c3303k can't read code whith usb - GSM-Forum

algeriano_19 · 01-31-2011, 11:45

Selected model: C3303
Selected com port: COM16
Selected speed port: 921600
Press "volume up" + "lock" and connect USB cable to phone
Connect to control pipe... OK
Processor ID -> 0A33
Sending loader... OK
Connect to control pipe... OK
Connect to write pipe... OK
Connect to read pipe... OK
Damping... OK
Phone IMEI -> 35395804650589
Phone SW -> C3303KJPJG3
Langpack-> Arabic
Phone HW -> MP 0.802
Phone BT ADDR -> 101D-C0-A1015A
Phone WI-FI ADDR ->
[NET LOCK]:
[SIM LOCK]:
[PHONE LOCK]:
[SP LOCK]:
Read Info - ok
Elapsed time: 73 second, sw ver: 3.4.0076

Mustansar · 01-31-2011, 12:27

yeah it can,t so try with microuart cable

bhgsmservis · 01-31-2011, 14:12

Also I try on many C3300K read code.
Not work

For unlock must use Direct Unlock !

BR

Quote:

Press "volume up" + "lock" and connect USB cable to phone
Connect to control pipe... OK
Processor ID -> 0A33
Sending loader... OK
Connect to control pipe... OK
Connect to write pipe... OK
Connect to read pipe... OK
Damping... OK
Phone IMEI -> 355171xxxxxxxx
Phone SW -> C3300KXXJH3
Langpack-> Austria, Belgium, France, Germany, Hungary, Italy, Spain, United Kingdom
Phone HW -> MP 0.802
Phone BT ADDR -> 3C8B-FE-864ABA
Phone WI-FI ADDR ->
[NET LOCK]:
[SIM LOCK]:
[PHONE LOCK]:
[SP LOCK]:
Read Info - ok
Elapsed time: 71 second, sw ver: 3.5.0001

most_powerful · 01-31-2011, 15:40

few days back i managed to unlock C3300K with a micro-usb cable. It Read codes. need to install ST DFU drivers for C3300, which are located in Z3X folder, in Program Files. here is log:

Selected model: C3300K
Selected com port: COM4
Selected speed port: 921600
Press "volume up" + "lock" and connect USB cable to phone
Connect to control pipe... OK
Processor ID -> 0A33
Sending loader... OK
Connect to control pipe... OK
Connect to write pipe... OK
Connect to read pipe... OK
Damping... OK
Phone IMEI -> 35334004186179
Phone SW -> C3300KBUJG4
Langpack-> Vodafone
Phone HW -> MP 0.800
Phone BT ADDR -> D488-90-9105BF
Phone WI-FI ADDR ->
[NET LOCK]:50617040,
[SIM LOCK]:00000000,
[PHONE LOCK]:00000000,
[SP LOCK]:00000000,
Read Info - ok
Elapsed time: 85 second, sw ver: 3.4.0074

P.S, USE 3.4.0074 not 0076, coz i had problem with 0076

69eyes · 02-01-2011, 02:46

Quote:

Originally Posted by most_powerful

few days back i managed to unlock C3300K with a micro-usb cable. It Read codes. need to install ST DFU drivers for C3300, which are located in Z3X folder, in Program Files. here is log:

Selected model: C3300K
Selected com port: COM4
Selected speed port: 921600
Press "volume up" + "lock" and connect USB cable to phone
Connect to control pipe... OK
Processor ID -> 0A33
Sending loader... OK
Connect to control pipe... OK
Connect to write pipe... OK
Connect to read pipe... OK
Damping... OK
Phone IMEI -> 35334004186179
Phone SW -> C3300KBUJG4
Langpack-> Vodafone
Phone HW -> MP 0.800
Phone BT ADDR -> D488-90-9105BF
Phone WI-FI ADDR ->
[NET LOCK]:50617040,
[SIM LOCK]:00000000,
[PHONE LOCK]:00000000,
[SP LOCK]:00000000,
Read Info - ok
Elapsed time: 85 second, sw ver: 3.4.0074

P.S, USE 3.4.0074 not 0076, coz i had problem with 0076

Hi! Yes, its true. Work 100% fine.

Code:

Selected model: C3300K
Selected com port: COM9
Selected speed port: 921600
Press "volume up" + "lock" and connect USB cable to phone
Connect to control pipe... OK
Processor ID -> 0A33
Sending loader... OK
Connect to control pipe... OK
Connect to write pipe... OK
Connect to read pipe... OK
Damping... OK
Phone IMEI -> 3xxxxxxxxxxxxxxxxxxx
Phone SW -> C3300KVSJH3
Langpack-> Not found langpack !
Phone HW -> MP 0.802
Phone BT ADDR -> BC47-60-464E99
Phone WI-FI ADDR ->
[NET LOCK]:23951170,
[SIM LOCK]:00000000,
[PHONE LOCK]:00000000,
[SP LOCK]:00000000,
Read Info - ok
Elapsed time: 79 second, sw ver: 3.5.0002
-------------------------------------------------------------------------------

Best Regards

yueyo · 02-03-2011, 19:35

Is the phone need to be power on or off?

most_powerful · 02-04-2011, 11:43

Quote:

Originally Posted by yueyo

Is the phone need to be power on or off?

if you are doing it with usb cable then fone should be OFF. Im not sure aboiut UART-COM cable, coz ive not tried it, but i think fone should be ON when using COM cable.

Mobile-U · 02-04-2011, 13:27

doesn't work after sending loader at +- 98% error

i have installed the old software and it works 100%

yueyo · 02-04-2011, 22:12

Quote:

Originally Posted by Mobile-U

doesn't work after sending loader at +- 98% error

i have installed the old software and it works 100%

Which software did you use? How did you process it?

Battery in or out
Phone on or off

01-31-2011, 11:45	#1 (permalink)
algeriano_19 No Life Poster Join Date: Mar 2006 Location: in my h.d.d Posts: 583 Member: 252178 Status: Offline Sonork: 100.1582561 Thanks Meter: 123	c3303k can't read code whith usb Selected model: C3303 Selected com port: COM16 Selected speed port: 921600 Press "volume up" + "lock" and connect USB cable to phone Connect to control pipe... OK Processor ID -> 0A33 Sending loader... OK Connect to control pipe... OK Connect to write pipe... OK Connect to read pipe... OK Damping... OK Phone IMEI -> 35395804650589 Phone SW -> C3303KJPJG3 Langpack-> Arabic Phone HW -> MP 0.802 Phone BT ADDR -> 101D-C0-A1015A Phone WI-FI ADDR -> [NET LOCK]: [SIM LOCK]: [PHONE LOCK]: [SP LOCK]: Read Info - ok Elapsed time: 73 second, sw ver: 3.4.0076

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help: Forgot my 6110 user lock code!!	GByte9	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	02-26-2016 14:52
PIN1/PIN2 CODE	Jon	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	12-26-2012 04:40
Eeprom reading	KLImax	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	09-22-2011 15:55
5110 Security Code Help!	cahrisma	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	07-05-2010 09:04

01-31-2011, 12:27	#2 (permalink)
Mustansar No Life Poster Join Date: Jul 2009 Location: GsmWorld Age: 35 Posts: 564 Member: 1081067 Status: Offline Thanks Meter: 107	yeah it can,t so try with microuart cable

01-31-2011, 15:40	#4 (permalink)
most_powerful No Life Poster Join Date: May 2006 Posts: 678 Member: 275689 Status: Offline Thanks Meter: 64	few days back i managed to unlock C3300K with a micro-usb cable. It Read codes. need to install ST DFU drivers for C3300, which are located in Z3X folder, in Program Files. here is log: Selected model: C3300K Selected com port: COM4 Selected speed port: 921600 Press "volume up" + "lock" and connect USB cable to phone Connect to control pipe... OK Processor ID -> 0A33 Sending loader... OK Connect to control pipe... OK Connect to write pipe... OK Connect to read pipe... OK Damping... OK Phone IMEI -> 35334004186179 Phone SW -> C3300KBUJG4 Langpack-> Vodafone Phone HW -> MP 0.800 Phone BT ADDR -> D488-90-9105BF Phone WI-FI ADDR -> [NET LOCK]:50617040, [SIM LOCK]:00000000, [PHONE LOCK]:00000000, [SP LOCK]:00000000, Read Info - ok Elapsed time: 85 second, sw ver: 3.4.0074 P.S, USE 3.4.0074 not 0076, coz i had problem with 0076

02-03-2011, 19:35	#6 (permalink)
yueyo No Life Poster Join Date: Sep 2003 Posts: 1,022 Member: 38307 Status: Offline Thanks Meter: 66	Is the phone need to be power on or off?

02-04-2011, 13:27	#8 (permalink)
Mobile-U Insane Poster Join Date: Jan 2004 Location: The Nedherlads Age: 55 Posts: 60 Member: 49443 Status: Offline Thanks Meter: 5	doesn't work after sending loader at +- 98% error i have installed the old software and it works 100%