At last i m a big supporter of bb5 box and unlocked more than 50 fones without ne problem. but yesterday i got 3110c with 5.50 and downgrade it with 5.01 i tried 5 times to unlock it most of the time it gives error of reponse byte 07 and with 5v it gives response byte 55.now cell is dead.tried to flash with jaff and ufs but no success. Connecting to BB5 Box ... Searching for phone ... Phone found on FBUS interface Reading phone info ... Type: RM-237 Version: V_05.01_21-05-07_RM-237_(c)_Nokia. IMEI: 358672011960071 SP LOCK status: Config Key: FFFFFFFFFFFFFFFF Block 1: CLOSED Type 5 Data: 00101F Keyboard wrong codes counter: 0 wrong tries from max. 3 tries Cable wrong codes counter: 0 wrong tries from max. 10 tries Set Full Factory Defaults ... Reset phone ... Reset phone in TEST mode ... Full Factory Defaults set OK Skip autobackup of PM 308 Autobackup file: RM-237_358672011960071_Locked_Keycnt_0_Fbuscnt_0__V_0 5.01_21-05-07_RM-237_(c)_Nokia..bin already exist Auto Write PM 308 procedure started Searching for backup file with lowest FBUS count ... Finded backup file: RM-237_358672011960071_Locked_Keycnt_0_Fbuscnt_0__V_0 5.01_21-05-07_RM-237_(c)_Nokia..bin Writting PM Field 308 Subfield 1 with length 8192 bytes Reset phone ... PM Field 308 Subfield 1 written OK Reading SP Locks after Auto Write PM 308 ... SP LOCK status: Config Key: FFFFFFFFFFFFFFFF Block 1: CLOSED Type 5 Data: 00101F Keyboard wrong codes counter: 0 wrong tries from max. 3 tries Cable wrong codes counter: 0 wrong tries from max. 10 tries Reset phone in TEST mode ... Checking if model/version is supported for unlock ... Please connect testpoints Testpoints connected OK Keep Testpoints connected until unlock finish! Unlocking phone ... Try number: 1 Sending SP code: #pw+012345678901234+7# Response byte: 55 Try number: 2 Sending SP code: #pw+012345678901234+7# Response byte: 55 Try number: 3 Sending SP code: #pw+012345678901234+7# Response byte: 14 Try number: 4 Sending SP code: #pw+012345678901234+7# Response byte: 14 Try number: 5 Sending SP code: #pw+012345678901234+7# Response byte: 07 Try number: 6 Sending SP code: #pw+012345678901234+7# Response byte: 07 Try number: 7 Sending SP code: #pw+012345678901234+7# Response byte: 07 Try number: 8 Sending SP code: #pw+012345678901234+7# Response byte: 07 Try number: 9 Sending SP code: #pw+012345678901234+7# Response byte: 07 Try number: 10 Sending SP code: #pw+012345678901234+7# Response byte: 14 Unlock fail. Please try again. ------ Operation: UNLOCK Date: 01-01-2008 Time: 19:47:57 ------- Connecting to BB5 Box ... Searching for phone ... Phone found on FBUS interface Reading phone info ... Type: RM-237 Version: V_05.01_21-05-07_RM-237_(c)_Nokia. IMEI: 358672011960071 SP LOCK status: Config Key: FFFFFFFFFFFFFFFF Block 1: CLOSED Type 5 Data: 00101F Keyboard wrong codes counter: 0 wrong tries from max. 3 tries Cable wrong codes counter: 0 wrong tries from max. 10 tries Set Full Factory Defaults ... Reset phone ... Reset phone in TEST mode ... Full Factory Defaults set OK Skip autobackup of PM 308 Autobackup file: RM-237_358672011960071_Locked_Keycnt_0_Fbuscnt_0__V_0 5.01_21-05-07_RM-237_(c)_Nokia..bin already exist Auto Write PM 308 procedure started Searching for backup file with lowest FBUS count ... Finded backup file: RM-237_358672011960071_Locked_Keycnt_0_Fbuscnt_0__V_0 5.01_21-05-07_RM-237_(c)_Nokia..bin Writting PM Field 308 Subfield 1 with length 8192 bytes Reset phone ... PM Field 308 Subfield 1 written OK Reading SP Locks after Auto Write PM 308 ... SP LOCK status: Config Key: FFFFFFFFFFFFFFFF Block 1: CLOSED Type 5 Data: 00101F Keyboard wrong codes counter: 0 wrong tries from max. 3 tries Cable wrong codes counter: 0 wrong tries from max. 10 tries Reset phone in TEST mode ... Checking if model/version is supported for unlock ... Please connect testpoints Testpoints connected OK Keep Testpoints connected until unlock finish! Unlocking phone ... Try number: 1 Sending SP code: #pw+012345678901234+7# Response byte: 55 Try number: 2 Sending SP code: #pw+012345678901234+7# Response byte: 55 Try number: 3 Sending SP code: #pw+012345678901234+7# Response byte: 55 Try number: 4 Sending SP code: #pw+012345678901234+7# Response byte: 55 Try number: 5 Sending SP code: #pw+012345678901234+7# Response byte: 55 Try number: 6 Sending SP code: #pw+012345678901234+7# Response byte: 55 Try number: 7 Sending SP code: #pw+012345678901234+7# Response byte: 55 Try number: 8 Sending SP code: #pw+012345678901234+7# Response byte: 55 Try number: 9 Sending SP code: #pw+012345678901234+7# Response byte: 55 Try number: 10 Sending SP code: #pw+012345678901234+7# Response byte: 55 Unlock fail. Please try again. and now with jaff Error in sending reading cmd... Error in cmt get id.. thnx in adv tc |
3110c Problem Hello I have same problem like You , can You tell me after downgrade from 5.50 to 5.01 Your phone work OK is LIVE or No because I have one Piece after downgrade Try POWER ON Only NOKIA LOGO and phone go OFF I flash back 5.50 phone live so try to downgrade to ver.4.xx same phone DEAD :confused: , I flash it Back With MT-BOX and i put 9V on FBUS cable without ext power Flash dont start ... So try i hope that i help You wish All the Best in NEW 2008 Mario |
this is your problem Config Key: FFFFFFFFFFFFFFFF write rpl |
solution Your problem as mentioned above is Config Key: FFFFFFFFFFFFFFFF - that means SP Lock data is corrupted in this phone. This problem could be solved using any ASK/RPL service. GL, Deimantas |
thnx for replying after downgrading it was ok and 2ndly how can i write rpl on a dead set. tc. |
problem solved by repairing testpoints now only config ffffffffffff is remaining issue |
Being a supplier means that you should know about this things. The configuration key "tells" the phone the provider that should accept Your phone now it's alive but if you try any SIM card you will get SIM card rejected. It must have some information there. This information can't be modded (if this would be possible then unlock would be easy). Now you need to use JAF and CRT Tool, read ASK as specified by JAF manual at www.files.odeon.cn Choose anyone that will get the RPL file from Nokia for your phone and write it back to your damaged phone. As far as I remember those phones usually get PM damaged and for example charging it's impossible. Write a good PM using AUTH SX4 first, if you look at JAF official forum you will find all this has been already said BR Luskao |
good info bro by the way i m not a supplier only supporter(fan) of bb5 box which r very rare coz a big lobby is working against bb5 box and Raskal if u consider market situation, support and price then i guess bb5box is best now. |
All times are GMT +1. The time now is 06:12. |
vBulletin Optimisation provided by
vB Optimise (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -