Dead GD67 Please Help - GSM-Forum

fonetech · 02-20-2003, 22:18

I tried to unlock a GD67 today with CompleteGSM's free software ( exactly the same as spunlock version ), it seemed to flash ok but when I tried to unlock it , it said that it couldn't read imei and on the phones screen displayed an error and said somthing about bad checksum or something.

Now whenever you try and switch it on the screen just blinks

the software does work because I have unlocked 2 phones already, 3rd time unlucky

please help !!!!!

hadari · 02-20-2003, 22:32

HI
WHEN YOU TRIED TO UNLOCK GD 67 YOU SEE TEST MOD IN SCREEN

fonetech · 02-20-2003, 23:13

nope, I flashed phone and saw the screen state ERASING, then WRITING CODE, the COMPLETED, its when it trys to go into test mode that the error appears on the screen

Moro · 02-28-2003, 01:14

I have exatly the same problem-I tried to unlock the phone with spunlock sw and now it says SYSTEM ERROR bad chk sum,while flashing on half screen it was showing flash -mitsu I would suppose that it is a new flash chip which is nor supported and the phone needs to be flashed again with the same flash,if anybody has got a solution please let me know ,thanxx

XenKo78 · 02-28-2003, 21:38

yes new flash new versions, i have the solution to full repair it contact me

Fistro · 02-28-2003, 22:31

Hi

I have same problem with me Gd67

I flashed Ok with Gd67 v5.0c by SpUnlock
All Ok, but when click Unlock button soft respond "Read Imei error" and phone display this:

SYSTEM ERROR
60010006
L1A

SP HWT
EST:bad chk
SUM

How solution this problem ?

Please helpme

Thanks

KATOUE · 02-28-2003, 23:45

I have the same problem too ,

I wander if any one has a solution for that .

m.com · 03-01-2003, 08:05

XENKO - contact me on ICQ.

Fistro · 03-01-2003, 11:02

Hi
I am desperate, my phone this dead

Exist solution for this ?

New flash chip and new flash ?

Please help

02-20-2003, 22:18	#1 (permalink)
fonetech No Life Poster Join Date: Sep 2002 Posts: 898 Member: 15837 Status: Offline Thanks Meter: 2	Dead GD67 Please Help I tried to unlock a GD67 today with CompleteGSM's free software ( exactly the same as spunlock version ), it seemed to flash ok but when I tried to unlock it , it said that it couldn't read imei and on the phones screen displayed an error and said somthing about bad checksum or something. Now whenever you try and switch it on the screen just blinks the software does work because I have unlocked 2 phones already, 3rd time unlucky please help !!!!!

02-28-2003, 22:31	#6 (permalink)
Fistro Junior Member Join Date: Feb 2003 Age: 44 Posts: 3 Member: 23525 Status: Offline Thanks Meter: 0	I have same problem Hi I have same problem with me Gd67 I flashed Ok with Gd67 v5.0c by SpUnlock All Ok, but when click Unlock button soft respond "Read Imei error" and phone display this: SYSTEM ERROR 60010006 L1ASP HWT EST:bad chk SUM How solution this problem ? Please helpme Thanks

03-01-2003, 11:02	#9 (permalink)
Fistro Junior Member Join Date: Feb 2003 Age: 44 Posts: 3 Member: 23525 Status: Offline Thanks Meter: 0	Please a solution for this Hi I am desperate, my phone this dead Exist solution for this ? New flash chip and new flash ? Please help

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Dead GD67!!! Plz help!!!	Nokia man	Panasonic	0	03-06-2003 23:11
Dead B4, Please Help :((	gsmsoft	Alcatel & TCL Old Models	3	02-12-2002 21:44
dead 6210 - please HELP!!!!	Permonik	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	02-03-2002 21:50
DEAD S25!!! Please help	davix	x1x to x45/x50	5	05-18-2001 16:12
Dead T10s.. please help ! Thanks	Salute	Old Ericsson Phones & Sony Phones	1	11-02-2000 03:50

02-20-2003, 22:32	#2 (permalink)
hadari Freak Poster Join Date: Mar 2002 Location: morocco Age: 49 Posts: 333 Member: 10288 Status: Offline Thanks Meter: 16	HI WHEN YOU TRIED TO UNLOCK GD 67 YOU SEE TEST MOD IN SCREEN

02-20-2003, 23:13	#3 (permalink)
fonetech No Life Poster Join Date: Sep 2002 Posts: 898 Member: 15837 Status: Offline Thanks Meter: 2	nope, I flashed phone and saw the screen state ERASING, then WRITING CODE, the COMPLETED, its when it trys to go into test mode that the error appears on the screen

02-28-2003, 01:14	#4 (permalink)
Moro Junior Member Join Date: Mar 2002 Location: GB-BG Age: 47 Posts: 6 Member: 9953 Status: Offline Thanks Meter: 0	I have exatly the same problem-I tried to unlock the phone with spunlock sw and now it says SYSTEM ERROR bad chk sum,while flashing on half screen it was showing flash -mitsu I would suppose that it is a new flash chip which is nor supported and the phone needs to be flashed again with the same flash,if anybody has got a solution please let me know ,thanxx

02-28-2003, 21:38	#5 (permalink)
XenKo78 No Life Poster Join Date: Mar 2002 Location: Guadeloupe Age: 50 Posts: 531 Member: 9955 Status: Offline Thanks Meter: 7	yes new flash new versions, i have the solution to full repair it contact me

02-28-2003, 23:45	#7 (permalink)
KATOUE No Life Poster Join Date: Feb 2002 Location: UK Posts: 948 Member: 9732 Status: Offline Thanks Meter: 27	I have the same problem too , I wander if any one has a solution for that .

03-01-2003, 08:05	#8 (permalink)
m.com Freak Poster Join Date: Oct 2001 Location: Kiev, Ukraine Age: 46 Posts: 457 Member: 6852 Status: Offline Thanks Meter: 4	XENKO - contact me on ICQ.