j300 error
got i want to know why its gives this eroor ??
Try to power on handset ...
Reading handset identificators ...
BOOT Signature: A1_DB2010_36_RED
CustomerID (flash): 36
CustomerID (OTP): 36
Handset IMEI: 35619500315986
Flash chip: 200D
Try to power on handset ...
Sending loader to handset RAM ...
FAILURE: Code no 1953470
wink shafeeq
geo mobiles

Please tell me, how you flash it, 'cause i get ERROR all time

i can help u using got server to flash and recover ur phones
[email protected]

u can't use got flash files for usb-smart dear

can not able to repair ''damaged eprom'' w810i

white screen , can call and recieved but everyhting in white screen

have tried to flash EEPROM

Downloading EEPROM file from server ...
Try to power on handset ...
Reading handset identificators ...
BOOT Signature: A1_DB2010_36_RED
CustomerID (flash): 36
CustomerID (OTP): 36
Handset IMEI:xxxxxxxxxxxxxxx
Flash chip: 200D
Try to power on handset ...
Sending loader to handset RAM ...
Unpacking EEPROM file ...
Write EEPROM file: K750_EEPROM
SUCCESS: write EEPROM flash
SUCCESS: All operations


Try to power on handset ...
Reading handset identificators ...
BOOT Signature: A1_DB2010_36_RED
CustomerID (flash): 36
CustomerID (OTP): 36
Handset IMEI: xxxxxxxxxxxxxx
Flash chip: 200D
Try to power on handset ...
Sending loader to handset RAM ...
Unpacking CPU file ...
Write CPU file: "K750_R1AA008_CHINA"
SUCCESS: write CPU flash
Unpacking PPM file ...
Write PPM file: "K750_R1AA008_APAC1"
SUCCESS: write PPM flash
Try to power on handset ...
Reading handset identificators ...
BOOT Signature: A1_DB2010_36_RED
CustomerID (flash): 36
CustomerID (OTP): 36
Handset IMEI: xxxxxxxxxxxxxxxx
Flash chip: 200D
Try to power on handset ...
Send 2nd loader to handset ...
Change BOOT signature to BROWN
Try to power on handset ...
Send 2nd loader to handset ...
Removing network locks ...
Clear error string (xExW) ...
SUCCESS: Network locks removed
Change BOOT signature to RED
Download customization file
Try to power on handset ...
Reading handset identificators ...
BOOT Signature: A1_DB2010_36_RED
CustomerID (flash): 36
CustomerID (OTP): 36
Handset IMEI: xxxxxxxxxxxxxxxxx
Flash chip: 200D
Try to power on handset ...
Sending explorer loader to handset ...
Setup explorer loader ...
Unpack customization file
Write CDA package to handset ...
SUCCESS: All operations

still white screen


please help

S700i flashing good :)
its cool
Thanks

i think it is not possible to flash or unlock any w700i with GOT , that is y there is no reply for my post ?
is that so ?

v3 PDS repair failed
 

I was trying to repair the pds area of a motorola v3 but got this error:
Establish connection to handset
FLASH Interface established ok
Read handset bootcore version
Bootcore version on handset: 0000
Sending RAMDLD to handset
ERR: LTE GETRDYSTR 002
ERR: LTE REPAIRNEW32M 0A3

I made testpoint and tried again but got the same error. Pls GOT team, whats wrong. Pls let me know so i can pass tru the right procedure. Thanks in advance

user name password
 

where i get got user name password

Send ur request @
[email protected]

or

[email protected]

Luck.

K510i...CID49...one more...success...
 

I unlocked one more K510i...CID49

During work....software stop after step "Insert battery and connect cable"...it didn't want switch on !!!!

I repeat operation from begining and success...the phone unlocked.


Try to power on handset ...
Reading handset identificators ...
BOOT Signature: A1_DB2010_49_RED
CustomerID (flash): 49
CustomerID (OTP): 49
Handset IMEI: 359148001xxxxx
Flash chip: 897E
Try to power on handset ...
Write loader to handset flash ...
Wait handset to power off ...
Try to power on handset ...
Start loader from handset flash ...
Reading CXC version string ...
CXC version: R4CH003_CXC1250231_GENERIC_CO
Sending loader to handset RAM ...
Write 2nd loader to handset flash ...
Try to power on handset ...
Start 2nd loader from handset flash ...
Restore flash to original CXC version ...
Setup 2nd loader ...
Removing network locks ...
Clear error string (xExW) ...
SUCCESS: Network locks removed
SUCCESS: All operations

Thanks

tried to unlock z530i get the error message:


Try to power on handset ...
Reading handset identificators ...
BOOT Signature: A1_DB2010_49_RED
CustomerID (flash): 49
CustomerID (OTP): 49
Handset IMEI: 35933600784048
Flash chip: 2019
Try to power on handset ...
Write loader to handset flash ...
Wait handset to power off ...
Try to power on handset ...
Start loader from handset flash ...
Reading CXC version string ...
CXC version: R6BA030_CXC1250454_GENERIC_MU
Sending loader to handset RAM ...
Write 2nd loader to handset flash ...
FAILURE: Code no 1962701

tried another k310i, same problem, same code error. phone dead after.

software v0034, on 11/12/2006

ps. problem solved by re-flashing!

hello GOT team
i hv problem for flashing heres the log help me pls, the phone problem before is hanging but now its dead.

Reading handset identificators ...
BOOT Signature: A1_DB2010_49_RED
CustomerID (flash): 49
CustomerID (OTP): 49
Handset IMEI: 35998800657332
Flash chip: 2019
Try to power on handset ...
Write loader to handset flash ...
Wait handset to power off ...
Try to power on handset ...
Start loader from handset flash ...
Sending loader to handset RAM ...
Try to power on handset ...
Sending loader to handset RAM ...
Unpacking CPU file ...
Write CPU file: "W300_R9A035_GENERIC"
FAILURE: Code no 1961445

K750
 

Every K750 I tried I got this error:

Try to power on handset ...
Reading handset identificators ...
BOOT Signature: A1_DB2010_36_RED
CustomerID (flash): 36
FAILURE: Code no 1973182