try at K300.....
get error when finish write ppm.

Try to power on handset ...
Reading handset identificators ...
BOOT Signature: A1_DB2010_36_RED
CustomerID (flash): 36
CustomerID (OTP): 36
Handset IMEI: 35579500084397
Flash chip: 890D
Try to power on handset ...
Sending loader to handset RAM ...
Unpacking CPU file ...
Write CPU file: "K300_CHINA_R2AT003"
SUCCESS: write CPU flash
Unpacking PPM file ...
Write PPM file: "K300_APAC1_R2AT003"
SUCCESS: write PPM flash
Try to power on handset ...
Reading handset identificators ...
BOOT Signature: A1_DB2010_36_RED
CustomerID (flash): 36
Wait handset to power off ...
Write loader to handset flash ...
FAILURE: Code no 1953707

not possible to select

try it yourself

Downloading CPU file from server ...
Downloading PPM file from server ...
Try to power on handset ...
Reading handset identificators ...
BOOT Signature: A1_DB2010_49_RED
CustomerID (flash): 49
CustomerID (OTP): 49
Handset IMEI:
Flash chip: 2019
Try to power on handset ...
Write loader to handset flash ...
Wait handset to power off ...
Try to power on handset ...
Start loader from handset flash ...
Sending loader to handset RAM ...
Try to power on handset ...
Sending loader to handset RAM ...
Unpacking CPU file ...
Write CPU file: "W810_R4CK003_ZONE1_STANDARD"
SUCCESS: write CPU flash
Try to power on handset ...
Sending loader to handset RAM ...
Unpacking PPM file ...
FAILURE:
FAILURE: Code no 3003052

Tried to flash W810i and this was the result.
Phone works but with mixed R4CK003 and R4DB005 original customization that was on phone?
Any clues to error code?

Flash button disable problem
 

When flash file button is not enabled it means that for the specified phone the flashing is still under development (you are unable to select customization yet), just try again it will work in a short time.

Regards

yesterday logged in ok but today i get invalid ip address have been back to web site to try and reset ip address but it needs 5 days to reset please can you advise?>

I have the same problem :confused:


My machine is:
Athlon64 3000+
Asus K8N4E deluxe
1GB Ram

Can`t flash SE Z530, just before start writing the main flash to the phone, the message appears:"FAILURE: Code no 1961445"

Here it is:

Start loader from handset flash ...
Sending loader to handset RAM ...
Try to power on handset ...
Sending loader to handset RAM ...
Unpacking CPU file ...
Write CPU file: "Z530_R6BA030_GENERIC"
FAILURE: Code no 1961445

k300 , read unlock code by UFS

Try to power on handset ...
Reading handset identificators ...
BOOT Signature: A1_DB2010_36_RED
CustomerID (flash): 36
Wait handset to power off ...
Write loader to handset flash ...
FAILURE: Code no 1953707

not working.................................

i havent got log but sucesffuly unlocked w810 and k750i cid 36

thanks great tool sometimes buggy when picking up phone thoguh as phone seems to boot

ok I will try again later

B.T.W. unlock Z530i worked like a charme :)


greetzzz

I managed to flash/unlock Z530 without problem, but had to use other flash file, the most recent one - "Z530_R6DA001_GENERIC". Maybe "Z530_R6BA030_GENERIC" is damaged?

Try now. New update is ready and will be downloaded automaticly.

GOT

Reset IP!!!
 

Please solve this IP restriction cause my adsl provider change IP every
day, so i must wait 5 days now to test GOT???:mad:
I tried to reset IP but is locked to 5 days(too much!!!);
I hope that You solve this real problem;
Regards, ddgsm.

Can't start new client . :( I'm trying two times - still the same :eek: