PadFinder box - new smart universal box for automatic pinout search!

[GSMtricks]

Meet PadFinder - absolutely the best solution for all problems with pinout detection!
PadFinder - the universal device, which automatically finds pinout for your cell phone. This device contains a number of unique functions and will allow you to work with a huge range of cell phones.

DISTINGUISHING FEATURES:
- Automatic selection of the desired pinout for your Chinese phones just by pressing a button on the box!
- PadFinder is fully compatible with other boxes! That means that you will be able to use it not only for searching the pinouts, but also for compatibility cables.
- The box management procedure is simple and easy understandable. Full control of all the box capabilities is performed with just one button. Now you do not need to spend time to assimilate new device!
- Signals manaul control option with multiple clicks, which is very usefull in case if you know the correct pinout on the phone with a new processor. You can point in the right place and RX / TX pins in two clicks!
- Managing the box manually provides you the unique opportunity to exclude the unnecessary pins! This is very important when dealing with 2-processors Phones, because a lot of problems arise for finding the second pinout.
- The unique opportunity to save the already found and checked pinouts. Having found the necessary pinout for your phone, you can save it and the next time you can choose from the saved models list the one you need - the box will automatically make the cable settings for you. Simply, conveniently and comfortably!
- Possibility to use PadFinder as Clip for pinouts autodetection in ALL MTK CPU phones is a distinguishing peculiarity of our box and marks it out among the same kind of devices! You get the ONE BUTTON SOLUTION for ALL MTK-based phones ( handsets besed on other processor types are under permanent development now and will be added in further updates )! need to start any service programs, choose cables and make settings for pinout autodetection - pinouts are found at once and you get to work right away.

With PadFinder you will have the work done while your competitors are just preparing!

An automatic pinout search ( extremely convenient and usefull for chinese phones ), saving the found pinout with the simple ini files system, possibility of box manual management with our programm - allows you to set manually the appropriate pinouts you know, excluding the unnecessary when searching the pinouts for the second CPU ( for chinese phones ), full compatibility with other boxes, which allows you to connect their cables to PadFinder box.
Initial support for several CPU types for an automatic search ( other CPU types will be added with the next updates ):
- MTK 62xx ( all MTK include 6228, 6229 etc )
- AD 6522 / AD 6525
- TI sample A ( VK3xx etc )
- TI sample B ( boot in ROM )
- TI sample B ( boot in Flash Rom )
- SkyWorks CX805
- Philips OM6357 ( bootstrap )
- Philips ( tat mode )
ATTENTION: Other processor types, which are absent in the list at the moment, will be added with further updates! But knowing the pinout, you can allways make the cable setting manually for any CPU type, even if it is not in the list.

What do you get having bought this device:

- PadFinder box
- Cables set ( 22 pcs )
- USB cable
- RG45 Multi-box cable
- DB26 -> RG45 coverter cable
- 1 year free support and update
- Box configuration and management program



For more info, please, spend some time and explore our official web-site: www.padfinder.net

More info: https://forum.gsmhosting.com/vbb/f463/important-what-padfinder-box-516870/
New support section: https://forum.gsmhosting.com/vbb/f463/

[malpinssa]

good product.but we prefer somthing wich working with MULTI BOX.
now its neaser to by another box

[GSMtricks]

Originally Posted by malpinssa

good product.but we prefer somthing wich working with MULTI BOX.
now its neaser to by another box

But that is why we do this box. It is working with Multi-box and with Multi-box LITE without any problem and without activations! You just need to connect padfinder box info "special socket" in you Multi-box and use! Is easy!

[gambitjam]

Does it use any other box apart from Multi-box?

[Multi-box TEAM]

Originally Posted by gambitjam

Does it use any other box apart from Multi-box?

PadFinder is fully compatible with other boxes. The box can work as an absolutely stand-alone device. It means that working with other boxes you can connect PadFinder on USB and get in system a universal comport. You can use PadFinder to find the pinout for almost ANY cell phone ( Maxon, Philips, LG, Chinese phones and so on ) or set it manually if you already know the pinout in the phone ( for example, you know the correct pinout on the phone with a new processor ) you can point in the right place and RX / TX pins in two clicks! All you need is just to connect the phone to PadFinder, find the necessary pinout automatically ( using our program ) or manually ( in case if the automatic search is not supported for that CPU type ). After starting the program of other developers ( infinity box, et-box, furios, thunderstorm etc. ) you need to choose the comport with the connected PadFinder on it and start working.

In addition, PadFinder is compatible with the number of the most popular RJ45 cables: Unibox, Multi-box, UFS, JAF, Infinity-box, Griffin, Thunderstorm, Furious-box, SPT-box and other RJ45 cables with compatible Gnd/Vpp pins!


You can also use PadFinder not only for searching the pinouts, but also for compatibility cables. With a cable that works with one box, but does not work with the other - you can completely customize it to your needs in only couple of clicks!

PadFinder is a really Universal cable-box - can work with all brands!

After you have successfully found the pinout, you just run the appropriate soft of any other developer that you have ( Infinity, JAF, Thunderstorm, ET-box, Furious ) and start working!

IMPORTANT: NO NEED FOR ANY EXTRA ACTIVATIONS to work with other boxes!


PROCEDURE OF PadFinder's WORK WITH INFINITY-BOX



1. Connect PadFinder to PC via an ordinary AB USB cable
2. Connect the DB26 cable to PadFinder ( "Special" socket ) and to the phone.
3. Find the pinout using PadFinder ( see the manual ) OR use the CLIP function ( see the manual ) to save your time and for more convenience if the phone is MTK-based!
4. Connect Infinity-box via an ordinary AB USB cable
5. Start the appropriate soft of Infinity ( for example, Chinese Miracle )
6. In the Device Manager find the appropriate PadFinder USB Serial Port among the Ports ( COM & LPT ) - in our example it is PadFinder USB Serial Port ( COM3 )



7. Enter the "Settings" bookmark in "Chinese Miracle" and choose the found PadFinder USB Serial Port ( COM3 )



8. In "Chinese Miracle" enter the "Service" bookmark and press "Read detailed information" button.





9. The soft will read all the info from the phone! See the log below:

Quote:
COM3 [VCP0] selected
Quote:
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read/check detailed information
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
chip: 0031:94C1:23CA
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 89880F00010001:89880F00000000
flash: Intel Intel/Sharp ext [def 0004x008000 007Fx020000] 16Mb
detecting chip #01 in region #00...
flash: 89880F00010001:89880F00000000
flash: Intel Intel/Sharp ext [def 0004x008000 007Fx020000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
115200
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 89880F00010001:89880F00000000
flash: Intel Intel/Sharp ext [def 0004x008000 007Fx020000] 16Mb
detecting chip #01 in region #00...
flash: 89880F00010001:89880F00000000
flash: Intel Intel/Sharp ext [def 0004x008000 007Fx020000] 16Mb
it's time to stop: 2A0000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 Ok
security area backup saved: id.81F69382.[MY6226_PCB01_GPRS_MT6226_S01.DM200_V008_1_WIN_WISR TON.BIN_FB4228FD].rpl
New firmware detected:
MY6226_PCB01_GPRS_MT6226_S01.DM200_V008_1_WIN_WISR TON.BIN
- make "Repair security area" operation
- send "backup_system_log_..." file to support
- make "Read full flash" operation
- send flash backup file(s) to support
- include in your e-mail full text from phone back label (phone name etc.)
identification#1 detection finished
device-id: 81F69382
identification#1 protocol ver: 04
ver. sw1: MY6226_PCB01_GPRS_MT6226_S01.DM200_V008_1_WIN_WISR TON.BIN
ver. sw2: DM200.V008.1.WIN.WISRTON
ffs offset/size: 00F00000/00100000
detect device identification#2...
detection phase #1...
.
warning: optional information not found
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00F00000
flash: 89880F00010001:89880F00000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00F00000
detecting eeprom/ffs size...
eeprom/ffs size: 00100000
ffs chip: 00
eeprom/ffs area: 00000000:00F00000-00FFFFFF
detecting ffs structure pass 1...
detect standard fat location pass #1...
.................................................. ..........
detect extended fat location pass #1...
detect standard fat offset pass #1...
detect standard fat data...
fat layout detection complete
ffs element #1 detected ok
file saved: backup_system_log_81F69382_MY6226_PCB01_GPRS_MT622 6_S01.DM200_V008_1_WIN_WISRTON.BIN_FB4228FD_200803 28-133745.B0X.bin
Finished, time used: 312 sec
Remove/Install battery now ![/quote]
PadFinder - works with all other boxes and softwares!