Looking for people who solder laptop chips with hot air 1 Attachment(s) Hello ! i am looking for people who solders NVIDIA, ATI and other laptop chipsets with hot air rework stations. i am using ok industries 3500 bga rework station. (metcal) but lot of chipsets are overheated when desoldering with original lead fre solder from factory. for example: to desolder chip GF-GO7600-H-N-B1 (DV9000) 3.5cm x 3.5cm i use homemade nozzle 3.7cm x 3.7cm not to damaged motherboard, need to use profile: 260c from bottom (±180c mesured on pcb) soak from top 150sec 230c peak 180sec 360c. but on the end i hear "pop" sound and i see crack around the chipset crystal. ---------------------------------------------------------------------------------------- If i take new chipset and reball it with solder balls Sn63Pb37 then all ok, from bottom 260c, from top 230c and solder melts. i need advices. thank you all... |
All times are GMT +1. The time now is 17:32. |
vBulletin Optimisation provided by
vB Optimise (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -