error why? [Answered] - GSM-Forum

mahi20015 · 03-06-2021, 12:59

REPAIR INSTRUCTIONS:
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options',
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Reboot to...' button and select mode to reboot (download or recovery).

Operation: Repair Nov 2019
Selected model: SM-G570F
Software version: 42.3

Waiting ADB device... OK
Reading phone info...
Model: SM-G570F
Android version: 8.0.0
PDA version: G570FXXS4CTJ7
CSC version: G570FOJV4CTJ2
Phone version: G570FXXS4CTJ5
Product code: SM-G570FZDDTHR
CSC country code: IRAN
CSC sales code: THR
Phone SN: R58J81M1FAM
IMEI: 352086092584377
HW version: MP 0.500
RF cal date: 20170808
Chip name: EXYNOS7570
Modem board: SHANNON305
Security patch: 2020-10-01
Boot Warranty bit: 0
SIM State: ABSENT,READY
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (0 5.2)
Reboot phone and try again.
Check ADB drivers, USB cable. Don't use USB Hubs
If this repeated then reflash phone and make factory reset.

Done with Samsung Tool PRO v.42.3

Z3X · 03-06-2021, 13:49

Hello. Currently bit4 not supported. Please wait for updates.

Z3X · 03-06-2021, 13:49

Hello. Currently bit4 not supported. Please wait for updates.

03-06-2021, 12:59	#1 (permalink)
mahi20015 No Life Poster Join Date: Jan 2015 Posts: 4,253 Member: 2325887 Status: Offline Thanks Meter: 134	error why? [Answered] REPAIR INSTRUCTIONS: 1. Power on the phone. 2. Enable 'USB debugging' in 'Settings'-'Developer options', tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Press 'Reboot to...' button and select mode to reboot (download or recovery). Operation: Repair Nov 2019 Selected model: SM-G570F Software version: 42.3 Waiting ADB device... OK Reading phone info... Model: SM-G570F Android version: 8.0.0 PDA version: G570FXXS4CTJ7 CSC version: G570FOJV4CTJ2 Phone version: G570FXXS4CTJ5 Product code: SM-G570FZDDTHR CSC country code: IRAN CSC sales code: THR Phone SN: R58J81M1FAM IMEI: 352086092584377 HW version: MP 0.500 RF cal date: 20170808 Chip name: EXYNOS7570 Modem board: SHANNON305 Security patch: 2020-10-01 Boot Warranty bit: 0 SIM State: ABSENT,READY Initialization zTool... OK Running zTool, please wait... OK Reading data from phone... error (0 5.2) Reboot phone and try again. Check ADB drivers, USB cable. Don't use USB Hubs If this repeated then reflash phone and make factory reset. Done with Samsung Tool PRO v.42.3

03-06-2021, 13:49	#2 (permalink)
Z3X Product Supporter Join Date: Feb 2008 Location: z3x Posts: 15,900 Member: 706257 Status: Offline Thanks Meter: 5,035	Hello. Currently bit4 not supported. Please wait for updates.

03-06-2021, 13:49	#3 (permalink)
Z3X Product Supporter Join Date: Feb 2008 Location: z3x Posts: 15,900 Member: 706257 Status: Offline Thanks Meter: 5,035	Hello. Currently bit4 not supported. Please wait for updates.