Z500 Cable pinouts pls ?

[mob-inter]

Hi,

Anywone got a diagram or instruction on making a cable that will work with
Furious 2 box samsung tools or UMTS.

Before anyone comes with that sarky post i have used the SEARCH function.

also x2 8110 com/usb cables (x1 from F2 box x1 purchased seperatly)

and also shorting pins 2+3 on com none of which i have had any joy with.

Cheers in advance.

[FuriouS TeaM]

Z500 is special. I need to catch a phone to make some test.

BR
Steve.

[.:hack3r2k:.]

Power on your phone (Models Z105, Z107v, Z500, Z500V, etc.......)

1- Enter code *7465625*28782# without a sim in the phone
2- Phone will display "Auto Subset Lock: Activated!"
3- Enter code *7465625*28638# without a sim again
3- Phone will display "Auto Network Lock: Activated!"
4- Now insert the sim and enjoy! Phone is Unlocked!

(NOTE: When you change sim to other operator repeat this process to unlock it for that operator also)


USB DRIVER




What do you need?

Software: WinIMEI 1.16, USB Drivers, EasyStudio (Optional but highly recommended). Links to software are at the end of this post.
Hardware: Computer running Win9x/NT/2000/XP, 1x Serial COM Port, 1x USB Port, 1x USB Data Link Cable(PCB429USE).

1. Extract all RAR archives into own empty folder.

2. Install the drivers for the phone. You only need to install the drivers from the folder Samsung CDMA USB Driver don’t mind the folder Samsung Mobile USB Driver.

3. Connect the phone to the computer using the USB Data Link Cable. If it asks you about drivers just choose to install the driver from a specific location and point it to the Samsung CDMA USB Driver folder or its subfolder.

4. Now run the setup for EasyStudio and install it like any other application. Check what COM port the Samsung CDMA USB Driver has in the control panel under Phone and Modem options. If the port is higher than 10 force it to port 9 or less. Then go to the Settings Menu and choose Phone Monitor Settings. Look in the COM ports tab and check that the port with the CDMA USB Driver is enabled then press OK. Now it should find the phone. Choose File Manager to the left and then press backup on the top right then choose backup media. This is because WinIMEI might corrupt files. If the phone is not frozen a better option might be to just read the codes with WinIMEI and then enter them manually to unlock it without risk for file system corruption. (Skip this step if you enter codes manually).

5. Now connect the DB9 (partial) loopback connector to COM1. Look at the included picture for info on how to make one. All you have to do is short pin 2 with pin 3 as shown on the picture (look at the red line) and the COM1 port of your computer will now work as a (partial) loopback UART. This is required for WinIMEI to work.

6. Start WinIMEI (QIWS_V1.16(Service)_041011.exe) and on the first screen choose the USB COM port, leave the rest as is and press OK. On the next screen press UNLOCK. If everything went ok your phone is now unlocked! Or if you want to enter the unlock codes manually choose Read Settings instead.

7. Restore your media files with EasyStudio. (If you didn’t press UNLOCK you can skip this step).

8. Done!

FAQ:

Q: Why should i make sure the port in WinIMEI is set to 9 or less?

A: Serial ports in Windows are considered to be standard physical devices, that is why you should open any device in the following way: "\\.\COM10". Using the shortened name ("COM1" or "COM3") you can open only first 9 serial ports. More information on this issue can be found in MSDN.

Q: I can't do anything and it says "Phone Freeze", can I unlock this?

A: Yes! It will unfreeze and unlock your phone!







Easy Studio Part 1 of 2
http://www.savefile.com/files/2630324

Easy Studio Part 2 of 2
http://www.savefile.com/files/5195451

WinIMEI 1.16
http://www.savefile.com/files/5790105


Br

[irishclips]

Furious SAM 2 Tools will do them using the USB cable that comes with the phone
Have done 2 of them this week.
Z140v with SAM 2 Tools and Furious LG cable

[macoveii]

i unlocked this phone with Furious Sam.i used epi cable 8xxx and with the driver of zxx instaled on the support area.works very fine

[macoveii]

i forgot to say the 2and3 pin of com short

[mob-inter]

Cheers guy's going to check it all out now will let you know which one worked for me.

***Special thx to hack3r2k***

lol when hell of a tutorial if i get lost on this after that faq i quit.

[roniri]

Can somebody post here correct serial port pinout for zm60?

[lingkang]

hi i had follow ur instruction. i check my control panel and found my samsung cdma modem connected on com 3, and i had enable it and make it reserve on my easy studio setting, but the application didnt show me any response and didnt detect my phone, what is the problem ? please help. i am using data link usb cable.

[Amir-SkillZ]

Yeah Just Use Lg81xx Cable and Unlock OK 100%

[gody2]

For me the working pinouts for Z500 (tested by me) are :

10 - USB D- USB pin 3
15 - USB D+ USB pin 2
19 - GND USB pin 4
16 - Vcc USB pin1
9 - connected to Vcc

(on display on the phone is shown one little pc)