please help, w220 specific IMSI PUK :
 

i flash with ubl, unlock, repair, repair eeprom, still same problem...
how to solve this problem??
please help........

thank's.

There are 9 files for W220 eeprom repair in turbo support.
Just test with all and see which one is working, this have to repair your phone.
You no need to flash the phone if is power up, onlu eeprom repair.

BR,
Manole

i test one by one eeprom repair, and unlock,& repair. there 9 files eeprom repair cannot solve this problem......
thank's........

i have solved this problem buy infintybox

i also recomend you plz downgrade flex version
if problem not solve so plx downgrade all fw


WBR
Bluffmaster

thank for replay.. im download all firmware, and test flash all firmware,flex one by one, still same problem, the phone only change language but i m not backup flashfile.........

thank's

with ultima need make direct unlock and write any 8 digit.
today have same phone and this metod work.
phone ask for imsi puk,i enter 00000000,after ask for pin,enter also 8 zero
and phone become unlocked.
i'am not have UBL,with ultima box light not same metod?

i try enter 00000000, still cannot unlock...
thank's........

the phone now is alive, im use read full backup file write to phone, but phone no access now... how solve it, please help.........

thank,s.

Yesterday I paid for ultima box lite, today I have it.
Therefore exist solution for this problem ?
I have too one piece W220 with IMSI PUK messange, and I hope this box
can resolve my phone.

hello my phone now it ok, you have read fullbackup from another phone, then write to phone w220, after that the phone will no access, then write W220_EEPROM_Reapir_v05.bin the end press repair, the phone will be ok,
hope can solve your problem.

thank's

I try repair the phone but ultima box can't do this.
So please share your good full backup from good phone.

what's problem exactly on phone? he came dead or what?

I have w220 with message IMSI PUK, I try all eeprom repair but some
eeproms give no imei and other change message from PUK to PIN but
UBL can't read the codes, others can read the code but message is
IMSI PUK and codes not work.

this fullbackup file you can try it,

hope can sovle your problem......

thank's.

http://www.megaupload.com/?d=KNBMN5DS