lg d100 unlock done with z3x - GSM-Forum

gsmalgeriepro · 04-25-2015, 13:47

put phone off and press vol + and connect

Selected model is:LG D100
Using COMPORT: COM15
Analising USB Configuration...
Connect powered off MTK Device to USB cable... You have 20 seconds.
USB Serial COM Attached to system...
COM Port short name : COM0
Using COMPORT: COM15
Analising USB Configuration...
Connect powered off MTK Device to USB cable... You have 20 seconds.
USB Serial COM Attached to system...
COM Port short name : COM16
COM Port full name : LGE AndroidNet USB Serial Port
COM Port hardware id : USB\VID_1004&PID_61F1&REV_0100&MI_02
Open port COM16...
Send start CMD commands...done
Read HW_CODE...done
HW_CODE: 0x6572
Read HW_SW_VER...done
HW_SUB_CODE: 0x8A00
HW_VER: 0xCA01
SW_VER: 0x0000
GetEntryRegion...donedonefail
Send DA Agent...done
Wait DA response...done
Send storage device and external ram device config...done
Detect NAND Flash...done
Get target inforamtion...done
Booting OK
EMMC Config:
EMMC rpmb size: 512kb
EMMC boot1 size: 4096kb
EMMC boot2 size: 4096kb
EMMC user area size: 3728 Mb
Read logical partitions info...done
Totally detected partitions: 32
Searching security blocks...ok
Reading Security...done
IMEI A: 35580306123581
IMEI B: 35030526000000
Bluetooth address:0C4885124EB1
Wi-Fi MAC address:0C4885A80912
NCK: 1602639607405199
NSCK: 8976457073350961
SPCK: 7996564919556224
CCK: 4808151027936580
SIM: 0260947731589159
HCK: 0000000000000000
Backup are saved into Backups\Backup__35580306123581_SEC.BIN
done
Read Info OK

gsmfriend · 04-27-2015, 11:09

hi bro

I connect the phone like that

- battery in phone
- vol(+) pressed
- then connect usb cable

the pc recognize lg modem port and lg serial ports but can't connect.

please help with guide and screenshots if possible

thnaks.

gsmfriend · 04-28-2015, 15:21

no chance ,I try everything

gsmfriend · 04-29-2015, 09:14

noone can help

thanks phone return to custumer. !!!!!!!!!!!!!!!

Expertcell · 05-05-2015, 05:06

no way to load flash with original flash or readed , always error : external exception EEFFACE , any way to flash this phone?

noure30 · 06-02-2015, 14:37

LG D100 Support: Find Manuals & Warranty Info | LG UK

aziahmed · 06-02-2015, 16:00

..

gsmfriend · 11-24-2015, 21:08

hello,

My SOLUTION IS : USING LG CABLE WITH 130K ohm Resistor TESTED MANY TIMES

WITH NORMAL USB CABLE NOT WORKING FOR ME

samirh127 · 07-06-2016, 20:07

How to enter code for LG L20, D100, D100G:

1. Insert the sim card which works out your phone
2. Enter 2945#*XXX# where xxx is the model of LG phone numbers, for example, for KU990 enter 2945#*990#, GT540 enter 2945#*540#, or 2945#*71001#
3. when secret MENU window appears, select NETWORK
4. If phone ask for:
-network lock - please enter NCK code
-service provider lock - please enter SPCK code.
5. the phone is unlocked

04-25-2015, 13:47	#1 (permalink)
gsmalgeriepro Freak Poster Join Date: Dec 2013 Posts: 237 Member: 2091956 Status: Offline Thanks Meter: 9	lg d100 unlock done with z3x put phone off and press vol + and connect Selected model is:LG D100 Using COMPORT: COM15 Analising USB Configuration... Connect powered off MTK Device to USB cable... You have 20 seconds. USB Serial COM Attached to system... COM Port short name : COM0 Using COMPORT: COM15 Analising USB Configuration... Connect powered off MTK Device to USB cable... You have 20 seconds. USB Serial COM Attached to system... COM Port short name : COM16 COM Port full name : LGE AndroidNet USB Serial Port COM Port hardware id : USB\VID_1004&PID_61F1&REV_0100&MI_02 Open port COM16... Send start CMD commands...done Read HW_CODE...done HW_CODE: 0x6572 Read HW_SW_VER...done HW_SUB_CODE: 0x8A00 HW_VER: 0xCA01 SW_VER: 0x0000 GetEntryRegion...donedonefail Send DA Agent...done Wait DA response...done Send storage device and external ram device config...done Detect NAND Flash...done Get target inforamtion...done Booting OK EMMC Config: EMMC rpmb size: 512kb EMMC boot1 size: 4096kb EMMC boot2 size: 4096kb EMMC user area size: 3728 Mb Read logical partitions info...done Totally detected partitions: 32 Searching security blocks...ok Reading Security...done IMEI A: 35580306123581 IMEI B: 35030526000000 Bluetooth address:0C4885124EB1 Wi-Fi MAC address:0C4885A80912 NCK: 1602639607405199 NSCK: 8976457073350961 SPCK: 7996564919556224 CCK: 4808151027936580 SIM: 0260947731589159 HCK: 0000000000000000 Backup are saved into Backups\Backup__35580306123581_SEC.BIN done Read Info OK

04-27-2015, 11:09	#2 (permalink)
gsmfriend Registered User Join Date: Aug 2003 Location: ALGERIA ,DZ Posts: 825 Member: 37521 Status: Offline Thanks Meter: 50	hi bro I connect the phone like that - battery in phone - vol(+) pressed - then connect usb cable the pc recognize lg modem port and lg serial ports but can't connect. please help with guide and screenshots if possible thnaks.

04-28-2015, 15:21	#3 (permalink)
gsmfriend Registered User Join Date: Aug 2003 Location: ALGERIA ,DZ Posts: 825 Member: 37521 Status: Offline Thanks Meter: 50	no chance ,I try everything

04-29-2015, 09:14	#4 (permalink)
gsmfriend Registered User Join Date: Aug 2003 Location: ALGERIA ,DZ Posts: 825 Member: 37521 Status: Offline Thanks Meter: 50	noone can help thanks phone return to custumer. !!!!!!!!!!!!!!!

05-05-2015, 05:06	#5 (permalink)
Expertcell No Life Poster Join Date: Aug 2005 Location: All Americas Age: 44 Posts: 790 Member: 168246 Status: Offline Sonork: 100.110734 Thanks Meter: 79	no way to load flash with original flash or readed , always error : external exception EEFFACE , any way to flash this phone?

06-02-2015, 14:37	#6 (permalink)
noure30 No Life Poster Join Date: Apr 2006 Location: Tunisia Posts: 2,699 Member: 261437 Status: Offline Sonork: no Thanks Meter: 922	LG D100 Support: Find Manuals & Warranty Info \| LG UK

06-02-2015, 16:00	#7 (permalink)
aziahmed No Life Poster Join Date: Jan 2011 Location: algeria Posts: 939 Member: 1503017 Status: Offline Thanks Meter: 447	..

11-24-2015, 21:08	#8 (permalink)
gsmfriend Registered User Join Date: Aug 2003 Location: ALGERIA ,DZ Posts: 825 Member: 37521 Status: Offline Thanks Meter: 50	hello, My SOLUTION IS : USING LG CABLE WITH 130K ohm Resistor TESTED MANY TIMES WITH NORMAL USB CABLE NOT WORKING FOR ME

07-06-2016, 20:07	#9 (permalink)
samirh127 Freak Poster Join Date: Jan 2014 Posts: 211 Member: 2102145 Status: Offline Thanks Meter: 10	How to enter code for LG L20, D100, D100G: 1. Insert the sim card which works out your phone 2. Enter 2945#XXX# where xxx is the model of LG phone numbers, for example, for KU990 enter 2945#990#, GT540 enter 2945#540#, or 2945#71001# 3. when secret MENU window appears, select NETWORK 4. If phone ask for: -network lock - please enter NCK code -service provider lock - please enter SPCK code. 5. the phone is unlocked