5230 flashing done but not power on
 

Processing File: RM-588_40.0.102_prd.core.C00
Boot...
CONNECT PHONE to USB and Power ON phone!
Pooling for phone...
\\?\nmwcd#vid_0421&pid_0106&if_oth#6&2249fc6d&0&00 #{4f919102-4adf-11d5-882d-00b0d02fe381}
Sending ULO code
Isa UPDAPP
RAP3NAND
PASUBTOC
UPDAPP
Pooling for device removal...
Device removed
Pooling for ADL device...
\\?\nmwcd#vid_0421&pid_0105&if_oth#6&5c6c9cd&0&00# {4f919102-4adf-11d5-882d-00b0d02fe381}
CMT Certificates
NOT SUPPORTED
Erase[291.75 MB]...
erasing APE [00040000 to 00082FFF]
erasing APE [00083400 to 003FFFFF]
erasing APE [00400000 to 007FFFFF]
erasing APE [00800000 to 00D5FFFF]
erasing APE [00D60000 to 09E5FFFF]
erasing APE [09E60000 to 0F47FFFF]
erasing APE [06EE0000 to 0915FFFF]
erasing APE [09160000 to 09E5FFFF]
in 11.41s
Flash[103.95 MB]...in 33.44s
* * Processed file in 53.25 seconds
Processing File: RM588_40.0.003_001_003_U002.uda.fpsx
Boot...
Pooling for ADL device...
\\?\nmwcd#vid_0421&pid_0105&if_oth#6&5c6c9cd&0&00# {4f919102-4adf-11d5-882d-00b0d02fe381}
Erase[0.00 MB]...
in 0.14s
Flash[9.37 MB]...in 3.31s
* * Processed file in 3.55 seconds
Processing File: RM-588_40.0.102_prd.rofs2.V25
Boot...
Pooling for ADL device...
\\?\nmwcd#vid_0421&pid_0105&if_oth#6&5c6c9cd&0&00# {4f919102-4adf-11d5-882d-00b0d02fe381}
Erase[0.00 MB]...
in 0.36s
Flash[26.45 MB]...in 9.25s
* * Processed file in 9.72 seconds
Processing File: RM-588_40.0.102.221.02_prd.rofs3.fpsx
Boot...
Pooling for ADL device...
\\?\nmwcd#vid_0421&pid_0105&if_oth#6&5c6c9cd&0&00# {4f919102-4adf-11d5-882d-00b0d02fe381}
Erase[0.00 MB]...
in 0.09s
Flash[6.40 MB]...in 2.25s
* * Processed file in 2.45 seconds
Restarting device...
Pooling for device removal...
Device disconnected.
* * * Phone flashing done in 1:12 minutes
Post Flash serial tunning of phone....
Pooling mode for full factory set...
V ICPR72_10w42.3/07-01-11/RM-588 (c) Nokia
IMEI: 352014043387385
Factory Default Settings...OK

same problem here, have you got the solution yet.

its simply a hardware problem