PANA GD87 BOOT ERASED Still DEAD - GSM-Forum

eddi® · 06-15-2004, 10:21

PANA GD87 BOOT ERASED Still DEAD HOW to REPAIR GD87 without Jtag its passible or NOT.

hitibiti · 06-15-2004, 10:34

the only solution is jtag

50-pounds · 06-15-2004, 10:57

there has been some post's saying you can fix it using a good working gd87 after it get's past the boot section on winmodo disconnect phone and put in dead phone i havent tryed this yet as im still waiting for a good working phone hope it works like as i need to fix a gd87 boot

50!

Blartiartfast · 06-15-2004, 11:40

50-pounds
What you need to do (gulp) is have a working gd87 remove the flash ic from the dead phone. Put the working phone into boot mode, remove the flash ic from the good phone, and then put the dead phones flash ic in its place. If all has gone well, the phone should reflash, and work correctly.

electrohicham · 06-15-2004, 12:34

Quote:

Originally Posted by Blartiartfast

50-pounds
What you need to do (gulp) is have a working gd87 remove the flash ic from the dead phone. Put the working phone into boot mode, remove the flash ic from the good phone, and then put the dead phones flash ic in its place. If all has gone well, the phone should reflash, and work correctly.

you are genius easy ,fast and safe solution! anny one have jtag schematic and solution and can explain haw to do it plz?

Blartiartfast · 06-15-2004, 13:17

Far from it actually. That applies to the genius, and the fast and safe bits.
But thankyou anyway.
The cheaper jtag programmers are under a £1000 now

50-pounds · 06-15-2004, 22:24

Quote:

Originally Posted by Blartiartfast

50-pounds
What you need to do (gulp) is have a working gd87 remove the flash ic from the dead phone. Put the working phone into boot mode, remove the flash ic from the good phone, and then put the dead phones flash ic in its place. If all has gone well, the phone should reflash, and work correctly.

haha sounds easy but one problem whats this Flash Ic Look like and do i need to soilder anything??

any step by step guides out there on how to do this would be good

cheers mate
50!

dhruva · 07-11-2004, 16:02

here is a thing i had some messages in my mobile (sms) one time when i flashed all the message was gone (or so did i thought) but when i checked today on review on sms option it still says (31/200) which obviously means there are still those messages somewhere in mobile..in my sim there are only 3 messages so mind telling how can i make those message appear again.. or where is it.. it hapened something when i did with cb2000 i used one ctc file after that it was gone.... the phone works perfect just wanna know if i can recover those messages or delete those msges.. cleaning memory dont work i think i tried that ..

50-pounds · 07-11-2004, 17:55

try a higher firmware matey

dhruva · 07-11-2004, 20:01

i have a55 firmware is there any newer firmware than that?? i dont know.. if there is would someone provide me the link.. oh and the firmware i am useing is not original its customised..a55xp.... any other suggestion...

dhruva · 08-11-2004, 09:46

my default mms download size is 50 does anyone knows how to increase and make it lets say 100 or 150.. i tried with cb2000 1.5 didnt worked out it was uneditable.. anyone.. ctc writer or any other techinque.. thanks in advance

06-15-2004, 10:21	#1 (permalink)
eddi® No Life Poster Join Date: Apr 2002 Location: Germany Age: 52 Posts: 768 Member: 10776 Status: Offline Thanks Meter: 240	PANA GD87 BOOT ERASED Still DEAD PANA GD87 BOOT ERASED Still DEAD HOW to REPAIR GD87 without Jtag its passible or NOT.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
gd87, why it still dead!	.:bono:.	Panasonic	0	10-06-2006 04:00
help to revive gd87 with boot erased	chitawira	Panasonic	1	03-29-2006 18:09
Panasonic GD87 BOOT erased, INFO	sixkiller666	Panasonic	28	03-22-2004 13:49
gd87 with erased boot	gsmrazvan	Panasonic	2	10-11-2003 13:13

06-15-2004, 10:34	#2 (permalink)
hitibiti No Life Poster Join Date: Mar 2003 Location: Canada Age: 44 Posts: 8,146 Member: 24023 Status: Offline Sonork: 100.61317 Thanks Meter: 2,630	the only solution is jtag

06-15-2004, 10:57	#3 (permalink)
50-pounds No Life Poster Join Date: Jan 2004 Location: England Posts: 602 Member: 48042 Status: Offline Thanks Meter: 1	there has been some post's saying you can fix it using a good working gd87 after it get's past the boot section on winmodo disconnect phone and put in dead phone i havent tryed this yet as im still waiting for a good working phone hope it works like as i need to fix a gd87 boot 50!

06-15-2004, 11:40	#4 (permalink)
Blartiartfast No Life Poster Join Date: May 2001 Location: U.K Age: 53 Posts: 1,425 Member: 4611 Status: Offline Thanks Meter: 68	50-pounds What you need to do (gulp) is have a working gd87 remove the flash ic from the dead phone. Put the working phone into boot mode, remove the flash ic from the good phone, and then put the dead phones flash ic in its place. If all has gone well, the phone should reflash, and work correctly.

06-15-2004, 13:17	#6 (permalink)
Blartiartfast No Life Poster Join Date: May 2001 Location: U.K Age: 53 Posts: 1,425 Member: 4611 Status: Offline Thanks Meter: 68	Far from it actually. That applies to the genius, and the fast and safe bits. But thankyou anyway. The cheaper jtag programmers are under a £1000 now

07-11-2004, 16:02	#8 (permalink)
dhruva Freak Poster Join Date: Oct 2003 Location: SWEDEN Age: 44 Posts: 346 Member: 41306 Status: Offline Thanks Meter: 0	here is a thing i had some messages in my mobile (sms) one time when i flashed all the message was gone (or so did i thought) but when i checked today on review on sms option it still says (31/200) which obviously means there are still those messages somewhere in mobile..in my sim there are only 3 messages so mind telling how can i make those message appear again.. or where is it.. it hapened something when i did with cb2000 i used one ctc file after that it was gone.... the phone works perfect just wanna know if i can recover those messages or delete those msges.. cleaning memory dont work i think i tried that ..

07-11-2004, 17:55	#9 (permalink)
50-pounds No Life Poster Join Date: Jan 2004 Location: England Posts: 602 Member: 48042 Status: Offline Thanks Meter: 1	try a higher firmware matey

07-11-2004, 20:01	#10 (permalink)
dhruva Freak Poster Join Date: Oct 2003 Location: SWEDEN Age: 44 Posts: 346 Member: 41306 Status: Offline Thanks Meter: 0	i have a55 firmware is there any newer firmware than that?? i dont know.. if there is would someone provide me the link.. oh and the firmware i am useing is not original its customised..a55xp.... any other suggestion...

08-11-2004, 09:46	#11 (permalink)
dhruva Freak Poster Join Date: Oct 2003 Location: SWEDEN Age: 44 Posts: 346 Member: 41306 Status: Offline Thanks Meter: 0	my default mms download size is 50 does anyone knows how to increase and make it lets say 100 or 150.. i tried with cb2000 1.5 didnt worked out it was uneditable.. anyone.. ctc writer or any other techinque.. thanks in advance