Gd90 (bxx) dead please help!!!!!!!! - GSM-Forum

gsmflash · 06-18-2000, 03:31

please help ,i've gd90 (B14) dead after flashing with Perom 2.0 . With soft emei 0.07 and flash request by virtual any solution !!

X-Shadow · 06-18-2000, 15:22

Hello,

Flash phone again with B12. Use VirtualM
Flash Request + Windows Flasher 1.0c + Then
load IMEI via Unlocker version 0.7 (dos
unlocker) + Then unlock using VirtualM
Win Software + Lastly, fix using GD90rep.exe

As much as possible, follow these steps.
Use different soft if you want.

Email me if you still have problems.

[email protected]

Best Regards,
X-Shadow

misel · 06-18-2000, 19:50

after flashing with perom 20 my GD90 was death ,,, solution when flashing is finished pres escape and go to option 7 in perom to recaluculate checksum after this option is finished press 8 ,to end perom 20 ,,, green leed is off now, and your phone will restart and power on ,,,

))))
regards

while flashing green led must be ON

06-18-2000, 03:31	#1 (permalink)
gsmflash Junior Member Join Date: Jun 2000 Posts: 17 Member: 1583 Status: Offline Thanks Meter: 4	Gd90 (bxx) dead please help!!!!!!!! please help ,i've gd90 (B14) dead after flashing with Perom 2.0 . With soft emei 0.07 and flash request by virtual any solution !!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
please i have anycool after flash dead please help	masad	Infinity-Box	18	10-26-2007 21:49
Dead BF3 103 KJ155000. Flash new Sw but still dead please help!!	AnToS	BF, BG, TH, BHx Series	7	04-17-2003 07:55
I want to know flashing method panasonic GD90 any body please help me	tiktik	Panasonic	2	01-16-2003 01:51
alcatel be4 dead...please help...	sidharthaharish	Alcatel & TCL Old Models	6	02-20-2002 21:32
T1018s is dead please help me	keesie	Old Ericsson Phones & Sony Phones	8	06-01-2000 02:34

06-18-2000, 15:22	#2 (permalink)
X-Shadow No Life Poster Join Date: Jan 2000 Location: GSM Forum Posts: 1,108 Member: 871 Status: Offline Thanks Meter: 602	Hello, Flash phone again with B12. Use VirtualM Flash Request + Windows Flasher 1.0c + Then load IMEI via Unlocker version 0.7 (dos unlocker) + Then unlock using VirtualM Win Software + Lastly, fix using GD90rep.exe As much as possible, follow these steps. Use different soft if you want. Email me if you still have problems. [email protected] Best Regards, X-Shadow

06-18-2000, 19:50	#3 (permalink)
misel No Life Poster Join Date: Apr 2000 Location: near you Age: 60 Posts: 560 Member: 1196 Status: Offline Thanks Meter: 6	after flashing with perom 20 my GD90 was death ,,, solution when flashing is finished pres escape and go to option 7 in perom to recaluculate checksum after this option is finished press 8 ,to end perom 20 ,,, green leed is off now, and your phone will restart and power on ,,, )))) regards while flashing green led must be ON