looked like the v3i was using a new flash chip and that he is looking at fixing that... but as the L7 unlocked ok - with the same flash ID makes me think... Is it the software or me not doing something right when trying to unlock it...?

05-25-2006, 08:22	#8 (permalink)
panafax_gsm Freak Poster Join Date: Apr 2005 Location: Brazil Age: 44 Posts: 405 Member: 139167 Status: Offline Thanks Meter: 13	its V3i is working fine if yes I believe it's a small error on P2K tool . please post here bootloader , software version and a full log .

05-25-2006, 10:05	#9 (permalink)
viru Product Manager Join Date: Jan 2006 Location: 亚洲 / Asia Age: 36 Posts: 10,745 Member: 222198 Status: Offline Sonork: 100.102981 Thanks Meter: 3,813	This Flash Id (20000e88) Is Supported By P2k Tool 3.7

05-25-2006, 14:07	#11 (permalink)
panafax_gsm Freak Poster Join Date: Apr 2005 Location: Brazil Age: 44 Posts: 405 Member: 139167 Status: Offline Thanks Meter: 13	are you sure its a V3i not a V3r ? connect the phone on RSD with test point and see info " S Blank Neptune LTE " or " S Blank Neptune LTE2 ".

05-25-2006, 14:17	#12 (permalink)
Greatgonzo Freak Poster Join Date: Jul 2002 Location: Various places Age: 42 Posts: 118 Member: 14098 Status: Offline Thanks Meter: 1	Yep, it's a v3i - S Blank Neptune LTE2 It's also a pain in the arse too

05-25-2006, 15:36	#13 (permalink)
infogsm Cheater -Don't Deal with him- Join Date: Nov 2002 Location: Tunisia Age: 45 Posts: 4,282 Member: 18022 Status: Offline Sonork: 1574868 Thanks Meter: 192	good work from Zulea !! till now i've unlocked some v360,v360v,l6,l7,c975,v980,v3x,.. and all are unlocked and working fine. really fantastic dongle for such cheap price !! br

05-26-2006, 16:28	#15 (permalink)
Vansy Banned Join Date: Sep 2003 Location: Cambodia Posts: 1,522 Member: 39069 Status: Offline Sonork: 100.1606677 Thanks Meter: 190	MSSv4 can flash L6, L7 language no use tp. our usb-smart cannot do yet. now see some boxes change language no use tp.