Tutorial : How to connect & use ET-BoX Plus with SpreadTrum CPU based handsets - GSM-Forum

nonu_don · 01-15-2011, 16:12

Easy instructions on "How to connect & use ET-BoX Plus & UCT Box with SpreadTrum CPU based handsets"

SpreadTrum CPU have different boot mode according to there CPU Type. Which is why it is important to select the correct boot mode for proper connectivity with the software. It might be posible that you can read info and flash with wrong selection, but for write flash need to select correct boot mode.

Correct Steps to connect and work on a SpreadTrum CPU based handset:

First u need to read information of the handset. Go to “SpreadTrum” tab, select “ReadInfo”, select option according to CPU type. If you don't know the CPU boot type then you can try “Auto-USB”, “Auto-COM” or “6600LNOR” one-by-one.
Press “Start”.
Now you don't need to power on the phone in SPD handsets. It will automatically start sensing the pinouts. After finding the pinouts the phone will ask for usb drivers. SPD drivers are located under folder “SpreadTrum_USB_Driver”. If you have already installed the drivers then system will not ask for drivers next time.
After installing drivers, software will connect to your SpreadTrum handset and will read information which will be displayed on the bottom.
You can now read in it that which type is the CPU and flash memory of the handset. Example: CPU: SC6600E-xxxx Flash: NAND_xxxx Here the CPU type is 6600E and the memory type in NAND, so in this case you need to select the option “6600M/E/I-NAND” and then proceed further.
After you have selected the correct CPU type in the options, now you can start with Format, Read Flash, Write Flash, Repair IMEI, etc.

for more guides, please download latest manual from here : http://forum.gsmhosting.com/vbb/f596...hindi-1016170/
You can download the video manual from here : http://www.uct.cc/temp/UCT_Box_Sprea...t_Tutorial.mp4

Br.
Naman

sanju expert · 01-21-2011, 16:33

good post sir ji........................

Momin_Telecom · 01-24-2011, 14:34

thanx Mr nanu don please give we all user et+box or et-box new update

chandan_123 · 01-24-2011, 18:50

Good job............

01-15-2011, 16:12	#1 (permalink)
nonu_don No Life Poster Join Date: Feb 2003 Location: ..::India::.. Age: 40 Posts: 3,809 Member: 22538 Status: Offline Sonork: 100.67180 Thanks Meter: 2,252	Tutorial : How to connect & use ET-BoX Plus with SpreadTrum CPU based handsets Easy instructions on "How to connect & use ET-BoX Plus & UCT Box with SpreadTrum CPU based handsets" SpreadTrum CPU have different boot mode according to there CPU Type. Which is why it is important to select the correct boot mode for proper connectivity with the software. It might be posible that you can read info and flash with wrong selection, but for write flash need to select correct boot mode. Correct Steps to connect and work on a SpreadTrum CPU based handset: First u need to read information of the handset. Go to “SpreadTrum” tab, select “ReadInfo”, select option according to CPU type. If you don't know the CPU boot type then you can try “Auto-USB”, “Auto-COM” or “6600LNOR” one-by-one. Press “Start”. Now you don't need to power on the phone in SPD handsets. It will automatically start sensing the pinouts. After finding the pinouts the phone will ask for usb drivers. SPD drivers are located under folder “SpreadTrum_USB_Driver”. If you have already installed the drivers then system will not ask for drivers next time. After installing drivers, software will connect to your SpreadTrum handset and will read information which will be displayed on the bottom. You can now read in it that which type is the CPU and flash memory of the handset. Example: CPU: SC6600E-xxxx Flash: NAND_xxxx Here the CPU type is 6600E and the memory type in NAND, so in this case you need to select the option “6600M/E/I-NAND” and then proceed further. After you have selected the correct CPU type in the options, now you can start with Format, Read Flash, Write Flash, Repair IMEI, etc. for more guides, please download latest manual from here : http://forum.gsmhosting.com/vbb/f596...hindi-1016170/ You can download the video manual from here : http://www.uct.cc/temp/UCT_Box_Sprea...t_Tutorial.mp4 Br. Naman

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
news headlines to gsm phone	mos	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	7	05-22-2016 11:42
How can I do a Welcome note for my 6110 a dosn't have any one ?	Viper	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	06-27-2015 11:57
How to add a language in 51xx/61xx	tati	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	05-21-2013 19:20
How to upload a new firmware...	Brand	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	06-08-2012 18:29
Help with 6110	paulomt1	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	05-25-2009 16:29

01-21-2011, 16:33	#2 (permalink)
sanju expert Junior Member Join Date: Mar 2010 Posts: 24 Member: 1252516 Status: Offline Thanks Meter: 4,294,967,280	good post sir ji........................

01-24-2011, 14:34	#3 (permalink)
Momin_Telecom No Life Poster Join Date: Dec 2010 Location: Gsm Hosting (INDIA) Posts: 2,945 Member: 1478271 Status: Online Sonork: 100.1608386 Thanks Meter: 1,806	thanx Mr nanu don please give we all user et+box or et-box new update

01-24-2011, 18:50	#4 (permalink)
chandan_123 No Life Poster Join Date: Jun 2008 Location: india Posts: 2,541 Member: 801212 Status: Offline Sonork: 100.1657902 Thanks Meter: 773	Good job............