Z610i dead (blinking LED)

[usernome]

I tried to recover that phone :
I repaired EROM (via USB and via RS232)
When i try to flash it I get this (using 2+5 not "C" key because with "C" it doesn't react :

Hold 'C' or '@' (some PDA) key and plug DCU60 USB cable.
Phone Connected...
Detected: DB2020: K610,K790,K800,W850,V630,W710i(c),Z710i(c),Z610 Series
Error: K
Wrong BOOT mode!Be sure that You hold 'C' Key.

Via RS232 I get the same error .

Thanx !

[KulanKendi]

1. If phone not react for USB cable and 2+5 key then:
got to SETTINGS and click DETECT button, it will detect all com ports what are available and max speeds for them,select speed dipend of RS232 (USB>COM) device and mark option "use RS232 communication" and click APPLY. Now select EROM UPDATE option ONLY and click FLASH button, connect phone to cable and if UR cable is autoignition then U don't need to push POWER ON key, if UR cable is without autoginition then push POWER ON key for 0,5-1 sec. In both cases(autoignition or not and RS232 cable) U don't need to hold 2+5 keys - it works only for USB mode.
Let me know results.

b.r.

Originally Posted by usernome

I tried to recover that phone :
I repaired EROM (via USB and via RS232)
When i try to flash it I get this (using 2+5 not "C" key because with "C" it doesn't react :

Hold 'C' or '@' (some PDA) key and plug DCU60 USB cable.
Phone Connected...
Detected: DB2020: K610,K790,K800,W850,V630,W710i(c),Z710i(c),Z610 Series
Error: K
Wrong BOOT mode!Be sure that You hold 'C' Key.

Via RS232 I get the same error .

Thanx !

[usernome]

I said "Via RS232 I get the same error" .
I know that 2+5 doesn't have nothing to do with RS232 communication ...

[KulanKendi]

from information what U paste:
"Hold 'C' or '@' (some PDA) key and plug DCU60 USB cable."

it mean that U don't select "EROM Update" option in KKClient.
1. Select "EROM Update"
2. Click FASH PHONE button

in USB KK will show: "Hold 2 and 5 buttons together and plug DCU60 USB cable."
in RS232 mode KK will show: "Connect and Power ON phone."

b.r.

Originally Posted by usernome

I said "Via RS232 I get the same error" .
I know that 2+5 doesn't have nothing to do with RS232 communication ...

[usernome]

I repaired EROM that's what I said first .
I get the error when I try to flash it ...
"Via RS232 I get the same error" was for flash not for EROM

[KulanKendi]

So if U repaired phone EROM then red diode still blinks or not?
Holding 2+5 is ONLY for USB RECOVERY mode, like for Update EROM.
If U have EROM repaired then phone must communicate by holding "C" Key.
If phone not communicate by holding "C" key, then it mean that GDFS security block are damaged(wrong try to unlocking) and this can be solved by SE service.
btw. did diode blinks 6 times?

b.r.

Originally Posted by usernome

I repaired EROM that's what I said first .
I get the error when I try to flash it ...
"Via RS232 I get the same error" was for flash not for EROM

[usernome]

I don't know how many times blinks but it blinks ... after EROM repair

[KulanKendi]

if EROM Update not fix UR problem then it mean that U have damaged security information in GDFS, only SE service can fix it.

b.r.

Originally Posted by usernome

I don't know how many times blinks but it blinks ... after EROM repair