w376 TRACFONE unlock ok ::: GOOD WORK, ENJOY :::
 

w376 TRACFONE unlock ok

Connecting ...

Flash ID.: 89130100 , Intel 32 Mb.
Phone IMEI : 356893-01-131182-4
Phone Type : TRACFONE_H58S
Phone S/W : 6_1_31
Phone Flex : FLEX_A0_006
Phone L/P : 6131_NA1
Languages : English French Spanish

Phone Connected OK...
Making Eeprom Backup...
Reading Data...Please Wait......OK
Writing SpLock zone......OK

Phone Unlocked OK...

Polar never fail with this model. Unlock W376 even better that some traditionals tools to Motorola. But I need at least one unbranded flash to this model (No Tracfone) because I can´t convert to 900Mhz this specific model of Tracfone, they use different protocol in GSM. Something related with time on the air.
Can Polar Team edit some readed flash for us??????

Best Regards...............aslam870

2 pieces unlocked here enjoy with pb2:)


B.R tutu_gsm

With all respect, W376 from tracfone has a g after model, i mean, correct model would be W376g, every tool that unlocks Motorola ODM platform can perform this process succesfully, however, in order to use these kind of phones a generic firmware must be flashed because tracfone's firmware just wont let you make calls due tu it's nature. As of today there is no K3 generic firmwares available to public so, you can't use any of these K3 phones with other sim. All K3 models form tracfonme carry the g at the end of the model.
This concept also applies to every tracfone phone, LG, Nokia, all of them must be flashed with generic firmware.
Luck.

Yes ...correct.
Waste of time to unlock...because its not operational outside Tracfone Network....(without a generic flash)
Unless of coarse ..Polar team has re written firmware for this model.
Rule #1 with any TRACFONE or NET10 phone ...Full flash then unlock ..or you have nothing


;smokin

already support here in my PLACE now wait Team to support firmware that u like about unlocking is gone...

If you were capable to unlocked it with PB2, those are wonderful news for Device users. Furthermore, if someone want to use it at a specific GSM Telephone Network, just flash it with a Motorola Retail Flash similar to phone model.

Congratulations and good job! Here is a retail one:http://www.4shared.com/network/searc...lue=10&start=0

br.

My dear friend Y3KT, I´m just talking about unlock and change bands on this model. I use Polar with this specific model because when I try to unlock it with others tools like Infinity always got an error messege.
The only thing that I need is unbranded flash to erase any Tracfone restrictions. Is the only way to change bands and convert to 900 MHz. Of course, making some changes in hardware too.

Best Regards and see you soon.................aslam870

Y3KT is right!!! the software said fone unlock ok, but you need to flash it, but where is the generic firmaware?? no body have it.

Is that I said my friend. And the unbranding flash until this moment not exist because only Tracfone is selling this model. At least that I know.

We are waiting for this flash. I don´t know if is possible sending flash readed from any W376g tracfone to Polar support this team can edit or modify the file and create an unbranded flash (Generic Firmware)

Can you tell me something about this, The Gorr????????

Best Regards.............aslam870

working working working all readed firmware sent to programmer...

The programmer is going to have to re-write the ENTIRE flash..I wish him well :)
Since some boxes can dump this model easily...the programmer not only has to re-write the flash ..but add in protection from dumping by other boxes.

But then again..there is always the threat of removing the flash completely and dumping by way of a standalone programmer (LABTOOL).



:smokin

as previously posted, dont waste ur time with that, unlocking is not needed but flashing and there are no K3 flashes, so again dont waste ur time.