6280 unlock fail!
 

------ Operation: UNLOCK Date: 23-11-2007 Time: 14:57:44 -------

Connecting to BB5 Box ...
Searching for phone ...
Phone found on FBUS interface
Reading phone info ...
Type: RM-78
Version: V_03.65_22-03-06_RM-78_(c)_Nokia
IMEI: 35xxxxxxxxxxxxxx
SP LOCK status:
Config Key: 2343000000000000
Block 1: CLOSED Type 5 Data: 23430F
Keyboard wrong codes counter: 3 wrong tries from max. 3 tries
Cable wrong codes counter: 0 wrong tries from max. 10 tries
Reset phone in TEST mode ...
Set Full Factory Defaults ...
Reset phone ...
Reset phone in TEST mode ...
Full Factory Defaults set OK
Skip autobackup of PM 308
Autobackup file:
RM-78_35xxxxxxxxxxxxxxxx_Locked_Keycnt_3_Fbuscnt_0__V _03.65_22-03-06_RM-78_(c)_Nokia.bin
already exist
Auto Write PM 308 procedure started
Searching for backup file with lowest FBUS count ...
Finded backup file: RM-78_35xxxxxxxxxxxxxxx_Locked_Keycnt_3_Fbuscnt_0__V_ 03.65_22-03-06_RM-78_(c)_Nokia.bin
Writting PM Field 308 Subfield 1 with length 4096 bytes
Reset phone ...
PM Field 308 Subfield 1 written OK
Reading SP Locks after Auto Write PM 308 ...
SP LOCK status:
Config Key: 2343000000000000
Block 1: CLOSED Type 5 Data: 23430F
Keyboard wrong codes counter: 3 wrong tries from max. 3 tries
Cable wrong codes counter: 0 wrong tries from max. 10 tries
Reset phone in TEST mode ...
Checking if model/version is supported for unlock ...
Please connect testpoints
Testpoints connected OK
Keep Testpoints connected until unlock finish!
Unlocking phone ...
Try number: 1
Sending SP code: #pw+012345678901234+7#
Response byte: 55
Try number: 2
Sending SP code: #pw+012345678901234+7#
Response byte: 55
Try number: 3
Sending SP code: #pw+012345678901234+7#
Response byte: 55
Try number: 4
Sending SP code: #pw+012345678901234+7#
Response byte: 55
Try number: 5
Sending SP code: #pw+012345678901234+7#
Response byte: 55
Try number: 6
Sending SP code: #pw+012345678901234+7#
Response byte: 55
Try number: 7
Sending SP code: #pw+012345678901234+7#
Response byte: 55
Try number: 8
Sending SP code: #pw+012345678901234+7#
Response byte: 55
Try number: 9
Sending SP code: #pw+012345678901234+7#
Response byte: 55
Try number: 10
Sending SP code: #pw+012345678901234+7#
Response byte: 55
Unlock fail. Please try again.


Is it unlock possible or not

I think that it is bat Testpoints connected writen pm308 and unlock again

think 55 is ground problem, clip the ground crocodile on the vibrator motor, works for me

is your phone spansion? if so search 6280 spansion as they are problem phone, br torbay