Panasonic A100 Display Problem - GSM-Forum

gsmsikar · 09-17-2004, 09:01

in a Panasonic A100 there is no display but the set is working well , it can dial any number and receive any call etc.
but when i switch ON the set it displays the "PANASONIC" on the LCD for a second , so the display could not be faulty...//
this problem occured after being dropped by hand .
i have opened the set and tried to find any PCB break but didnt find any..

please help///

thanks

abbeydguru · 09-18-2004, 11:43

check the elastomer for any dent..or u may probably make a lope on the connector to the LCD.

gsmsikar · 09-18-2004, 22:01

i have tried that ,
can that be a software problem?

abbeydguru · 09-20-2004, 10:37

if that is the case try sorting it with software.

gsmsikar · 09-20-2004, 19:55

hi
can u tell me which software and how to use the software?
please help me..

thanks

Moosani · 09-21-2004, 21:54

please do this step

1)remove internal cell for 1 mintute and put it back
check mobile may be work perfect if no then

2)flash

best regards

Bulba · 09-21-2004, 22:32

Only reflash with good flash and all will be OK.

sm0lly · 08-31-2005, 06:00

Men. There is LCD with yellow flat cable in my Panasonic A100. And when I try to use three LCDs with greeb flat cable, my phone don't work correctly: LCD sometimes work (when the contact with board not good) and sometimes don't work...

The phone was made in CHINA...

Is any solution? Many, many thanks.

09-17-2004, 09:01	#1 (permalink)
gsmsikar No Life Poster Join Date: May 2003 Posts: 5,667 Member: 28004 Status: Offline Sonork: 100.1601142 Thanks Meter: 770	Panasonic A100 Display Problem in a Panasonic A100 there is no display but the set is working well , it can dial any number and receive any call etc. but when i switch ON the set it displays the "PANASONIC" on the LCD for a second , so the display could not be faulty...// this problem occured after being dropped by hand . i have opened the set and tried to find any PCB break but didnt find any.. please help/// thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Panasonic A100 hv problem to UNLOCK - URGENT	khem	Infinity-Box	9	06-17-2008 17:41
panasonic A100 Mic problem	hooi76	Hardware Repair by brands	1	02-15-2007 15:51
Panasonic A100 problems	mrmarcellos	Panasonic	17	03-15-2005 11:26
Samsung A100 display problems!	OncleOh	Samsung Hardware Repair	4	03-05-2005 19:53
Panasonic A100/g50 flashing problem	Moosani	Panasonic	8	10-07-2004 07:00

09-18-2004, 11:43	#2 (permalink)
abbeydguru Cheater -Don't Deal with him- Join Date: Mar 2003 Location: ITALY Posts: 1,124 Member: 23994 Status: Offline Thanks Meter: 43	check the elastomer for any dent..or u may probably make a lope on the connector to the LCD.

09-18-2004, 22:01	#3 (permalink)
gsmsikar No Life Poster Join Date: May 2003 Posts: 5,667 Member: 28004 Status: Offline Sonork: 100.1601142 Thanks Meter: 770	i have tried that , can that be a software problem?

09-20-2004, 10:37	#4 (permalink)
abbeydguru Cheater -Don't Deal with him- Join Date: Mar 2003 Location: ITALY Posts: 1,124 Member: 23994 Status: Offline Thanks Meter: 43	if that is the case try sorting it with software.

09-20-2004, 19:55	#5 (permalink)
gsmsikar No Life Poster Join Date: May 2003 Posts: 5,667 Member: 28004 Status: Offline Sonork: 100.1601142 Thanks Meter: 770	hi can u tell me which software and how to use the software? please help me.. thanks

09-21-2004, 21:54	#6 (permalink)
Moosani Registered User Join Date: Sep 2002 Posts: 1,321 Member: 15866 Status: Offline Thanks Meter: 192	please do this step 1)remove internal cell for 1 mintute and put it back check mobile may be work perfect if no then 2)flash best regards

09-21-2004, 22:32	#7 (permalink)
Bulba No Life Poster Join Date: Aug 2002 Location: Minsk,Belarus Age: 55 Posts: 555 Member: 14591 Status: Offline Thanks Meter: 4	Only reflash with good flash and all will be OK.

08-31-2005, 06:00	#8 (permalink)
sm0lly Freak Poster Join Date: Feb 2003 Location: Belarus, Minsk Age: 47 Posts: 191 Member: 23255 Status: Offline Thanks Meter: 5	Men. There is LCD with yellow flat cable in my Panasonic A100. And when I try to use three LCDs with greeb flat cable, my phone don't work correctly: LCD sometimes work (when the contact with board not good) and sometimes don't work... The phone was made in CHINA... Is any solution? Many, many thanks.