Post here successfully job with Z3X-BOX Samsung (2010-2018)

[chipscell25]

Operation: Read Codes via Server
Selected model: SM-G930A
Software version: 33.2

Checking Login and Password... OK
Ballance: 25 crd.
You have 25 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SAMSUNG-SM-G930A
Android version: 8.0.0
PDA version: G930AUCU4CRE4
CSC version: G930AATT4CRE4
Phone version: G930AUCU4CRE4
Product code: SM-G930AZKAATT
CSC country code: USA
CSC sales code: ATT
Phone SN: R38H30P80VN
IMEI: 35742xxxxxxxxxx
HW version: REV0.6
RF cal date: 2016.03.20
Chip name: MSM8996
Modem board: MSM8996
Security patch: 2018-04-01
Boot Warranty bit: 0
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Searching Ramdump interface... COM9 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 15060526
NET lock: 26496142
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.33.2

[MONDE-GSM]

LG 2-3G Tool v9.49
supported models: 1556

Mode: Normal
Model: MF180
Build version: Oct 22 201011:55:12Sep 13 201017:00:00MF180
SW Version: M6246A-KPRZL-2.2.0095T
IMEI: 35529104606662-3
BlueTooth Address: 0D:47:4D:7E:BB:01
Phone Code: default
Elapsed: 2 secs. --> (v9.49)

Phone mode is NORMAL
Switch to DOWNLOAD mode
Phone detected!
Start new sprint unlock...
Laf cmd info: send LAF_CMD_HELLO, retry #1
Laf cmd info: send LAF_CMD_HELLO, retry #2
Laf cmd info: send LAF_CMD_HELLO, retry #3
Laf cmd error: LAF_CMD_HELLO could not write.
Elapsed: 50 secs. --> (v9.49)

Mode: Normal
Model: MF180
Build version: Oct 22 201011:55:12Sep 13 201017:00:00MF180
SW Version: M6246A-KPRZL-2.2.0095T
IMEI: 35529104606662-3
BlueTooth Address: 00:01:00:7E:BB:01
Phone Code: default
Elapsed: 1 secs. --> (v9.49)

Phone mode is NORMAL
Switch to DOWNLOAD mode
Phone detected!
Start new sprint unlock...
Laf cmd info: send LAF_CMD_HELLO, retry #1
Laf cmd info: send LAF_CMD_HELLO, retry #2
Laf cmd info: send LAF_CMD_HELLO, retry #3
Laf cmd error: LAF_CMD_HELLO could not write.
Elapsed: 46 secs. --> (v9.49)

Mode: Emergency
Model: LS991
Read info...
Laf Protocol: 01000001
Model name: LGLS991
Software verion: LS991ZVE
Android verion: 6.0
Target operator: SPR
Target country: US
Chipset: msm8992
IMEI: 357355062097966
Elapsed: 5 secs. --> (v9.49)

Phone mode is DOWNLOAD
Start new sprint unlock...
Laf Protocol: 01000001
Model name: LGLS991
Software verion: LS991ZVE
Android verion: 6.0
Target operator: SPR
Target country: US
Chipset: msm8992
IMEI: 357355062097966
Init EXT4 /system ... done
Detecting sprint type ... using old write method... done
Unlocking...
Init EXT4 /carrier ... done done
Unlock done!
Elapsed: 99 secs. --> (v9.49)

[chipscell25]

Operation: Unlock
Selected model: SM-G925P
Software version: 33.2

Waiting ADB device... OK
Reading phone info...
Model: SM-G925P
Android version: 7.0
PDA version: G925PVPS4DQH1
CSC version: G925PSPT4DQH1
Phone version: G925PVPS4DQH1
Product code: Not Active
CSC country code: USA
CSC sales code: SPR
Phone SN: 00000000000
IMEI: 990xxxxxxxxxxxx
HW version: G925P.02
RF cal date: 2015.06.15
Chip name: EXYNOS7420
Modem board: MDM9635M
Security patch: 2017-08-01
Boot Warranty bit: 1
Writing AT RIL... OK
Initialization AT RIL... root required
Checking Super user right... true
Initialization AT RIL... OK
Unlocking... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.33.2

[EjazATF]

SM-G925A
AT&T Unlocked / Read Code Success

Operation: Read Codes
Selected model: SM-G925A
Selected port: COM520 Z3X BOX Serial Port
Software version: 33.2

Searching Samsung modem... detected COM64
Reading phone info...
Model: SM-G925A
AP version: G925AUCS4CPG1
CSC version: G925AATT4CPG1
CP version: G925AUCU5API1
Product code: SM-G925AZWAATT
Phone SN: R38G60R4JCE
IMEI: 357942xxxxxxx
Unique number: 0615__________824
Reading IMEI... OK
IMEI: 357942xxxxxxx (SIGN: OK)
Please wait, generating hash codes file, this can take few minutes... OK
Reading data from phone... OK
HWID:  88 59 B7 0E E5 07 00 00 00 00 00 00 00 00 00 00
Modem board: SHANNON333
Please wait, calculating codes... OK (time - 00:00:13)
Freeze code: 18160268
NET lock: 36309036
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.33.2

[chipscell25]

FRP J727T1 USING J700M

USING TALKBACK

QuickShortcutMaker APK

OPEN CALCULATOR writes this command (+30012012732+
. DRParser Mode will open, we put * # 0808 #, select DM + MODEM + ADB. to enable ABD

Operation: Reset FRP
Selected model: SM-J700M
Software version: 33.2

You must activate ADB before reset FRP Yes
Goto 'Terms and conditions' press 'NEXT' and 'AGREE' EULA Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-J727T1
Android version: 7.0
PDA version: J727T1UVU1AQG1
CSC version: J727T1TMK1AQG1
Phone version: J727T1UVU1AQG1
Product code: SM2J727TZDATMK
CSC country code: USA
CSC sales code: TMK
Phone SN: R28JA1P31PY
IMEI: 3556xxxxxxxxxx
HW version: REV0.7
RF cal date: 20171019
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2017-07-01
Boot Warranty bit: 0
Incorrect model selected. This may damage your phone. Continue? Yes
Bypass FRP... OK
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'
Done with Samsung Tool PRO v.33.2

[chipscell25]

Operation: Read Codes DIAG
Selected model: SM-J120AZ
Software version: 33.2

Checking hash file... OK
Searching Samsung modem... detected COM70
Reading phone info...
Model: SM-J120AZ
AP version: J120AZTUU3AQH2
CSC version: J120AZAIO3AQH2
CP version: J120AZTUU3AQH2
Product code: SM2J120AZKZAIO
Phone SN: R58J3683YRV
IMEI: 3569xxxxxxxxxxx
Unique number: CFN00F43C4EF414
Searching Samsung diag port... detected COM69
Reading phone info... OK
CP version: J120AZTUU3AQH2
CP build: Aug 8 2017 14:02:18
Reading data from phone... OK
Reading NV data... OK
Modem board: SHANNON308
Checking NV data... OK
Calculating... OK
Please wait, calculating codes... OK (time - 00:00:05)
Freeze code: 04057392
NET lock: 46359752
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#
Done with Samsung Tool PRO v.33.2

[chipscell25]

UNLOCK J727T1 DONE AFTER ERROR IN J727T1UVS3ARE1

TO UNLOCK only CP_J727TUVU3ARA1.tar

Operation: Unlock
Selected model: SM-J727T1
Software version: 33.2

Checking Login and Password... OK
Ballance: 20 crd.
You have 20 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-J727T1
Android version: 7.0
PDA version: J727T1UVS3ARE1
CSC version: J727T1TMK3ARE1
Phone version: J727TUVU3ARA1
Product code: SM2J727TZKETMK
CSC country code: USA
CSC sales code: TMK
Phone SN: R28K425E55J
IMEI: 35425XXXXXXXXXX
HW version: REV0.7
RF cal date: 20180420
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2018-05-01
Boot Warranty bit: 0
Searching Samsung diag port... detected COM71
Reading phone info... OK
CP version: J727TUVU3ARA1
CP build: Jan 24 2018 13:02:34
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Waiting ADB device... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.33.2

[chipscell25]

Operation: Unlock
Selected model: SGH-M919
Selected port: COM77 SAMSUNG Mobile USB Serial Port
Software version: 33.2

Reading phone info...
Reading IMEI... OK
IMEI: 3590xxxxxxxxxxx
Unlocking... OK
Reseting... OK
Unlock done
Done with Samsung Tool PRO v.33.2

[lizandropc]

FRP G530T

You must activate ADB before reset FRP Yes
Goto 'Terms and conditions' press 'NEXT' and 'AGREE' EULA Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G530T1
Android version: 5.1.1
PDA version: G530T1UVU2AQD1
CSC version:
Phone version: G530T1UVU2AQD1
Product code: SM2G530TZAATMB
CSC country code: USA
CSC sales code: TMB
Phone SN: R28GC1G5LHB
IMEI:
HW version: REV0.1
RF cal date: 2015.12.10
Chip name: MSM8916
Modem board: MSM8916
Security patch: 2017-01-01
Boot Warranty bit: 0
Incorrect model selected. This may damage your phone. Continue? Yes
Bypass FRP... OK
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'

Done with Samsung Tool PRO v.33.2

[djj007]

Operation: Reset FRP/React/EE
Selected model: SM-J210F
Software version: 33.2

Searching Samsung USB Flash interface... COM61 detected
Setup connection... OK
Reading PIT from phone... OK
Searching FRP lock... OK
Erasing FRP lock... OK
Reset done
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'

Done with Samsung Tool PRO v.33.2

[HassanMahainiy]

Checking Login and Password... OK
Ballance: 300 crd.
You have 300 credit(s) left. This operation takes 10 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G960F
Android version: 8.0.0
PDA version: G960FXXU1BRE5
CSC version: G960FCKH1BRE1
Phone version: G960FXXU1BRE3
Product code: SM-G960FZBDHTS
CSC country code: Sweden
CSC sales code: HTS
Phone SN: R58K3347GSE
IMEI: 357171091585***
HW version: MP 0.900
RF cal date: 20180313
Chip name: EXYNOS9810
Modem board: SHANNON360
Security patch: 2018-05-01
Boot Warranty bit: 0
Searching server... OK
Checking server answer... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Executing... OK
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 06317315
NET lock: 50714684
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#
Done with Samsung Tool PRO v.33.2

[Yusuf Lawal]

SAMSUNG G532F READ CODE DONE

UNLOCK INSTRUCTIONS:
Direct unlock:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock' button and select 'New Unlock' for direct unlock.

To read security codes (without root permissions):
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read codes' button to read security codes.

To reset Google account activation lock:
1. ADB must be activated in any way (you can flash sBoot from combination firmware,
make sure, that you are not upgrade sBoot).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Select device in ADB settings.
4. Press 'Reset FRP' and follow the instructions in program.
5. When process done, press 'Back' on phone and perform factory reset from phone settings.

Operation: Read Codes
Selected model: SM-G532F
Software version: 33.2

Checking hash file... OK
Waiting ADB device... OK
Reading phone info...
Model: SM-G532F
Android version: 6.0.1
PDA version: G532FXWU1ARE1
CSC version: G532FOJV1ARE1
Phone version: G532FXXU1ARB1
Product code: SM-G532FZKDMID
CSC country code: Iraq
CSC sales code: MID
Phone SN: R58J20KED7R
IMEI: 357063084183943
HW version: MP 0.300
RF cal date: 20170203
Chip name: MT6737T
Modem board: MT6737T
Security patch: 2018-05-01
Boot Warranty bit: 0
Rebooting phone... OK
Waiting ADB device... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Searching Ramdump interface... COM32 detected
Reading data from phone... OK
Please wait, calculating codes... OK (time - 00:01:01)
Freeze code: 41829392
NET lock: 00000000
SUB lock: 00000000
SP lock: 00000000
CP lock: 96160285
SIM lock: --------
For check lock status: *#7465625#

Done with Samsung Tool PRO v.33.2

[chipscell25]

Operation: Unlock
Selected model: SM-G610M
Software version: 33.2

Waiting ADB device... OK
Reading phone info...
Model: SM-G610M
Android version: 6.0.1
PDA version: G610MUBU1AQG2
CSC version: G610MUWE1AQG2
Phone version: G610MUBU1AQG2
Product code: SM-G610MZKADOR
CSC country code: DOMINICAN REPUBLIC
CSC sales code: DOR
Phone SN: R58J62K8ERT
IMEI: 3577xxxxxxxxxxx
HW version: MP 0.100
RF cal date: 20170612
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2017-07-01
Boot Warranty bit: 1
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Reading data... OK
Detecting MODEM... OK
Reading MODEM... OK
Calculating... OK
Initialization data... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Writing zTool... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data... OK
HWID: F6 04 00 00 00 00 00 00 00 00 00 00 25 52 EC 39
Calculating... OK
Unlocking... OK
Writing NV data... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.33.2

[mr.luckytarun]

GT-S7560M Unlock Done

[tharakax1]

Waiting ADB device... OK
Reading phone info...
Model: SM-J701F
Android version: 7.0
PDA version: J701FXXU3ARB1
CSC version: J701FOJV3ARB1
Phone version: J701FXXU3ARA3
Product code: SM-J701FZDYKSA
CSC country code: KSA
CSC sales code: KSA
Phone SN: RF8K50BWRJM
IMEI: 356221092474677
HW version: MP 0.400
RF cal date: 20180504
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2018-02-01
Boot Warranty bit: 1
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Reading data... OK
Detecting MODEM... OK
Reading MODEM... OK
Calculating... OK
Initialization data... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Writing zTool... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data... OK
HWID: FD 2A 92 32 65 51 A5 5A DC D7 6F 59 DA D0 F8 75
Calculating... OK
Unlocking... OK
Writing NV data... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.31.5.1