I9505 QCN read/write problems - GSM-Forum

asmodi · 11-30-2014, 20:11

I have a I9505 with 2g working normaly but no network in 3g i had read qcn with z3x 18.1 , 18.2 ,18.3 but always files size is 5 ko only :

Quote:

Selected model: I9505
Selected port: COM99 SAMSUNG Mobile USB Serial Port
Selected port speed: 115200
Checking phone at COM99
Detected ID: 00000FE8 (Unknown)
SW Version:
Reading ESN... OK
Backuping RFNV... OK
Backuping Feature Mask... OK
Backuping NV Item... OK
Backuping Provisioning Item Files... OK
Done with Samsung Tool v.18.2

and when i restore this qcn file or write a another qcn file drom cert and qcn post i get this error in 18.1

Quote:

Selected model: I9505
Selected port: COM99 SAMSUNG Mobile USB Serial Port
Selected port speed: 115200
Reading QCN file... OK
Checking phone at COM99
Detected ID: 00000FE8 (Unknown)
SW Version:
Exception: Access violation at address 0041D559 in module 'SamsungTool.exe'. Read of address 1109899C

and this with 18.2 and 18.3

Quote:

Selected model: I9505
Selected port: COM99 SAMSUNG Mobile USB Serial Port
Selected port speed: 115200
Reading QCN file... OK
Checking phone at COM99
Detected ID: 00000FE8 (Unknown)
SW Version:
Checking paths... error
Done with Samsung Tool v.18.2

asmodi · 12-01-2014, 15:51

No answer form supporters ???????????

**blang** · 12-09-2014, 19:21

1st - all time use only last version,
second if you want answer post all story about phone!!!!
i have seen this thread but without addition information cant answer!!!
read sticked thread what addition information need if you want answer.

from log i dont see phone firmware and other things.

post here log of read info , i will flash same firmware into my phone and will test.

+ try use 18.4 there small global changes in qcn read/write

asmodi · 12-11-2014, 17:45

I had returned phone to customer u ansewred too late ...

asmodi · 12-31-2014, 19:42

Here is another I9505 i have tryed to read qcn but readed qcn file is only 4 Ko size . firmware version is :

AP : i9505xxugng8
CP : i9505xxugng8
CSC : i9505yxzgnh2

Quote:

Selected model: I9505
Selected port: COM56 SAMSUNG Mobile USB Serial Port
Selected port speed: 115200
Checking phone at COM56
Detected ID: 00000FE8 (Unknown)
SW Version:
Reading ESN... OK
Backuping RFNV... OK
Backuping Feature Mask... OK
Backuping NV Item... OK
Backuping Provisioning Item Files... OK
Done with Samsung Tool v.18.5

matrex80 · 12-31-2014, 19:58

Must flashing device full flash and then Root

asmodi · 12-31-2014, 22:16

I flashed with 3 difrent firmware , and its rooted ...

**blang** · 12-31-2014, 22:55

Quote:

Originally Posted by asmodi

Here is another I9505 i have tryed to read qcn but readed qcn file is only 4 Ko size . firmware version is :

AP : i9505xxugng8
CP : i9505xxugng8
CSC : i9505yxzgnh2

contact with me in sonork, i will check whats wrong

**blang** · 12-31-2014, 22:56

Quote:

Originally Posted by asmodi

I flashed with 3 difrent firmware , and its rooted ...

your phone fresh or may be wiped already?

asmodi · 01-01-2015, 16:10

No i haven't wipe efs , i only need to backup and write another qcn because phone have networkd problems ..

hfreire · 01-04-2015, 04:41

Quote:

Originally Posted by asmodi

No i haven't wipe efs , i only need to backup and write another qcn because phone have networkd problems ..

i was the same problem yesterday, i fixed flashing I9505XXUFNA1-MODEM
Now working 100%.

kostik1985-05 · 05-19-2017, 16:16

Quote:

Originally Posted by asmodi

Here is another I9505 i have tryed to read qcn but readed qcn file is only 4 Ko size . firmware version is :

AP : i9505xxugng8
CP : i9505xxugng8
CSC : i9505yxzgnh2

This QCN file error flashing.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-01-2014, 15:51	#2 (permalink)
asmodi No Life Poster Join Date: Sep 2005 Posts: 1,068 Member: 183976 Status: Offline Thanks Meter: 134	No answer form supporters ???????????

12-09-2014, 19:21	#3 (permalink)
blang Product Manager Join Date: Oct 2000 Location: future Posts: 22,465 Member: 2368 Status: Offline Sonork: 100.111111 Thanks Meter: 186,838	1st - all time use only last version, second if you want answer post all story about phone!!!! i have seen this thread but without addition information cant answer!!! read sticked thread what addition information need if you want answer. from log i dont see phone firmware and other things. post here log of read info , i will flash same firmware into my phone and will test. + try use 18.4 there small global changes in qcn read/write

12-11-2014, 17:45	#4 (permalink)
asmodi No Life Poster Join Date: Sep 2005 Posts: 1,068 Member: 183976 Status: Offline Thanks Meter: 134	I had returned phone to customer u ansewred too late ...

12-31-2014, 19:58	#6 (permalink)
matrex80 Freak Poster Join Date: Mar 2005 Location: turikye geziy antip Age: 44 Posts: 246 Member: 124496 Status: Offline Thanks Meter: 19	Must flashing device full flash and then Root

12-31-2014, 22:16	#7 (permalink)
asmodi No Life Poster Join Date: Sep 2005 Posts: 1,068 Member: 183976 Status: Offline Thanks Meter: 134	I flashed with 3 difrent firmware , and its rooted ...

01-01-2015, 16:10	#10 (permalink)
asmodi No Life Poster Join Date: Sep 2005 Posts: 1,068 Member: 183976 Status: Offline Thanks Meter: 134	No i haven't wipe efs , i only need to backup and write another qcn because phone have networkd problems ..