Could you refund me? flash 2 times, charged twice still not unlock [Answered] - GSM-Forum

solution86 · 08-06-2022, 01:19

Operation: Unlock AppLock (TMB/ATT) via Server
Selected model: SM-G960U
Software version: 44.11

Checking Login and Password... OK
Balance: 21 crd.
You have 21 credit(s) left. This operation takes 6 credits. Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G960U
Android version: 10
PDA version: G960USQU9FUL1
CSC version: G960UOYN9FUL1
Phone version: G960USQU9FUL1
Product code: SM-G960UZPATMB
CSC country code: USA
CSC sales code: TMB
Carrier ID: TMB
Phone SN: R28K238C7EP
IMEI: 354825090249832
HW version: REV1.1
RF cal date: 2018.03.02
Chip name: SDM845
Modem board: SDM845
Security patch: 2021-12-01
Boot Warranty bit: 0
SIM State: NETWORK_LOCKED
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM24
Reading IMEI... OK
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (5)
AP version G960USQU9FUL1 is not supported, downgrade if possible

Operation: Flash
Selected model: SM-G960U
Software version: 44.11

File analysis... OK
Total file size: 0x16CA7E808 (5834 Mb)
Searching USB Flash interface... COM15 detected
Setup connection... OK
Getting device info... OK
Set PIT file... OK
Reading PIT from phone... OK
Sending abl.elf.lz4... OK
Sending xbl.elf.lz4... OK
Sending xbl_config.elf.lz4... OK
Sending tz.mbn.lz4... OK
Sending hyp.mbn.lz4... OK
Sending devcfg.mbn.lz4... OK
Sending pmic.elf.lz4... OK
Sending aop.mbn.lz4... OK
Sending cmnlib.mbn.lz4... OK
Sending cmnlib64.mbn.lz4... OK
Sending keymaster64.mbn.lz4... OK
Sending qupv3fw.elf.lz4... OK
Sending sec.dat.lz4... OK
Sending apdp.mbn.lz4... OK
Sending msadp.mbn.lz4... OK
Sending bksecapp.mbn.lz4... OK
Sending storsec.mbn.lz4... OK
Sending vaultkeeper.mbn.lz4... OK
Sending engmode.mbn.lz4... OK
Sending NON-HLOS.bin.lz4... OK
Sending boot.img.lz4... OK
Sending recovery.img.lz4... OK
Sending vendor.img.ext4.lz4... OK
Sending system.img.ext4.lz4... OK
Sending persist.img.ext4.lz4... OK
Sending dqmdbg.img.ext4.lz4... OK
Sending carrier.img.ext4.lz4... OK
Sending modem.bin.lz4... OK
Sending dspso.bin.lz4... OK
Sending cache.img.ext4.lz4... OK
Sending odm.img.ext4.lz4... OK
Sending omr.img.ext4.lz4... OK
Flashing done (time - 00:03:52)

Operation: Unlock AppLock (TMB/ATT) via Server
Selected model: SM-G960U
Software version: 44.11

Checking Login and Password... OK
Balance: 21 crd.
You have 21 credit(s) left. This operation takes 6 credits. Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G960U
Android version: 10
PDA version: G960USQS9FUA2
CSC version: G960UOYN9FUA2
Phone version: G960USQS9FUA2
Product code: SM-G960UZPATMB
CSC country code: USA
CSC sales code: TMB
Carrier ID: TMB
Phone SN: 384e574933573398
IMEI: 354825090249832
HW version: REV1.1
RF cal date: 2018.03.02
Chip name: SDM845
Modem board: SDM845
Security patch: 2021-01-01
Boot Warranty bit: 0
SIM State: NETWORK_LOCKED
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Trying to enable diag port... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM24
Reading IMEI... OK
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching Ramdump interface... COM15 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... error (0.)
Retry 1...
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.7.-2)
Retry 2...
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.7.-2)
Retry 3...
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.7.-2)
Retry 4...
Operation aborted

Operation: Unlock AppLock (TMB/ATT) via Server
Selected model: SM-G960U
Software version: 44.11

Checking Login and Password... OK
Balance: 15 crd.
You have 15 credit(s) left. This operation takes 6 credits. Continue? No
Operation: Flash
Selected model: SM-G960U
Software version: 44.11

Searching phone and switching to flash mode... OK

Operation: Flash
Selected model: SM-G960U
Software version: 44.11

File analysis... OK
Total file size: 0x1EA2851B4 (7842 Mb)
Searching USB Flash interface... COM15 detected
Setup connection... OK
Getting device info... OK
Set PIT file... OK
Reading PIT from phone... OK
Sending abl.elf.lz4... OK
Sending xbl.elf.lz4... OK
Sending xbl_config.elf.lz4... OK
Sending tz.mbn.lz4... OK
Sending hyp.mbn.lz4... OK
Sending devcfg.mbn.lz4... OK
Sending pmic.elf.lz4... OK
Sending aop.mbn.lz4... OK
Sending cmnlib.mbn.lz4... OK
Sending cmnlib64.mbn.lz4... OK
Sending keymaster64.mbn.lz4... OK
Sending qupv3fw.elf.lz4... OK
Sending sec.dat.lz4... OK
Sending apdp.mbn.lz4... OK
Sending msadp.mbn.lz4... OK
Sending bksecapp.mbn.lz4... OK
Sending storsec.mbn.lz4... OK
Sending vaultkeeper.mbn.lz4... OK
Sending engmode.mbn.lz4... OK
Sending NON-HLOS.bin.lz4... OK
Sending boot.img.lz4... OK
Sending recovery.img.lz4... OK
Sending vendor.img.ext4.lz4... OK
Sending system.img.ext4.lz4... OK
Sending persist.img.ext4.lz4... OK
Sending dqmdbg.img.ext4.lz4... OK
Sending carrier.img.ext4.lz4... OK
Sending modem.bin.lz4... OK
Sending dspso.bin.lz4... OK
Sending cache.img.ext4.lz4... OK
Sending odm.img.ext4.lz4... OK
Sending omr.img.ext4.lz4... OK
Sending userdata.img.ext4.lz4... OK
Sending cache.img.ext4.lz4... OK
Flashing done (time - 00:05:07)

Operation: Unlock AppLock (TMB/ATT) via Server
Selected model: SM-G960U
Software version: 44.11

Checking Login and Password... OK
Balance: 15 crd.
You have 15 credit(s) left. This operation takes 6 credits. Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G960U
Android version: 10
PDA version: G960USQU9FUE1
CSC version: G960UOYN9FUE1
Phone version: G960USQU9FUE1
Product code: SM-G960UZPATMB
CSC country code: USA
CSC sales code: TMB
Carrier ID: TMB
Phone SN: R28K238C7EP
IMEI: 354825090249832
HW version: REV1.1
RF cal date: 2018.03.02
Chip name: SDM845
Modem board: SDM845
Security patch: 2021-05-01
Boot Warranty bit: 0
SIM State: NETWORK_LOCKED
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Trying to enable diag port... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM24
Reading IMEI... OK
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching Ramdump interface... COM15 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... error (0.)
Retry 1...
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.7.-2)
Retry 2...
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.7.-2)
Retry 3...
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.7.-2)
Retry 4...
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.7.-2)
Retry 5...
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.7.-2)
Retry 6...
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... error (0.)
Operation aborted

Z3X · 08-06-2022, 04:37

Hello. Refunded. Repeat again.

08-06-2022, 01:19	#1 (permalink)
solution86 Junior Member Join Date: Jul 2007 Location: República Dominicana Posts: 30 Member: 555917 Status: Offline Thanks Meter: 4	Could you refund me? flash 2 times, charged twice still not unlock [Answered] Operation: Unlock AppLock (TMB/ATT) via Server Selected model: SM-G960U Software version: 44.11 Checking Login and Password... OK Balance: 21 crd. You have 21 credit(s) left. This operation takes 6 credits. Continue? Yes Waiting ADB device... OK Reading phone info... Model: SM-G960U Android version: 10 PDA version: G960USQU9FUL1 CSC version: G960UOYN9FUL1 Phone version: G960USQU9FUL1 Product code: SM-G960UZPATMB CSC country code: USA CSC sales code: TMB Carrier ID: TMB Phone SN: R28K238C7EP IMEI: 354825090249832 HW version: REV1.1 RF cal date: 2018.03.02 Chip name: SDM845 Modem board: SDM845 Security patch: 2021-12-01 Boot Warranty bit: 0 SIM State: NETWORK_LOCKED Waiting for device to become ready... OK Searching Samsung diag port... detected COM24 Reading IMEI... OK Initialization zTool Loader... OK Running zTool, please wait... OK Loading... OK Initialization zTool... OK Running zTool, please wait... OK Reading data from phone... error (5) AP version G960USQU9FUL1 is not supported, downgrade if possible Operation: Flash Selected model: SM-G960U Software version: 44.11 File analysis... OK Total file size: 0x16CA7E808 (5834 Mb) Searching USB Flash interface... COM15 detected Setup connection... OK Getting device info... OK Set PIT file... OK Reading PIT from phone... OK Sending abl.elf.lz4... OK Sending xbl.elf.lz4... OK Sending xbl_config.elf.lz4... OK Sending tz.mbn.lz4... OK Sending hyp.mbn.lz4... OK Sending devcfg.mbn.lz4... OK Sending pmic.elf.lz4... OK Sending aop.mbn.lz4... OK Sending cmnlib.mbn.lz4... OK Sending cmnlib64.mbn.lz4... OK Sending keymaster64.mbn.lz4... OK Sending qupv3fw.elf.lz4... OK Sending sec.dat.lz4... OK Sending apdp.mbn.lz4... OK Sending msadp.mbn.lz4... OK Sending bksecapp.mbn.lz4... OK Sending storsec.mbn.lz4... OK Sending vaultkeeper.mbn.lz4... OK Sending engmode.mbn.lz4... OK Sending NON-HLOS.bin.lz4... OK Sending boot.img.lz4... OK Sending recovery.img.lz4... OK Sending vendor.img.ext4.lz4... OK Sending system.img.ext4.lz4... OK Sending persist.img.ext4.lz4... OK Sending dqmdbg.img.ext4.lz4... OK Sending carrier.img.ext4.lz4... OK Sending modem.bin.lz4... OK Sending dspso.bin.lz4... OK Sending cache.img.ext4.lz4... OK Sending odm.img.ext4.lz4... OK Sending omr.img.ext4.lz4... OK Flashing done (time - 00:03:52) Operation: Unlock AppLock (TMB/ATT) via Server Selected model: SM-G960U Software version: 44.11 Checking Login and Password... OK Balance: 21 crd. You have 21 credit(s) left. This operation takes 6 credits. Continue? Yes Waiting ADB device... OK Reading phone info... Model: SM-G960U Android version: 10 PDA version: G960USQS9FUA2 CSC version: G960UOYN9FUA2 Phone version: G960USQS9FUA2 Product code: SM-G960UZPATMB CSC country code: USA CSC sales code: TMB Carrier ID: TMB Phone SN: 384e574933573398 IMEI: 354825090249832 HW version: REV1.1 RF cal date: 2018.03.02 Chip name: SDM845 Modem board: SDM845 Security patch: 2021-01-01 Boot Warranty bit: 0 SIM State: NETWORK_LOCKED Rebooting phone... OK Waiting ADB device... OK Rebooting phone... OK Waiting ADB device... OK Waiting for device to become ready... OK Initialization zTool... OK Running zTool, please wait... OK Trying to enable diag port... OK Waiting ADB device... OK Waiting for device to become ready... OK Searching Samsung diag port... detected COM24 Reading IMEI... OK Initialization zTool Loader... OK Running zTool, please wait... OK Loading... OK Initialization zTool... OK Running zTool, please wait... OK Reading data from phone... OK Searching Ramdump interface... COM15 detected Reading data from phone... OK Calculating... OK Searching server... OK Waiting for server answer... OK Waiting ADB device... OK Waiting for device to become ready... OK Initialization zTool Loader... OK Running zTool, please wait... OK Loading... error (0.) Retry 1... Initialization zTool Loader... OK Running zTool, please wait... OK Loading... OK Initialization zTool... OK Running zTool, please wait... OK Reading data from phone... error (4.7.-2) Retry 2... Initialization zTool Loader... OK Running zTool, please wait... OK Loading... OK Initialization zTool... OK Running zTool, please wait... OK Reading data from phone... error (4.7.-2) Retry 3... Initialization zTool Loader... OK Running zTool, please wait... OK Loading... OK Initialization zTool... OK Running zTool, please wait... OK Reading data from phone... error (4.7.-2) Retry 4... Operation aborted Operation: Unlock AppLock (TMB/ATT) via Server Selected model: SM-G960U Software version: 44.11 Checking Login and Password... OK Balance: 15 crd. You have 15 credit(s) left. This operation takes 6 credits. Continue? No Operation: Flash Selected model: SM-G960U Software version: 44.11 Searching phone and switching to flash mode... OK Operation: Flash Selected model: SM-G960U Software version: 44.11 File analysis... OK Total file size: 0x1EA2851B4 (7842 Mb) Searching USB Flash interface... COM15 detected Setup connection... OK Getting device info... OK Set PIT file... OK Reading PIT from phone... OK Sending abl.elf.lz4... OK Sending xbl.elf.lz4... OK Sending xbl_config.elf.lz4... OK Sending tz.mbn.lz4... OK Sending hyp.mbn.lz4... OK Sending devcfg.mbn.lz4... OK Sending pmic.elf.lz4... OK Sending aop.mbn.lz4... OK Sending cmnlib.mbn.lz4... OK Sending cmnlib64.mbn.lz4... OK Sending keymaster64.mbn.lz4... OK Sending qupv3fw.elf.lz4... OK Sending sec.dat.lz4... OK Sending apdp.mbn.lz4... OK Sending msadp.mbn.lz4... OK Sending bksecapp.mbn.lz4... OK Sending storsec.mbn.lz4... OK Sending vaultkeeper.mbn.lz4... OK Sending engmode.mbn.lz4... OK Sending NON-HLOS.bin.lz4... OK Sending boot.img.lz4... OK Sending recovery.img.lz4... OK Sending vendor.img.ext4.lz4... OK Sending system.img.ext4.lz4... OK Sending persist.img.ext4.lz4... OK Sending dqmdbg.img.ext4.lz4... OK Sending carrier.img.ext4.lz4... OK Sending modem.bin.lz4... OK Sending dspso.bin.lz4... OK Sending cache.img.ext4.lz4... OK Sending odm.img.ext4.lz4... OK Sending omr.img.ext4.lz4... OK Sending userdata.img.ext4.lz4... OK Sending cache.img.ext4.lz4... OK Flashing done (time - 00:05:07) Operation: Unlock AppLock (TMB/ATT) via Server Selected model: SM-G960U Software version: 44.11 Checking Login and Password... OK Balance: 15 crd. You have 15 credit(s) left. This operation takes 6 credits. Continue? Yes Waiting ADB device... OK Reading phone info... Model: SM-G960U Android version: 10 PDA version: G960USQU9FUE1 CSC version: G960UOYN9FUE1 Phone version: G960USQU9FUE1 Product code: SM-G960UZPATMB CSC country code: USA CSC sales code: TMB Carrier ID: TMB Phone SN: R28K238C7EP IMEI: 354825090249832 HW version: REV1.1 RF cal date: 2018.03.02 Chip name: SDM845 Modem board: SDM845 Security patch: 2021-05-01 Boot Warranty bit: 0 SIM State: NETWORK_LOCKED Rebooting phone... OK Waiting ADB device... OK Rebooting phone... OK Waiting ADB device... OK Waiting for device to become ready... OK Initialization zTool... OK Running zTool, please wait... OK Trying to enable diag port... OK Waiting ADB device... OK Waiting for device to become ready... OK Searching Samsung diag port... detected COM24 Reading IMEI... OK Initialization zTool Loader... OK Running zTool, please wait... OK Loading... OK Initialization zTool... OK Running zTool, please wait... OK Reading data from phone... OK Searching Ramdump interface... COM15 detected Reading data from phone... OK Calculating... OK Searching server... OK Waiting for server answer... OK Waiting ADB device... OK Waiting for device to become ready... OK Initialization zTool Loader... OK Running zTool, please wait... OK Loading... error (0.) Retry 1... Initialization zTool Loader... OK Running zTool, please wait... OK Loading... OK Initialization zTool... OK Running zTool, please wait... OK Reading data from phone... error (4.7.-2) Retry 2... Initialization zTool Loader... OK Running zTool, please wait... OK Loading... OK Initialization zTool... OK Running zTool, please wait... OK Reading data from phone... error (4.7.-2) Retry 3... Initialization zTool Loader... OK Running zTool, please wait... OK Loading... OK Initialization zTool... OK Running zTool, please wait... OK Reading data from phone... error (4.7.-2) Retry 4... Initialization zTool Loader... OK Running zTool, please wait... OK Loading... OK Initialization zTool... OK Running zTool, please wait... OK Reading data from phone... error (4.7.-2) Retry 5... Initialization zTool Loader... OK Running zTool, please wait... OK Loading... OK Initialization zTool... OK Running zTool, please wait... OK Reading data from phone... error (4.7.-2) Retry 6... Initialization zTool Loader... OK Running zTool, please wait... OK Loading... error (0.) Operation aborted

08-06-2022, 04:37	#2 (permalink)
Z3X Product Supporter Join Date: Feb 2008 Location: z3x Posts: 15,934 Member: 706257 Status: Offline Thanks Meter: 5,056	Hello. Refunded. Repeat again.