5200 Sec xxxx ATD ver 4.71 or 5.00 no unlock - GSM-Forum

migsacho · 10-17-2007, 13:38

Ver 4.71 BB5Box 2.5 no unlock
Searching for phone ...
Phone found on FBUS interface
Reading phone info ...
Type: RM-174
Version: V_04.72_26-03-07_RM-174_(c)_Nokia.
IMEI: 356439014482277
SP LOCK status:
Config Key: 7300200000000000
Block 1: CLOSED Type 5 Data: 73002F
Block 2: CLOSED Type 5 Data: 21407F
Block 3: CLOSED Type 5 Data: 72207F
Block 4: CLOSED Type 5 Data: 74807F
Block 5: CLOSED Type 5 Data: 33403F
Block 6: CLOSED Type 5 Data: 732123
Block 7: CLOSED Type 5 Data: 74000F
Block 8: CLOSED Type 5 Data: 73002F
Block 9: CLOSED Type 5 Data: 21407F
Block 10: CLOSED Type 5 Data: 72207F
Block 11: CLOSED Type 5 Data: 74807F
Block 12: CLOSED Type 5 Data: 33403F
Block 13: CLOSED Type 5 Data: 732123
Block 14: CLOSED Type 5 Data: 74000F
Keyboard wrong codes counter: 0 wrong tries from max. 3 tries
Cable wrong codes counter: 0 wrong tries from max. 10 tries
Set Full Factory Defaults ...
Reset phone ...
Reset phone in TEST mode ...
Full Factory Defaults set OK
Create autobackup of PM 308
Reading PM Field 308 Subfield 1 with length 8192 bytes
Saving autobackup to file: RM-174_356439014482277_Locked_Keycnt_0_Fbuscnt_0__V_0 4.72_26-03-07_RM-174_(c)_Nokia..bin
Auto Write PM 308 procedure started
Searching for backup file with lowest FBUS count ...
Finded backup file: RM-174_356439014482277_Locked_Keycnt_0_Fbuscnt_0__V_0 4.72_26-03-07_RM-174_(c)_Nokia..bin
Writting PM Field 308 Subfield 1 with length 8192 bytes
Reset phone ...
PM Field 308 Subfield 1 written OK
Reading SP Locks after Auto Write PM 308 ...
SP LOCK status:
Config Key: 7300200000000000
Block 1: CLOSED Type 5 Data: 73002F
Block 2: CLOSED Type 5 Data: 21407F
Block 3: CLOSED Type 5 Data: 72207F
Block 4: CLOSED Type 5 Data: 74807F
Block 5: CLOSED Type 5 Data: 33403F
Block 6: CLOSED Type 5 Data: 732123
Block 7: CLOSED Type 5 Data: 74000F
Block 8: CLOSED Type 5 Data: 73002F
Block 9: CLOSED Type 5 Data: 21407F
Block 10: CLOSED Type 5 Data: 72207F
Block 11: CLOSED Type 5 Data: 74807F
Block 12: CLOSED Type 5 Data: 33403F
Block 13: CLOSED Type 5 Data: 732123
Block 14: CLOSED Type 5 Data: 74000F
Keyboard wrong codes counter: 0 wrong tries from max. 3 tries
Cable wrong codes counter: 0 wrong tries from max. 10 tries
Reset phone in TEST mode ...
Checking if model/version is supported for unlock ...
ERROR: Not suported model/version
__________________________________________________ ______________

Ver 5.00 BB5BOX 2.5
Searching for phone ...
Phone found on FBUS interface
Reading phone info ...
Type: RM-174
Version: V_05.00_27-04-07_RM-174_(c)_Nokia.
IMEI: 356439014482277
SP LOCK status:
Config Key: 7300200000000000
Block 1: CLOSED Type 5 Data: 73002F
Block 2: CLOSED Type 5 Data: 21407F
Block 3: CLOSED Type 5 Data: 72207F
Block 4: CLOSED Type 5 Data: 74807F
Block 5: CLOSED Type 5 Data: 33403F
Block 6: CLOSED Type 5 Data: 732123
Block 7: CLOSED Type 5 Data: 74000F
Block 8: CLOSED Type 5 Data: 73002F
Block 9: CLOSED Type 5 Data: 21407F
Block 10: CLOSED Type 5 Data: 72207F
Block 11: CLOSED Type 5 Data: 74807F
Block 12: CLOSED Type 5 Data: 33403F
Block 13: CLOSED Type 5 Data: 732123
Block 14: CLOSED Type 5 Data: 74000F
Keyboard wrong codes counter: 0 wrong tries from max. 3 tries
Cable wrong codes counter: 0 wrong tries from max. 10 tries
Set Full Factory Defaults ...
Reset phone ...
Reset phone in TEST mode ...
Full Factory Defaults set OK
Create autobackup of PM 308
Reading PM Field 308 Subfield 1 with length 8192 bytes
Saving autobackup to file: RM-174_356439014482277_Locked_Keycnt_0_Fbuscnt_0__V_0 5.00_27-04-07_RM-174_(c)_Nokia..bin
Auto Write PM 308 procedure started
Searching for backup file with lowest FBUS count ...
Finded backup file: RM-174_356439014482277_Locked_Keycnt_0_Fbuscnt_0__V_0 5.00_27-04-07_RM-174_(c)_Nokia..bin
Writting PM Field 308 Subfield 1 with length 8192 bytes
Reset phone ...
PM Field 308 Subfield 1 written OK
Reading SP Locks after Auto Write PM 308 ...
SP LOCK status:
Config Key: 7300200000000000
Block 1: CLOSED Type 5 Data: 73002F
Block 2: CLOSED Type 5 Data: 21407F
Block 3: CLOSED Type 5 Data: 72207F
Block 4: CLOSED Type 5 Data: 74807F
Block 5: CLOSED Type 5 Data: 33403F
Block 6: CLOSED Type 5 Data: 732123
Block 7: CLOSED Type 5 Data: 74000F
Block 8: CLOSED Type 5 Data: 73002F
Block 9: CLOSED Type 5 Data: 21407F
Block 10: CLOSED Type 5 Data: 72207F
Block 11: CLOSED Type 5 Data: 74807F
Block 12: CLOSED Type 5 Data: 33403F
Block 13: CLOSED Type 5 Data: 732123
Block 14: CLOSED Type 5 Data: 74000F
Keyboard wrong codes counter: 0 wrong tries from max. 3 tries
Cable wrong codes counter: 0 wrong tries from max. 10 tries
Reset phone in TEST mode ...
Checking if model/version is supported for unlock ...
Please connect testpoints
Testpoints connected OK
Keep Testpoints connected until unlock finish!
Unlocking phone ...
Try number: 1
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 2
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 3
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 4
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 5
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 6
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 7
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 8
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 9
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 10
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Unlock fail. Please try again.

Please solve the problem !
Thanks

Raskal · 10-17-2007, 13:45

make sure you connect tp in the right way and using latest soft. this is 100% supported.

B.R.,
Raskal

Brains · 10-17-2007, 15:35

I have the Prob. I tried more thn 20 Times and got the same Result. Response Byte 08. The 5200 have realy easy Testpoints and I unlocked another Phone before. Whats wrong.
BR Michael

Brains · 10-17-2007, 15:53

Sorry it´s me again. The Prob with an 6280 V_03.81_09-05-06_RM-78 Spansion Chipset same Response Byte 08 unlock failed.
I use the Software 0.0.2.5. By the way the Server is down.
BR Michael

gyuszko · 10-17-2007, 16:44

5200 V5.0 is 100% supported with SEC xxxx ATD flash chip... just done one piece one hour ago

migsacho · 10-17-2007, 17:49

the tp is ok. I try several times. The soft I use is BB5Box 2.5 is the last version
So what's the problem?
Please read the next page: http:///vbb/showth...=453140&page=2
The user "phanafax_gsm" unlock RM-181 ok, but the problem with RM-174 is the same in the link
What is the solution?.
take into account that the phone a unlock is 5200 RH-174.

schwantz · 10-17-2007, 17:57

Yes here also 100% that phone and version

C.U.T. · 10-17-2007, 18:10

Same Problem here !

Searching for phone ...
Phone found on FBUS interface
Reading phone info ...
Type: RM-174
Version: V_05.00_27-04-07_RM-174_(c)_Nokia.
IMEI: 357672013189282
SP LOCK status:
Config Key: 2620700000000000
Block 1: CLOSED Type 5 Data: 262074
Block 2: CLOSED Type 5 Data: 262075
Keyboard wrong codes counter: 0 wrong tries from max. 3 tries
Cable wrong codes counter: 0 wrong tries from max. 10 tries
Set Full Factory Defaults ...
Reset phone ...
Reset phone in TEST mode ...
Full Factory Defaults set OK
Skip autobackup of PM 308
Autobackup file:
RM-174_357672013189282_Locked_Keycnt_0_Fbuscnt_0__V_0 5.00_27-04-07_RM-174_(c)_Nokia..bin
already exist
Checking if model/version is supported for unlock ...
Please connect testpoints
Testpoints connected OK
Keep Testpoints connected until unlock finish!
Unlocking phone ...
Try number: 1
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 2
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 3
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 4
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 5
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 6
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 7
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 8
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 9
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 10
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Unlock fail. Please try again.

Tried 20 times no luck !

Its not the first i unlock !

WBR

rozeilton · 10-17-2007, 18:15

5200 flash chip SECXXXXXATD, has that to make dowgrade for version 4.71, that it unlock 100%

migsacho · 10-17-2007, 18:15

I think is a bug t he soft with RM-174 ver. 4.71 and 5.00
RM-174 VER. 4.71
ERROR: Not suported model/version
RM-174 VER 5.00
Response byte: 08
Unlock fail. Please try again.

Please Solution. THANKS

C.U.T. · 10-17-2007, 19:08

Downgraded Phone to 4.71 and now its ok at first try phone unlocked !

Searching for phone ...
Phone found on FBUS interface
Reading phone info ...
Type: RM-174
Version: V_04.71_28-02-07_RM-174_(c)_Nokia.
IMEI: 357672013189282
SP LOCK status:
Config Key: 2620700000000000
Block 1: CLOSED Type 5 Data: 262074
Block 2: CLOSED Type 5 Data: 262075
Keyboard wrong codes counter: 0 wrong tries from max. 3 tries
Cable wrong codes counter: 0 wrong tries from max. 10 tries
Set Full Factory Defaults ...
Reset phone ...
Reset phone in TEST mode ...
Full Factory Defaults set OK
Create autobackup of PM 308
Reading PM Field 308 Subfield 1 with length 8192 bytes
Saving autobackup to file: RM-174_357672013189282_Locked_Keycnt_0_Fbuscnt_0__V_0 4.71_28-02-07_RM-174_(c)_Nokia..bin
Checking if model/version is supported for unlock ...
Please connect testpoints
Testpoints connected OK
Keep Testpoints connected until unlock finish!
Unlocking phone ...
Try number: 1
Sending SP code: #pw+012345678901234+7#
Response byte: 00
Reading again SP Locks ...
SP LOCK status:
Config Key: 2620700000000000
Block 1: OPEN Type 5 Data: 262074
Block 2: OPEN Type 5 Data: 262075
Keyboard wrong codes counter: 0 wrong tries from max. 3 tries
Cable wrong codes counter: 0 wrong tries from max. 10 tries
Phone unlocked succesfull

WBR

Windziarz · 10-17-2007, 19:43

my sugestion downgrade to 3.92 and try, Had one v5.00 today with same error after downgrade unlock with first time

migsacho · 10-17-2007, 20:16

Windziarz: yes with 3.92 is ok. I try downgrade to 3.92, but the phone dead. Only with 5.00 power

Stylo_GSM · 10-17-2007, 20:19

If the priblem is still there then downgrade to 3.7, As i had few of these with this problem.

Windziarz · 10-17-2007, 21:10

Quote:

Originally Posted by Stylo_GSM

If the priblem is still there then downgrade to 3.7, As i had few of these with this problem.

3.70 version is only supported with SEC xxxx-ATB memory with SEC xxxxx-ATD only 3.92 lowest version check with manual

B.R.

Windziarz

10-17-2007, 13:38	#1 (permalink)
migsacho Freak Poster Join Date: Dec 2006 Posts: 100 Member: 416119 Status: Offline Thanks Meter: 3	5200 Sec xxxx ATD ver 4.71 or 5.00 no unlock Ver 4.71 BB5Box 2.5 no unlock Searching for phone ... Phone found on FBUS interface Reading phone info ... Type: RM-174 Version: V_04.72_26-03-07_RM-174_(c)_Nokia. IMEI: 356439014482277 SP LOCK status: Config Key: 7300200000000000 Block 1: CLOSED Type 5 Data: 73002F Block 2: CLOSED Type 5 Data: 21407F Block 3: CLOSED Type 5 Data: 72207F Block 4: CLOSED Type 5 Data: 74807F Block 5: CLOSED Type 5 Data: 33403F Block 6: CLOSED Type 5 Data: 732123 Block 7: CLOSED Type 5 Data: 74000F Block 8: CLOSED Type 5 Data: 73002F Block 9: CLOSED Type 5 Data: 21407F Block 10: CLOSED Type 5 Data: 72207F Block 11: CLOSED Type 5 Data: 74807F Block 12: CLOSED Type 5 Data: 33403F Block 13: CLOSED Type 5 Data: 732123 Block 14: CLOSED Type 5 Data: 74000F Keyboard wrong codes counter: 0 wrong tries from max. 3 tries Cable wrong codes counter: 0 wrong tries from max. 10 tries Set Full Factory Defaults ... Reset phone ... Reset phone in TEST mode ... Full Factory Defaults set OK Create autobackup of PM 308 Reading PM Field 308 Subfield 1 with length 8192 bytes Saving autobackup to file: RM-174_356439014482277_Locked_Keycnt_0_Fbuscnt_0__V_0 4.72_26-03-07_RM-174_(c)_Nokia..bin Auto Write PM 308 procedure started Searching for backup file with lowest FBUS count ... Finded backup file: RM-174_356439014482277_Locked_Keycnt_0_Fbuscnt_0__V_0 4.72_26-03-07_RM-174_(c)_Nokia..bin Writting PM Field 308 Subfield 1 with length 8192 bytes Reset phone ... PM Field 308 Subfield 1 written OK Reading SP Locks after Auto Write PM 308 ... SP LOCK status: Config Key: 7300200000000000 Block 1: CLOSED Type 5 Data: 73002F Block 2: CLOSED Type 5 Data: 21407F Block 3: CLOSED Type 5 Data: 72207F Block 4: CLOSED Type 5 Data: 74807F Block 5: CLOSED Type 5 Data: 33403F Block 6: CLOSED Type 5 Data: 732123 Block 7: CLOSED Type 5 Data: 74000F Block 8: CLOSED Type 5 Data: 73002F Block 9: CLOSED Type 5 Data: 21407F Block 10: CLOSED Type 5 Data: 72207F Block 11: CLOSED Type 5 Data: 74807F Block 12: CLOSED Type 5 Data: 33403F Block 13: CLOSED Type 5 Data: 732123 Block 14: CLOSED Type 5 Data: 74000F Keyboard wrong codes counter: 0 wrong tries from max. 3 tries Cable wrong codes counter: 0 wrong tries from max. 10 tries Reset phone in TEST mode ... Checking if model/version is supported for unlock ... ERROR: Not suported model/version __________________________________________________ ______________ Ver 5.00 BB5BOX 2.5 Searching for phone ... Phone found on FBUS interface Reading phone info ... Type: RM-174 Version: V_05.00_27-04-07_RM-174_(c)_Nokia. IMEI: 356439014482277 SP LOCK status: Config Key: 7300200000000000 Block 1: CLOSED Type 5 Data: 73002F Block 2: CLOSED Type 5 Data: 21407F Block 3: CLOSED Type 5 Data: 72207F Block 4: CLOSED Type 5 Data: 74807F Block 5: CLOSED Type 5 Data: 33403F Block 6: CLOSED Type 5 Data: 732123 Block 7: CLOSED Type 5 Data: 74000F Block 8: CLOSED Type 5 Data: 73002F Block 9: CLOSED Type 5 Data: 21407F Block 10: CLOSED Type 5 Data: 72207F Block 11: CLOSED Type 5 Data: 74807F Block 12: CLOSED Type 5 Data: 33403F Block 13: CLOSED Type 5 Data: 732123 Block 14: CLOSED Type 5 Data: 74000F Keyboard wrong codes counter: 0 wrong tries from max. 3 tries Cable wrong codes counter: 0 wrong tries from max. 10 tries Set Full Factory Defaults ... Reset phone ... Reset phone in TEST mode ... Full Factory Defaults set OK Create autobackup of PM 308 Reading PM Field 308 Subfield 1 with length 8192 bytes Saving autobackup to file: RM-174_356439014482277_Locked_Keycnt_0_Fbuscnt_0__V_0 5.00_27-04-07_RM-174_(c)_Nokia..bin Auto Write PM 308 procedure started Searching for backup file with lowest FBUS count ... Finded backup file: RM-174_356439014482277_Locked_Keycnt_0_Fbuscnt_0__V_0 5.00_27-04-07_RM-174_(c)_Nokia..bin Writting PM Field 308 Subfield 1 with length 8192 bytes Reset phone ... PM Field 308 Subfield 1 written OK Reading SP Locks after Auto Write PM 308 ... SP LOCK status: Config Key: 7300200000000000 Block 1: CLOSED Type 5 Data: 73002F Block 2: CLOSED Type 5 Data: 21407F Block 3: CLOSED Type 5 Data: 72207F Block 4: CLOSED Type 5 Data: 74807F Block 5: CLOSED Type 5 Data: 33403F Block 6: CLOSED Type 5 Data: 732123 Block 7: CLOSED Type 5 Data: 74000F Block 8: CLOSED Type 5 Data: 73002F Block 9: CLOSED Type 5 Data: 21407F Block 10: CLOSED Type 5 Data: 72207F Block 11: CLOSED Type 5 Data: 74807F Block 12: CLOSED Type 5 Data: 33403F Block 13: CLOSED Type 5 Data: 732123 Block 14: CLOSED Type 5 Data: 74000F Keyboard wrong codes counter: 0 wrong tries from max. 3 tries Cable wrong codes counter: 0 wrong tries from max. 10 tries Reset phone in TEST mode ... Checking if model/version is supported for unlock ... Please connect testpoints Testpoints connected OK Keep Testpoints connected until unlock finish! Unlocking phone ... Try number: 1 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 2 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 3 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 4 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 5 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 6 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 7 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 8 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 9 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 10 Sending SP code: #pw+012345678901234+7# Response byte: 08 Unlock fail. Please try again. Please solve the problem ! Thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
5200 sec atd v 4.71 - not suported?!	OgorekPaul	BB5BOX	4	11-16-2007 16:55
6300 ver 4.71 downgrade problem => can't unlock	patric	MT-BOX	16	10-10-2007 00:01
5300 ver 5.00 wont unlock?????????	stemo	MT-BOX	2	09-08-2007 03:54
6300 from austria ver 4.70 or 4.71 can't be unlock	tiri piri	MT-BOX	21	07-13-2007 13:35

10-17-2007, 13:45	#2 (permalink)
Raskal Banned Join Date: Oct 1999 Age: 55 Posts: 14,535 Member: 563 Status: Offline Thanks Meter: 22,328	make sure you connect tp in the right way and using latest soft. this is 100% supported. B.R., Raskal

10-17-2007, 15:35	#3 (permalink)
Brains Major Poster Join Date: Oct 2004 Posts: 42 Member: 88541 Status: Offline Thanks Meter: 0	I have the Prob. I tried more thn 20 Times and got the same Result. Response Byte 08. The 5200 have realy easy Testpoints and I unlocked another Phone before. Whats wrong. BR Michael

10-17-2007, 15:53	#4 (permalink)
Brains Major Poster Join Date: Oct 2004 Posts: 42 Member: 88541 Status: Offline Thanks Meter: 0	Sorry it´s me again. The Prob with an 6280 V_03.81_09-05-06_RM-78 Spansion Chipset same Response Byte 08 unlock failed. I use the Software 0.0.2.5. By the way the Server is down. BR Michael

10-17-2007, 16:44	#5 (permalink)
gyuszko Product Supporter Join Date: Dec 2001 Location: in my skin Age: 47 Posts: 1,213 Member: 8086 Status: Offline Thanks Meter: 180	5200 V5.0 is 100% supported with SEC xxxx ATD flash chip... just done one piece one hour ago

10-17-2007, 17:49	#6 (permalink)
migsacho Freak Poster Join Date: Dec 2006 Posts: 100 Member: 416119 Status: Offline Thanks Meter: 3	the tp is ok. I try several times. The soft I use is BB5Box 2.5 is the last version So what's the problem? Please read the next page: http:///vbb/showth...=453140&page=2 The user "phanafax_gsm" unlock RM-181 ok, but the problem with RM-174 is the same in the link What is the solution?. take into account that the phone a unlock is 5200 RH-174.

10-17-2007, 17:57	#7 (permalink)
schwantz No Life Poster Join Date: Jun 2001 Location: Portugal Age: 48 Posts: 1,455 Member: 4975 Status: Offline Thanks Meter: 612	Yes here also 100% that phone and version

10-17-2007, 18:10	#8 (permalink)
C.U.T. Product Supporter Join Date: Oct 2007 Location: Crazy Unlocking Team Age: 53 Posts: 83 Member: 606868 Status: Offline Thanks Meter: 3	Same Problem here ! Searching for phone ... Phone found on FBUS interface Reading phone info ... Type: RM-174 Version: V_05.00_27-04-07_RM-174_(c)_Nokia. IMEI: 357672013189282 SP LOCK status: Config Key: 2620700000000000 Block 1: CLOSED Type 5 Data: 262074 Block 2: CLOSED Type 5 Data: 262075 Keyboard wrong codes counter: 0 wrong tries from max. 3 tries Cable wrong codes counter: 0 wrong tries from max. 10 tries Set Full Factory Defaults ... Reset phone ... Reset phone in TEST mode ... Full Factory Defaults set OK Skip autobackup of PM 308 Autobackup file: RM-174_357672013189282_Locked_Keycnt_0_Fbuscnt_0__V_0 5.00_27-04-07_RM-174_(c)_Nokia..bin already exist Checking if model/version is supported for unlock ... Please connect testpoints Testpoints connected OK Keep Testpoints connected until unlock finish! Unlocking phone ... Try number: 1 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 2 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 3 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 4 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 5 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 6 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 7 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 8 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 9 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 10 Sending SP code: #pw+012345678901234+7# Response byte: 08 Unlock fail. Please try again. Tried 20 times no luck ! Its not the first i unlock ! WBR

10-17-2007, 18:15	#9 (permalink)
rozeilton Junior Member Join Date: Apr 2007 Location: Brasil, Natal/RN Posts: 11 Member: 491353 Status: Offline Thanks Meter: 3	5200 flash chip SECXXXXXATD, has that to make dowgrade for version 4.71, that it unlock 100%

10-17-2007, 18:15	#10 (permalink)
migsacho Freak Poster Join Date: Dec 2006 Posts: 100 Member: 416119 Status: Offline Thanks Meter: 3	I think is a bug t he soft with RM-174 ver. 4.71 and 5.00 RM-174 VER. 4.71 ERROR: Not suported model/version RM-174 VER 5.00 Response byte: 08 Unlock fail. Please try again. Please Solution. THANKS

10-17-2007, 19:08	#11 (permalink)
C.U.T. Product Supporter Join Date: Oct 2007 Location: Crazy Unlocking Team Age: 53 Posts: 83 Member: 606868 Status: Offline Thanks Meter: 3	Downgraded Phone to 4.71 and now its ok at first try phone unlocked ! Searching for phone ... Phone found on FBUS interface Reading phone info ... Type: RM-174 Version: V_04.71_28-02-07_RM-174_(c)_Nokia. IMEI: 357672013189282 SP LOCK status: Config Key: 2620700000000000 Block 1: CLOSED Type 5 Data: 262074 Block 2: CLOSED Type 5 Data: 262075 Keyboard wrong codes counter: 0 wrong tries from max. 3 tries Cable wrong codes counter: 0 wrong tries from max. 10 tries Set Full Factory Defaults ... Reset phone ... Reset phone in TEST mode ... Full Factory Defaults set OK Create autobackup of PM 308 Reading PM Field 308 Subfield 1 with length 8192 bytes Saving autobackup to file: RM-174_357672013189282_Locked_Keycnt_0_Fbuscnt_0__V_0 4.71_28-02-07_RM-174_(c)_Nokia..bin Checking if model/version is supported for unlock ... Please connect testpoints Testpoints connected OK Keep Testpoints connected until unlock finish! Unlocking phone ... Try number: 1 Sending SP code: #pw+012345678901234+7# Response byte: 00 Reading again SP Locks ... SP LOCK status: Config Key: 2620700000000000 Block 1: OPEN Type 5 Data: 262074 Block 2: OPEN Type 5 Data: 262075 Keyboard wrong codes counter: 0 wrong tries from max. 3 tries Cable wrong codes counter: 0 wrong tries from max. 10 tries Phone unlocked succesfull WBR

10-17-2007, 19:43	#12 (permalink)
Windziarz No Life Poster Join Date: Dec 2002 Location: Poland Age: 44 Posts: 1,272 Member: 18406 Status: Offline Thanks Meter: 84	my sugestion downgrade to 3.92 and try, Had one v5.00 today with same error after downgrade unlock with first time

10-17-2007, 20:16	#13 (permalink)
migsacho Freak Poster Join Date: Dec 2006 Posts: 100 Member: 416119 Status: Offline Thanks Meter: 3	Windziarz: yes with 3.92 is ok. I try downgrade to 3.92, but the phone dead. Only with 5.00 power

10-17-2007, 20:19	#14 (permalink)
Stylo_GSM No Life Poster Join Date: Sep 2005 Location: UK, London Age: 35 Posts: 2,236 Member: 177235 Status: Offline Sonork: 111568 Thanks Meter: 138	If the priblem is still there then downgrade to 3.7, As i had few of these with this problem.