I still can't unlock 6300 with SEC ATD flash - GSM-Forum

Szymon · 09-25-2007, 16:32

Searching for phone ...
Phone found on FBUS interface
Reading phone info ...
Type: RM-217
Version: V_05.00_27-04-07_RM-217_(c)_Nokia.
IMEI: 358052011354148
SP LOCK status:
Block 1: CLOSED Type 5 Data: 23433F
Block 2: CLOSED Type 5 Data: 23486F
Keyboard wrong codes counter: 0 wrong tries from max. 3 tries
Cable wrong codes counter: 0 wrong tries from max. 10 tries
Skip autobackup of PM 308
Autobackup file:
RM-217_358052011354XXX_Locked_Keycnt_0_Fbuscnt_0__V_0 5.00_27-04-07_RM-217_(c)_Nokia..bin
already exist
Checking if model/version is supported for unlock ...
Set Full Factory Defaults ...
Full Factory Defaults set OK
Please connect testpoints
Testpoints connected OK
Keep Testpoints connected until unlock finish!
Unlocking phone ...
Try number: 1
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 2
Sending SP code: #pw+012345678901234+7#
Response byte: 14
Try number: 3
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 4
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 5
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 6
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 7
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 8
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 9
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 10
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Unlock fail. Please try again.

bogym · 09-25-2007, 20:12

and I have an 6300 v. 5.00, chip ATD, and it doesn't working. I'll try tomorrow to put GNT to vibra motor, and i'll post results. i hope to be fine

BR
BogyM.

Falck · 09-25-2007, 21:28

Quote:

Originally Posted by bogym

and I have an 6300 v. 5.00, chip ATD, and it doesn't working. I'll try tomorrow to put GNT to vibra motor, and i'll post results. i hope to be fine

BR
BogyM.

Dont bother, it wont work until BB5Box is upgraded to support these type of chips, have tried this on 3 6300 phones, be patient

WBR Falck

khaledsarsam · 09-25-2007, 21:32

Even SECXXXXXXXATB Flash IC is not supported yet. Be patient!

Even downgraded to v4.70 tried, no success
Upgraded to v5.00 tried, no luck.

be patient!

Kanwalgee · 09-26-2007, 04:53

Yes same with me i test with 2 units but not success waiting for update

etscellular · 09-27-2007, 00:09

Quote:

Originally Posted by khaledsarsam

Even SECXXXXXXXATB Flash IC is not supported yet. Be patient!

Even downgraded to v4.70 tried, no success
Upgraded to v5.00 tried, no luck.

be patient!

Hi guysssss
I'm a new user for bb5 box i had 5 of 6300 need to be unlocked i did tried and tried but cant unlock at all now 5 of them are DEAD. i think PM problem. please help me to fix this problem if any 1 can help will appreciated . I dont know how to write PM bcoz the fon now dead please help
Thanx guyssssssss
BR

zbycho9 · 09-27-2007, 00:44

Quote:

Originally Posted by etscellular

Hi guysssss
I'm a new user for bb5 box i had 5 of 6300 need to be unlocked i did tried and tried but cant unlock at all now 5 of them are DEAD. i think PM problem. please help me to fix this problem if any 1 can help will appreciated . I dont know how to write PM bcoz the fon now dead please help
Thanx guyssssssss
BR

Dead what you meean ?? and how did you now that is PM problem I think you must flash them and write Pm file whit Jaf or Tornado

alfox · 09-27-2007, 03:06

Quote:

Originally Posted by etscellular

Hi guysssss
I'm a new user for bb5 box i had 5 of 6300 need to be unlocked i did tried and tried but cant unlock at all now 5 of them are DEAD. i think PM problem. please help me to fix this problem if any 1 can help will appreciated . I dont know how to write PM bcoz the fon now dead please help
Thanx guyssssssss
BR

i think youll just need to write the pm that is being back up in the process of unlocking.now the problem is if you didnt have the back up then that would be a very big problem....

sygnal · 09-27-2007, 03:26

write pm back the try again bro...

etscellular · 09-27-2007, 04:21

Quote:

Originally Posted by sygnal

write pm back the try again bro...

Thanx fpr quick reply bro

now the fon wont be able to turn on. i do have a back up file but the fon wont detect by bb5 box . always say error
need your help guyssss
thanx and BR

etscellular · 09-27-2007, 04:24

Quote:

Originally Posted by alfox

i think youll just need to write the pm that is being back up in the process of unlocking.now the problem is if you didnt have the back up then that would be a very big problem....

i think there is a big problem with mine. the fone now wont go to test mode or local mode so U it wont be able to write PM
thanx

Mang mel · 09-27-2007, 05:20

the phone need to rest dont do anything will be fine after an hours..

Falck · 09-27-2007, 07:26

Quote:

Originally Posted by mmb06

the phone need to rest dont do anything will be fine after an hours..

This trick doesn't work, have here 1 pcs. 6300 with exactly same problem after 10 tries, phone had a rest for about 3 hours but nothing happend. Only blue on both sides LEDS lights up, cant enter test or local mode. Its possible to flash phone with JAF (JAFSetup_1.98.27, newer versions cant) also tried to flash with HWK, all same, only blue LEDS lights up

WBR Falck

etscellular · 09-27-2007, 08:22

Quote:

Originally Posted by Falck

This trick doesn't work, have here 1 pcs. 6300 with exactly same problem after 10 tries, phone had a rest for about 3 hours but nothing happend. Only blue on both sides LEDS lights up, cant enter test or local mode. Its possible to flash phone with JAF (JAFSetup_1.98.27, newer versions cant) also tried to flash with HWK, all same, only blue LEDS lights up

WBR Falck

Yes Bro same problem. the fon REST too long already hehe still cant do nothing now. only 2 blue lights on the site.Any other trick to fix the problem pleaseeee thanx guysssss
BR

chiragp · 09-27-2007, 08:30

@friends

All Bb5 Box User Pls Wait For New Update For Different Flash Chip Inside [6300]

Better Wait For Good News

Thansk

09-25-2007, 16:32	#1 (permalink)
Szymon Junior Member Join Date: Oct 2002 Posts: 9 Member: 16293 Status: Offline Thanks Meter: 0	I still can't unlock 6300 with SEC ATD flash Searching for phone ... Phone found on FBUS interface Reading phone info ... Type: RM-217 Version: V_05.00_27-04-07_RM-217_(c)_Nokia. IMEI: 358052011354148 SP LOCK status: Block 1: CLOSED Type 5 Data: 23433F Block 2: CLOSED Type 5 Data: 23486F Keyboard wrong codes counter: 0 wrong tries from max. 3 tries Cable wrong codes counter: 0 wrong tries from max. 10 tries Skip autobackup of PM 308 Autobackup file: RM-217_358052011354XXX_Locked_Keycnt_0_Fbuscnt_0__V_0 5.00_27-04-07_RM-217_(c)_Nokia..bin already exist Checking if model/version is supported for unlock ... Set Full Factory Defaults ... Full Factory Defaults set OK Please connect testpoints Testpoints connected OK Keep Testpoints connected until unlock finish! Unlocking phone ... Try number: 1 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 2 Sending SP code: #pw+012345678901234+7# Response byte: 14 Try number: 3 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 4 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 5 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 6 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 7 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 8 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 9 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 10 Sending SP code: #pw+012345678901234+7# Response byte: 08 Unlock fail. Please try again.

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Z610i can't unlock, signed alt sec on	orheiz	SETool2	15	05-03-2011 13:17
Can't unlock 6300 217 with new update w/o tp	rj4eva	Universalbox	5	11-21-2008 11:28
Still Can't Unlock N93 with ver 1.04	kasamiko	BB5KING	0	11-14-2008 07:49
still can't unlock 6085 5.03 spansion with 4.0,what's wrong?help	liuyicun	BB5BOX	5	03-09-2008 21:04
Unlock 6300 whit SEC ATD succesfull :-)))))	ChouChou	BB5BOX	14	10-15-2007 04:17

09-25-2007, 20:12	#2 (permalink)
bogym Freak Poster Join Date: Jan 2004 Location: Romania Age: 43 Posts: 122 Member: 48872 Status: Offline Thanks Meter: 2	and I have an 6300 v. 5.00, chip ATD, and it doesn't working. I'll try tomorrow to put GNT to vibra motor, and i'll post results. i hope to be fine BR BogyM.

09-25-2007, 21:32	#4 (permalink)
khaledsarsam Crazy Poster Join Date: Oct 2004 Age: 42 Posts: 51 Member: 85984 Status: Offline Thanks Meter: 0	Even SECXXXXXXXATB Flash IC is not supported yet. Be patient! Even downgraded to v4.70 tried, no success Upgraded to v5.00 tried, no luck. be patient!

09-26-2007, 04:53	#5 (permalink)
Kanwalgee No Life Poster Join Date: Jun 2004 Location: China Age: 46 Posts: 2,737 Member: 68392 Status: Offline Sonork: 100.100701 Thanks Meter: 658	Yes same with me i test with 2 units but not success waiting for update

09-27-2007, 03:26	#9 (permalink)
sygnal No Life Poster Join Date: Feb 2006 Posts: 943 Member: 235471 Status: Offline Thanks Meter: 57	write pm back the try again bro...

09-27-2007, 05:20	#12 (permalink)
Mang mel No Life Poster Join Date: Jan 2006 Location: Philippines Posts: 1,361 Member: 218941 Status: Offline Thanks Meter: 1,801	the phone need to rest dont do anything will be fine after an hours..

09-27-2007, 08:30	#15 (permalink)
chiragp Cheater -Don't Deal with him- Join Date: Jan 2005 Location: U S A / GOA /CHINA Age: 44 Posts: 6,848 Member: 106367 Status: Offline Sonork: 100.1577436 Thanks Meter: 2,452	@friends All Bb5 Box User Pls Wait For New Update For Different Flash Chip Inside [6300] Better Wait For Good News Thansk