Unlock fail N73 RM-133 why ?
 

Connecting to BB5 Box ...
Searching for phone ...
Phone found on FBUS interface
Reading phone info ...
Type: RM-133
Version: V_05wk47v38.1_19-01-07_RM-133_(c)_Nokia.
IMEI: 3576510179xxxxx
SP LOCK status:
Config Key: 2720500015194980
Block 1: CLOSED Type 5 Data: 27205F
Block 2: CLOSED Type 5 Data: 27205F
Block 3: CLOSED Type 5 Data: 23594F
Block 4: CLOSED Type 5 Data: 23594F
Keyboard wrong codes counter: 0 wrong tries from max. 3 tries
Cable wrong codes counter: 10 wrong tries from max. 10 tries
Set Full Factory Defaults ...
Reset phone ...
Reset phone in TEST mode ...
Full Factory Defaults set OK
Skip autobackup of PM 308
Autobackup file:
RM-133_3576510179xxxxx_Locked_Keycnt_0_Fbuscnt_10__V_ 05wk47v38.1_19-01-07_RM-133_(c)_Nokia..bin
already exist
Auto Write PM 308 procedure started
Searching for backup file with lowest FBUS count ...
Finded backup file: RM-133_3576510179xxxxx_Locked_Keycnt_0_Fbuscnt_0__V_0 5wk47v38.1_19-01-07_RM-133_(c)_Nokia..bin
Writting PM Field 308 Subfield 1 with length 8192 bytes
Reset phone ...
PM Field 308 Subfield 1 written OK
Reading SP Locks after Auto Write PM 308 ...
SP LOCK status:
Config Key: 2720500015194980
Block 1: CLOSED Type 5 Data: 27205F
Block 2: CLOSED Type 5 Data: 27205F
Block 3: CLOSED Type 5 Data: 23594F
Block 4: CLOSED Type 5 Data: 23594F
Keyboard wrong codes counter: 0 wrong tries from max. 3 tries
Cable wrong codes counter: 0 wrong tries from max. 10 tries
Reset phone in TEST mode ...
Checking if model/version is supported for unlock ...
Please connect testpoints
Testpoints connected OK
Keep Testpoints connected until unlock finish!
Unlocking phone ...
Try number: 1
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 2
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 3
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 4
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 5
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 6
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 7
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 8
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 9
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 10
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Unlock fail. Please try again.

How did you get to the test points I think mine are to thick.

test points ok .. clk at frist and data second

wrong tp... i guess...

no more idea .............

what about this mate?

this code enterd by box .. iam just click unlock

you have bb5box v28 version ?
If yes then maybe here is problem!

the testpoints are not ok Raskal confirmed the clk point cant be reached without modifying original testpoint.

you mean that test points connect in wrong mode ???

have tried with version 28 but always responce byte 08 use clk bga ball bottom row 14 from the right and data ball top row 3rd from right original clk needle has to be filed down to connect to clk ball , with version 26 had no problems but since upgrade for some reason cannot unlock any n73 problem also if you attempt to many times big risk to damage bga ball ................

chek tp lck,data. will be ok
To day I unlocked susesfull N73 and N75 with bb5 box.

i have try witn all ver upgrad witn 3.7 ang 4.7 and downgrad with 2.6 ... doting change unlock fail with all ver test points ok

I Have same problem. Testpoints OK. Who can help ?