MYX-2 Dead after flash, please help

[mahcin]

I just unlocked and flashed this old phone
unlock ok
flash:
choiced: write boot, write firmware, repair eeprom.

After that phone dead.
Trying repair with Direct write option, all going ok, but after still dead:

 Read Phone Info ...Done

  Found Phone, Phone Info: 
  - Phone Type    :myX-2
  - Phone IMEI    :35283200649xxxx
  - Board Type    :m62

  - NOR Flash ID    :0001 227E 220A 2201
  - Chip [0]    :AMD 29DL320G 32Mbit


  Write Flash Data ...Done!

  Write Flash Data ...Done!

  Write Flash Data ...Done!

  - New Firmware: JA3,EC: 050903 1811(22 00 00)

please help

I know is old phone, but I would like repair it

What is strange, all flashing is ok on battery, on external power supply cannot flash
so is software fault, or is just kind of a coincidence and hardware is broken?



Best Regards

[mahcin]

I just tested on couple more X2, SMTi is killing them if You tick option boot, firmware, eeprom

  Found Phone, Phone Info: 
  - Phone Type	:myX-2
  - Phone FW	:JA3,EB: 230703 1511
  - Phone HT	:22 00 00
  - Phone IMEI	:35181600475xxxx
  - Phone Code	:00000000 (inactive)
  - Prod.  Code	:251298797
  - Board Type	:m62

  - NOR Flash ID	:0001 227E 220A 2201
  - Chip [0]	:AMD 29DL320G 32Mbit

  Boot Method: "GP Device" Autodetect

  Operation Cost:
  - Clear/Set Net Code	:FREE
  - Change Firmware		:FREE

  P.S. GP Method Work Only USE "SMTi Virtual Port(COM0)"
       HS Method Clear User Code 1 Credit

flashed by direct with every file from support, cant repair, phones dead, and from this point You have to try repair on battery, cant flash on external power supply

[rybulek]

anyone know how to repair this phone