* * * * Nokia 6280 Unlock Fail * * * * - GSM-Forum

E_H · 12-25-2007, 21:00

Hi

here is the log:

Connecting to BB5 Box ...
Searching for phone ...
Phone found on FBUS interface
Reading phone info ...
Type: RM-78
Version: V_06.43_30-03-07_RM-78_(c)_Nokia
IMEI: 35938200XXXXXXX
SP LOCK status:
Config Key: 2342000000000000
Block 1: CLOSED Type 5 Data: 23420F
Keyboard wrong codes counter: 0 wrong tries from max. 3 tries
Cable wrong codes counter: 10 wrong tries from max. 10 tries
Skip autobackup of PM 308
Autobackup file:
RM-78_359382008176173_Locked_Keycnt_0_Fbuscnt_10__V_0 6.43_30-03-07_RM-78_(c)_Nokia.bin
already exist
Auto Write PM 308 procedure started
Searching for backup file with lowest FBUS count ...
Finded backup file: RM-78_359382008176173_Locked_Keycnt_0_Fbuscnt_0__V_06 .43_30-03-07_RM-78_(c)_Nokia.bin
Writting PM Field 308 Subfield 1 with length 4096 bytes
Reset phone ...
PM Field 308 Subfield 1 written OK
Reading SP Locks after Auto Write PM 308 ...
SP LOCK status:
Config Key: 2342000000000000
Block 1: CLOSED Type 5 Data: 23420F
Keyboard wrong codes counter: 0 wrong tries from max. 3 tries
Cable wrong codes counter: 0 wrong tries from max. 10 tries
Reset phone in TEST mode ...
Checking if model/version is supported for unlock ...
Please connect testpoints
Testpoints connected OK
Keep Testpoints connected until unlock finish!
Unlocking phone ...
Try number: 1
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 2
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 3
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 4
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 5
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 6
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 7
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 8
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 9
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 10
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Unlock fail. Please try again.

Can someone please tell me where the problem is

Blartiartfast · 12-25-2007, 21:13

Just a standard log associated to either bad testpoint opr ground..Nothing on the log to show any other fault. Move the GND lead around..Worth a try.

Nurettin Duman · 12-25-2007, 21:14

problem is TP good microscope dan ok UNLOCK

A-H-T · 12-25-2007, 22:02

try to put the GND cable closer to CPU if it didn't work , try to choose different chip type "once SEC , and once Spansion"

if all that didn't work flash the phone with any firmware version that supported for unlock and try again and u will success .,

WBR

E_H · 12-25-2007, 22:58

[quote=A-H-T;2972437] , try to choose different chip type "once SEC , and once Spansion"
/quote]

are you sure about this, the chip on the phone is spansion
please can someone confirm this

abumu3ed · 12-26-2007, 02:30

spansion chips are little bit hard to unlock. keep trying you will succeed.

Blartiartfast · 12-26-2007, 02:40

6.43 is no problem to unlock really. Only problems I've ever had with this model is with a lower firmware. Yes you can try sec setting instead of spansion. Won't do any harm and often works.

Futuro · 12-26-2007, 02:43

The problem is most certainly with the Testpoint.

I allways have this problem when I dont get the TP right.

In this phone specifically it's almost always the Data TP (the one with the button)... the TP tracks are to close together and it is very easy to touch a nearby track and this causes error 08.

I attached a thiner needle to the tip for it to be easyer to hit just the right TP track.

Since I've done this I never got error 08 again. Always 100% OK!...

BR

Gadzio · 12-26-2007, 11:41

That's right. When is response 08 I know, that I didn't connect TP right.
But when I've got 55 I think, that it's something wrong with GND.
Today I tried 8 times to unlock 6280 Spansion. Finally I moved GND close to "Spansion" chip and:

------ Operation: UNLOCK Date: 26-12-2007 Time: 10:23:28 -------

Connecting to BB5 Box ...
Searching for phone ...
Phone found on FBUS interface
Reading phone info ...
Type: RM-78
Version: V_06.43_30-03-07_RM-78_(c)_Nokia
IMEI: 35186101421xxxx
SP LOCK status:
Config Key: 2342000000000000
Block 1: CLOSED Type 5 Data: 23420F
Keyboard wrong codes counter: 0 wrong tries from max. 3 tries
Cable wrong codes counter: 0 wrong tries from max. 10 tries
Reset phone in TEST mode ...
Set Full Factory Defaults ...
Reset phone ...
Reset phone in TEST mode ...
Full Factory Defaults set OK
Skip autobackup of PM 308
Autobackup file:
RM-78_35186101421xxxx_Locked_Keycnt_0_Fbuscnt_0__V_06 .43_30-03-07_RM-78_(c)_Nokia.bin
already exist
Checking if model/version is supported for unlock ...
Please connect testpoints
Testpoints connected OK
Keep Testpoints connected until unlock finish!
Unlocking phone ...
Try number: 1
Sending SP code: #pw+012345678901234+7#
Response byte: 00
Reading again SP Locks ...
SP LOCK status:
Config Key: 2342000000000000
Block 1: OPEN Type 5 Data: 23420F
Keyboard wrong codes counter: 0 wrong tries from max. 3 tries
Cable wrong codes counter: 0 wrong tries from max. 10 tries
Phone unlocked succesfull

Try, try and one more time try. BB5Box really works!!!

chandy pok · 12-26-2007, 13:35

[QUOTE=********-TOOLS;2972501]

Quote:

Originally Posted by A-H-T

, try to choose different chip type "once SEC , and once Spansion"
/quote]

are you sure about this, the chip on the phone is spansion
please can someone confirm this

U must modify the click cable . Take from eadset cable make it longer abit.Sure working 100%.Testd by me.

JONGOI · 12-26-2007, 13:59

one on one

--------------------------------------------------------------------------------

plize sir av searched thru the forum for the soltion to my problem and i cant find so i had to come and ask you on one on one basis

when i conect the phone and click unlock the process automaticaly goes all the way without stoping to give me a chance to put testpoints (it says testpoint conected while there is non) its like the software senses like ave connected testpoints while ave not conected then unlock fail

if i try to be fast and conect testpoints before the automatic process finishes the results are either the same unlock fail or the phone switches off and i get conection has bin lost

plize help me solve this its bin three weeks since i last unlock any phone

deepakgarg · 12-26-2007, 14:21

Quote:

Originally Posted by JONGOI

one on one

--------------------------------------------------------------------------------

plize sir av searched thru the forum for the soltion to my problem and i cant find so i had to come and ask you on one on one basis

when i conect the phone and click unlock the process automaticaly goes all the way without stoping to give me a chance to put testpoints (it says testpoint conected while there is non) its like the software senses like ave connected testpoints while ave not conected then unlock fail

if i try to be fast and conect testpoints before the automatic process finishes the results are either the same unlock fail or the phone switches off and i get conection has bin lost

plize help me solve this its bin three weeks since i last unlock any phone

check your cable properly or try use a new one.test and post results

A-H-T · 12-27-2007, 10:10

[QUOTE=********-TOOLS;2972501]

Quote:

Originally Posted by A-H-T

, try to choose different chip type "once SEC , and once Spansion"
/quote]

are you sure about this, the chip on the phone is spansion
please can someone confirm this

yes mate sometimes it works . tested by me .

http://forum.gsmhosting.com/vbb/showthread.php?t=476042

klodi · 12-27-2007, 11:48

only spansion is problem please bb5box team fix this problem

E_H · 12-27-2007, 12:37

[quote=A-H-T;2975596]

Quote:

Originally Posted by ********-TOOLS

yes mate sometimes it works . tested by me .

http://forum.gsmhosting.com/vbb/showthread.php?t=476042

after being told that i should try with sec although i had a spansion chip, it killed the phone at the first try

12-25-2007, 21:00	#1 (permalink)
E_H No Life Poster Join Date: Jul 2007 Location: Telegram Aceunlock Posts: 1,101 Member: 549784 Status: Offline Thanks Meter: 167	*** * * * Nokia 6280 Unlock Fail * * * *** Hi here is the log: Connecting to BB5 Box ... Searching for phone ... Phone found on FBUS interface Reading phone info ... Type: RM-78 Version: V_06.43_30-03-07_RM-78_(c)_Nokia IMEI: 35938200XXXXXXX SP LOCK status: Config Key: 2342000000000000 Block 1: CLOSED Type 5 Data: 23420F Keyboard wrong codes counter: 0 wrong tries from max. 3 tries Cable wrong codes counter: 10 wrong tries from max. 10 tries Skip autobackup of PM 308 Autobackup file: RM-78_359382008176173_Locked_Keycnt_0_Fbuscnt_10__V_0 6.43_30-03-07_RM-78_(c)_Nokia.bin already exist Auto Write PM 308 procedure started Searching for backup file with lowest FBUS count ... Finded backup file: RM-78_359382008176173_Locked_Keycnt_0_Fbuscnt_0__V_06 .43_30-03-07_RM-78_(c)_Nokia.bin Writting PM Field 308 Subfield 1 with length 4096 bytes Reset phone ... PM Field 308 Subfield 1 written OK Reading SP Locks after Auto Write PM 308 ... SP LOCK status: Config Key: 2342000000000000 Block 1: CLOSED Type 5 Data: 23420F Keyboard wrong codes counter: 0 wrong tries from max. 3 tries Cable wrong codes counter: 0 wrong tries from max. 10 tries Reset phone in TEST mode ... Checking if model/version is supported for unlock ... Please connect testpoints Testpoints connected OK Keep Testpoints connected until unlock finish! Unlocking phone ... Try number: 1 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 2 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 3 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 4 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 5 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 6 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 7 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 8 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 9 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 10 Sending SP code: #pw+012345678901234+7# Response byte: 08 Unlock fail. Please try again. Can someone please tell me where the problem is

12-26-2007, 13:59	#11 (permalink)
JONGOI Insane Poster Join Date: Jul 2004 Location: gaberone street kenya Posts: 60 Member: 72716 Status: Offline Thanks Meter: 2	one on one one on one -------------------------------------------------------------------------------- plize sir av searched thru the forum for the soltion to my problem and i cant find so i had to come and ask you on one on one basis when i conect the phone and click unlock the process automaticaly goes all the way without stoping to give me a chance to put testpoints (it says testpoint conected while there is non) its like the software senses like ave connected testpoints while ave not conected then unlock fail if i try to be fast and conect testpoints before the automatic process finishes the results are either the same unlock fail or the phone switches off and i get conection has bin lost plize help me solve this its bin three weeks since i last unlock any phone

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nokia E71 Unlock Failed - BB5 Unlock Failed -> Failed to get Lock Key (6, 5)	ronzinio	Cyclonebox	6	01-15-2010 14:34
6280 unlock fail!	tuhingr	BB5BOX	3	11-23-2007 12:33
6280 Unlock fail ?????	CEPHASTANESİ	BB5BOX	5	11-17-2007 23:51
6280 unlock failed!!!!!!!!!!	Jr Telecom	BB5BOX	31	11-03-2007 11:49

12-25-2007, 21:13	#2 (permalink)
Blartiartfast No Life Poster Join Date: May 2001 Location: U.K Age: 53 Posts: 1,425 Member: 4611 Status: Offline Thanks Meter: 68	Just a standard log associated to either bad testpoint opr ground..Nothing on the log to show any other fault. Move the GND lead around..Worth a try.

12-25-2007, 21:14	#3 (permalink)
Nurettin Duman Registered User Join Date: Feb 2005 Location: Turkiye :islam Posts: 2,911 Member: 115596 Status: Offline Sonork: [email protected] Thanks Meter: 1,127	problem is TP good microscope dan ok UNLOCK

12-25-2007, 22:02	#4 (permalink)
A-H-T No Life Poster Join Date: Aug 2003 Location: Palestine Posts: 1,130 Member: 36394 Status: Offline Thanks Meter: 250	try to put the GND cable closer to CPU if it didn't work , try to choose different chip type "once SEC , and once Spansion" if all that didn't work flash the phone with any firmware version that supported for unlock and try again and u will success ., WBR

12-25-2007, 22:58	#5 (permalink)
E_H No Life Poster Join Date: Jul 2007 Location: Telegram Aceunlock Posts: 1,101 Member: 549784 Status: Offline Thanks Meter: 167	[quote=A-H-T;2972437] , try to choose different chip type "once SEC , and once Spansion" /quote] are you sure about this, the chip on the phone is spansion please can someone confirm this

12-26-2007, 02:30	#6 (permalink)
abumu3ed No Life Poster Join Date: Mar 2007 Location: TuNiSiA Posts: 1,093 Member: 462224 Status: Offline Sonork: 100.1586374 Thanks Meter: 103	spansion chips are little bit hard to unlock. keep trying you will succeed.

12-26-2007, 02:40	#7 (permalink)
Blartiartfast No Life Poster Join Date: May 2001 Location: U.K Age: 53 Posts: 1,425 Member: 4611 Status: Offline Thanks Meter: 68	6.43 is no problem to unlock really. Only problems I've ever had with this model is with a lower firmware. Yes you can try sec setting instead of spansion. Won't do any harm and often works.

12-26-2007, 02:43	#8 (permalink)
Futuro No Life Poster Join Date: Nov 2004 Location: Portugal Age: 51 Posts: 543 Member: 90668 Status: Offline Thanks Meter: 57	The problem is most certainly with the Testpoint. I allways have this problem when I dont get the TP right. In this phone specifically it's almost always the Data TP (the one with the button)... the TP tracks are to close together and it is very easy to touch a nearby track and this causes error 08. I attached a thiner needle to the tip for it to be easyer to hit just the right TP track. Since I've done this I never got error 08 again. Always 100% OK!... BR

12-26-2007, 11:41	#9 (permalink)
Gadzio Insane Poster Join Date: Jun 2004 Age: 40 Posts: 87 Member: 70174 Status: Offline Thanks Meter: 7	That's right. When is response 08 I know, that I didn't connect TP right. But when I've got 55 I think, that it's something wrong with GND. Today I tried 8 times to unlock 6280 Spansion. Finally I moved GND close to "Spansion" chip and: ------ Operation: UNLOCK Date: 26-12-2007 Time: 10:23:28 ------- Connecting to BB5 Box ... Searching for phone ... Phone found on FBUS interface Reading phone info ... Type: RM-78 Version: V_06.43_30-03-07_RM-78_(c)_Nokia IMEI: 35186101421xxxx SP LOCK status: Config Key: 2342000000000000 Block 1: CLOSED Type 5 Data: 23420F Keyboard wrong codes counter: 0 wrong tries from max. 3 tries Cable wrong codes counter: 0 wrong tries from max. 10 tries Reset phone in TEST mode ... Set Full Factory Defaults ... Reset phone ... Reset phone in TEST mode ... Full Factory Defaults set OK Skip autobackup of PM 308 Autobackup file: RM-78_35186101421xxxx_Locked_Keycnt_0_Fbuscnt_0__V_06 .43_30-03-07_RM-78_(c)_Nokia.bin already exist Checking if model/version is supported for unlock ... Please connect testpoints Testpoints connected OK Keep Testpoints connected until unlock finish! Unlocking phone ... Try number: 1 Sending SP code: #pw+012345678901234+7# Response byte: 00 Reading again SP Locks ... SP LOCK status: Config Key: 2342000000000000 Block 1: OPEN Type 5 Data: 23420F Keyboard wrong codes counter: 0 wrong tries from max. 3 tries Cable wrong codes counter: 0 wrong tries from max. 10 tries Phone unlocked succesfull Try, try and one more time try. BB5Box really works!!!

12-27-2007, 11:48	#14 (permalink)
klodi No Life Poster Join Date: Jun 2005 Location: Albania -Durres Posts: 1,204 Member: 154346 Status: Offline Thanks Meter: 37	only spansion is problem please bb5box team fix this problem