GD90 dead - GSM-Forum

Inky · 12-18-2001, 22:24

I have a GD90 B14 which i have tried to downgrade it to B12... But with Ishida, it always stops during the flashing process (about 74%)... always at the same point. Then, i use perom, the soft by Aikon Team for flashing ATMEL chips... but this one says: "Error in Byte Program occured transfering sector address - 188000 H" It always shows that... and now, i don't know how to do now <img src="frown.gif" border="0"> Plz help <img src="wink.gif" border="0">

[ 20 December 2001 18:46: Message edited by: Inky ]

Inky · 12-19-2001, 23:45

Is there someone who can help me ? plz... <img src="wink.gif" border="0"> I have tried USPU too... but during the flashing process, the green light switch off by itself (about 85%...). The battery is fully charged of course... if someone have an idea...

pyroz · 12-20-2001, 00:58

try another PC or cable interface ... it must working, if not - probably HW problem

br <img src="cool.gif" border="0">

Inky · 12-20-2001, 01:18

The cable works 100%... i will try to change computer ! <img src="smile.gif" border="0"> Thx for this advice !

Inky · 12-20-2001, 09:53

I changed computer but it still stops... If someone can help me... <img src="frown.gif" border="0">

Inky · 12-20-2001, 18:47

I've done today two GD90 B14... and it works well... but with the dead one, i can't do anything... <img src="frown.gif" border="0"> The pflashing process still stops at the same point !! <img src="frown.gif" border="0"> Does someone have an idea plz ? i am being mad with this GD90 <img src="eek.gif" border="0">

BaNCo · 12-20-2001, 21:28

Hi Inky!

Use another phone and charge full battery (in another phone)!!!

And try flash ...

Need help - mail me!

B.r.

G$M solution · 12-20-2001, 23:35

HE HE

IF YOU MOVE BATERY YOUR PHONE IS TOTALY DEAD(YOU DON´T COMUNICATE WITH PHONE AFTER MOVING BATERY))

 ANY SOLUTION

BaNCo · 12-21-2001, 01:27

To follow me:

Read - ONLY full charge battery in another phone!

I haven this probs and repair phone! Full charge battery in another phone and flash dead phone - phone live and work fine!!!

B.r.

Inky · 12-21-2001, 09:35

I have fully charged the battery... but still have this pb. With Ishida, it always stops at 74% and after this, the green led blinks... is it normal ?

G$M solution · 12-22-2001, 21:24

to BaNCo

but not work 100 %

Read - ONLY full charge battery in another phone!

I haven this probs and repair phone! Full charge battery in another phone and flash dead phone - phone live and work fine!!!

 GSMsolution

12-18-2001, 22:24	#1 (permalink)
Inky Insane Poster Join Date: May 2000 Location: France Posts: 86 Member: 1418 Status: Offline Thanks Meter: 0	GD90 dead I have a GD90 B14 which i have tried to downgrade it to B12... But with Ishida, it always stops during the flashing process (about 74%)... always at the same point.<br />Then, i use perom, the soft by Aikon Team for flashing ATMEL chips... but this one says:<br />"Error in Byte Program occured<br /> transfering sector address - 188000 H"<br />It always shows that... and now, i don't know how to do now <img src="frown.gif" border="0"> <br />Plz help <img src="wink.gif" border="0"> <FONT COLOR="#ffff00" SIZE="1">[ 20 December 2001 18:46: Message edited by: Inky ]</font>

12-19-2001, 23:45	#2 (permalink)
Inky Insane Poster Join Date: May 2000 Location: France Posts: 86 Member: 1418 Status: Offline Thanks Meter: 0	Is there someone who can help me ? plz... <img src="wink.gif" border="0"> <br />I have tried USPU too... but during the flashing process, the green light switch off by itself (about 85%...). The battery is fully charged of course... if someone have an idea...

12-20-2001, 01:18	#4 (permalink)
Inky Insane Poster Join Date: May 2000 Location: France Posts: 86 Member: 1418 Status: Offline Thanks Meter: 0	The cable works 100%... i will try to change computer ! <img src="smile.gif" border="0"> <br />Thx for this advice !

12-20-2001, 23:35	#8 (permalink)
G$M solution Freak Poster Join Date: Nov 2001 Location: Zagreb, Croatia Age: 41 Posts: 454 Member: 7558 Status: Offline Sonork: 100.94170 Thanks Meter: 6	HE HE IF YOU MOVE BATERY YOUR PHONE IS TOTALY DEAD(YOU DON´T COMUNICATE WITH PHONE AFTER MOVING BATERY)) <br />ANY SOLUTION

12-21-2001, 09:35	#10 (permalink)
Inky Insane Poster Join Date: May 2000 Location: France Posts: 86 Member: 1418 Status: Offline Thanks Meter: 0	I have fully charged the battery... but still have this pb.<br />With Ishida, it always stops at 74% and after this, the green led blinks... is it normal ?

12-20-2001, 00:58	#3 (permalink)
pyroz No Life Poster Join Date: Dec 2001 Location: at home Age: 45 Posts: 572 Member: 7810 Status: Offline Thanks Meter: 4	try another PC or cable interface ... it must working, if not - probably HW problem br <img src="cool.gif" border="0">

12-20-2001, 09:53	#5 (permalink)
Inky Insane Poster Join Date: May 2000 Location: France Posts: 86 Member: 1418 Status: Offline Thanks Meter: 0	I changed computer but it still stops... If someone can help me... <img src="frown.gif" border="0">

12-20-2001, 18:47	#6 (permalink)
Inky Insane Poster Join Date: May 2000 Location: France Posts: 86 Member: 1418 Status: Offline Thanks Meter: 0	I've done today two GD90 B14... and it works well... but with the dead one, i can't do anything... <img src="frown.gif" border="0"> The pflashing process still stops at the same point !! <img src="frown.gif" border="0"> Does someone have an idea plz ? i am being mad with this GD90 <img src="eek.gif" border="0">

12-20-2001, 21:28	#7 (permalink)
BaNCo Freak Poster Join Date: Mar 2001 Location: RuSSia Age: 53 Posts: 381 Member: 3747 Status: Offline Thanks Meter: 0	Hi Inky! Use another phone and charge full battery (in another phone)!!! And try flash ... Need help - mail me! B.r.

12-21-2001, 01:27	#9 (permalink)
BaNCo Freak Poster Join Date: Mar 2001 Location: RuSSia Age: 53 Posts: 381 Member: 3747 Status: Offline Thanks Meter: 0	To follow me: Read - ONLY full charge battery in another phone! I haven this probs and repair phone! Full charge battery in another phone and flash dead phone - phone live and work fine!!! B.r.

12-22-2001, 21:24	#11 (permalink)
G$M solution Freak Poster Join Date: Nov 2001 Location: Zagreb, Croatia Age: 41 Posts: 454 Member: 7558 Status: Offline Sonork: 100.94170 Thanks Meter: 6	to BaNCo but not work 100 % Read - ONLY full charge battery in another phone! I haven this probs and repair phone! Full charge battery in another phone and flash dead phone - phone live and work fine!!! <br />GSMsolution

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
GD90 Dead, Need Help	DrMobile	Panasonic	4	02-17-2017 14:24
gd90 dead ???	nels	Panasonic	16	06-11-2002 00:59
gd90 dead after unlock	Tigra	Panasonic	2	06-09-2002 08:15
Repair GD90 dead!!!!	Pandemonio100	Panasonic	3	08-13-2001 23:57
help GD90 DEAD	LORD_SHAH	Panasonic	7	05-24-2001 14:29