gd87 with erased boot - GSM-Forum

gsmrazvan · 10-11-2003, 07:27

i tri to flash gd 87 butt the batery was not full
so the boot was erased
the phone dosend conect to winmodo
solutions?

NSerN · 10-11-2003, 10:17

As for other dead Panasonic :
solution for phone with BGA or no BGA chip

you need :

- 1 dead phone and 1 worked phone
- hot air station and soldering station
- PC with cable
- software use WinMoDo with language pack

Steps :

- desolder from bad phone flash chip
- desolder from good phone flash chip
- solder in BAD phone works flash chip
- connect good phone with cable to PC
- run WinMoDo with GANG mode
- starting upload
- when you see in LCD : Flash loader - disconnect cable from phone
- in display you see Flash loader and phone frezee
- phone in FLASHING MODE !!!!
- YOU NEED DESOLDERING FLASH CHIP FROM WORKED,
POWERED AND FREEZED in flash mode PHONE !!!!!!!!
CAREFULY !!!!!!!!!!!!!
- DESOLDERING GOOD FLASH CHIP from BAD phone (phone still avaible in flash mode)
- SOLDER BAD FLASH CHIP in BAD PHONE
- PHONE STILL in FLASH MODE
- connect phone with cable to computer
- press OK
- you see uploading process - erasing 7-10 minute and flashing

tito2002 · 10-11-2003, 13:13

I think there is someone that can make this for you Razvan.............

10-11-2003, 07:27	#1 (permalink)
gsmrazvan No Life Poster Join Date: Apr 2003 Location: ROMANIA Age: 45 Posts: 761 Member: 26714 Status: Offline Thanks Meter: 14	gd87 with erased boot i tri to flash gd 87 butt the batery was not full so the boot was erased the phone dosend conect to winmodo solutions?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
help to revive gd87 with boot erased	chitawira	Panasonic	1	03-29-2006 18:09
Repair Dead Motorla phones with erased boot @ Infinity Box	Infinity-Box	Main Sales Section	0	01-15-2006 14:54
I need repair Gd 87 with erase boot sector in poland.	Nestor7	Panasonic	0	05-04-2004 15:58
GD67 with erased boot area ???	blinet	Panasonic	14	03-07-2004 00:57
Any idea how flash gd 93 with erased boot???	gsmonline	Panasonic	0	10-07-2001 20:43

10-11-2003, 10:17	#2 (permalink)
NSerN No Life Poster Join Date: Jan 2002 Location: Russia Posts: 704 Member: 8599 Status: Offline Thanks Meter: 3	As for other dead Panasonic : solution for phone with BGA or no BGA chip you need : - 1 dead phone and 1 worked phone - hot air station and soldering station - PC with cable - software use WinMoDo with language pack Steps : - desolder from bad phone flash chip - desolder from good phone flash chip - solder in BAD phone works flash chip - connect good phone with cable to PC - run WinMoDo with GANG mode - starting upload - when you see in LCD : Flash loader - disconnect cable from phone - in display you see Flash loader and phone frezee - phone in FLASHING MODE !!!! - YOU NEED DESOLDERING FLASH CHIP FROM WORKED, POWERED AND FREEZED in flash mode PHONE !!!!!!!! CAREFULY !!!!!!!!!!!!! - DESOLDERING GOOD FLASH CHIP from BAD phone (phone still avaible in flash mode) - SOLDER BAD FLASH CHIP in BAD PHONE - PHONE STILL in FLASH MODE - connect phone with cable to computer - press OK - you see uploading process - erasing 7-10 minute and flashing

10-11-2003, 13:13	#3 (permalink)
tito2002 Freak Poster Join Date: Sep 2002 Location: Romania Age: 47 Posts: 266 Member: 15184 Status: Offline Thanks Meter: 4	I think there is someone that can make this for you Razvan.............