Post here successfully job with Z3X-BOX Samsung (2010-2018) - Page 1058 - GSM-Forum

imrankhaliq · 03-20-2016, 09:17

REPAIR INSTRUCTIONS:
1. Fill values, what you need to repair.
2. Press 'Repair' button.
3. Connect phone in flash mode:
- (Disconnect battery and connect USB cable, insert battery after
connecting.)
- (Or disconnect battery, press vol.down and connect USB cable, insert
battery after connecting).
4. When you see 'Rebooting phone' message in log and your phone is not
restarting automatically,
then you must restart it manually and wait till process will finished.

Operation: Repair
Selected model: GT-C3312
Selected port: Auto, 921600
Software version: 24.7

Connect phone in flash mode
Waiting phone... OK
Sending preloader... OK
Sending loader... OK
Checking Flash ID... OK
Detected Flash ID: 003000EC
Reading security... OK
Patching firmware block... OK
Erase Flash... OK
Writing security... OK
Rebooting phone... OK
If phone not powered ON - turn ON phone
Searching Samsung modem... detected COM67
Reading phone info...
Model:
Country code:
Factory SW:
Unique number:
Memory phone:
Software version: C3312DXLD1/C3312OLALD1
IMEI: 00000000000000
Reading Phone S/N... OK
Phone S/N: 0000000000
Bypass MSL... OK
Repairing IMEI... OK
Repairing Slave IMEI... OK
Repair done
Done with Samsung Tool PRO v.24.7

Dilip_Nath · 03-20-2016, 12:21

anjanbonik · 03-20-2016, 13:33

Sm-J110g unlock one by Z3X pro

raselsarker · 03-20-2016, 14:59

galaxy s6 edge G925F marshmallow 6.0.1 imei repair done with z3x tested by me.sorry i forget copy z3x log.

Gambitv01 · 03-20-2016, 15:40

Operation: Unlock
Selected model: SM-G920A
Software version: 24.7

Waiting ADB device... OK
Reading phone info...
Model: SAMSUNG-SM-G920A
Android version: 5.1.1
Product code: SM2G920AZKEATT
Phone version: G920AUCU3BOJ9
PDA version: G920AUCU3BOJ9
CSC version: G920AATT3BOJ9
CSC country code: USA
CSC sales code: ATT
HW version: REV1.0
Phone S/N: R38G40M8CPF
Modem board: SHANNON333
RF cal date: 20150417
IMEI:
Checking Super user right... true
Initialization AT RIL... OK
Check version... OK
Initializating zTool... OK
Running zTool, please wait... OK
Reading nv data... OK
Checking NV data... OK
Calculating... OK
Writing nv data... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.24.7

M_ALEX · 03-20-2016, 21:22

Hello

Today I try repair imei on firmware with android v.6.0.1 but always get error(2)
after downgrade to android v.5.1.1 repair sucsesed:

Operation: Repair
Selected model: SM-G920F
Software version: 24.8

Waiting ADB device... OK
Reading phone info...
Model: SM-G920F
Android version: 5.1.1
Product code: SM-G920FZKATPH
Phone version: G920FXXU3COI9
PDA version: G920FXXU3COI9
CSC version: G920FOXX3COI6
CSC country code: portugal
CSC sales code: TPH
HW version: MP 0.910
Phone S/N: RF8GB......
Modem board: SHANNON333
RF cal date: 20151116
IMEI:
Checking Super user right... true
Initialization AT RIL... OK
Check version... OK
Initializating zTool... OK
Running zTool, please wait... OK
Reading nv data... OK
Checking NV data... OK
Calculating... OK
Writing nv data... OK
Rebooting phone... OK
Repair done

Done with Samsung Tool PRO v.24.8

Regard

M_ALEX

kiki49 · 03-20-2016, 22:23

Operation: Flash
Selected model: SM-G920T
Software version: 24.8

File analysis... OK
Total file size: 0xD8B84F60 (3467

Mb)
Searching USB Flash Interface...

detected COM62
Setup connection... OK
Reading PIT from phone... OK
Sending sboot.bin... OK
Sending cm.bin... OK
Sending boot.img... OK
Sending recovery.img... OK
Sending system.img... OK
Sending cache.img... OK
Sending modem.bin... OK
Flashing done (time - 00:09:16)

Done with Samsung Tool PRO

v.24.8

deeptamu · 03-21-2016, 08:08

j700f unlock secuty damage 2 solution helps

UNLOCK INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options' for Android 4.0 - 4.1.2 or
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options' in Android 4.2+.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock' button for direct unlock.

To reset Google account activation or Samsung reactivation lock:
1. Power on phone in download mode (turn off phone, press vol.down + home + power).
2. Connect phone to PC with USB cable, install drivers if needed.
3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
(Sometimes needs to perform 'wipe data/factory reset' once more, to complete this locks removal.)

Operation: Unlock
Selected model: SM-J700F/DS
Software version: 24.8

Waiting ADB device... OK
Reading phone info...
Model: SM-J700F
Android version: 5.1.1
Product code: SM-J700FZDDXME
Phone version: J700FXXU1AOL2
PDA version: J700FXXU1AOL1
CSC version: J700FOLB1AOL1
CSC country code: MALAYSIA
CSC sales code: XME
HW version: MP 0.701
Phone S/N: R28H148J49J
Modem board: SHANNON310
RF cal date: 20160129
IMEI:
Checking Super user right... true
Initializating zTool... OK
Running zTool, please wait...
Start... OK
Init... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data... OK
Reading nv data... OK
Checking NV data... error
Security damaged (2)

Done with Samsung Tool PRO v.24.8

deeptamu · 03-21-2016, 08:29

[QUOTE=deeptamu;11707577]j700f unlock secuty damage 2 solution helps

unlock done v23.9 pro tools z3x

UzUnlocker · 03-21-2016, 10:59

G350E Dual sim IMEI 00000000 Repair done

Repair imei

Code:

Waiting ADB device... OK
Reading phone info...
Model: SM-G350E
Android version: 4.4.2
Product code: Unknown
Phone version: G350EXXU0ANH1
PDA version: G350EXXU0ANH2
CSC version: G350EOXE0ANH1
CSC country code: Russia
CSC sales code: SER
HW version: Unknown1
Phone S/N: 
Modem board: SC6815AS
RF cal date: Unknown
IMEI: 
Checking Super user right... true
Checking MSL... OK
Initialization AT RIL... OK
Bypass MSL... OK
Repairing IMEI... OK
Repairing Slave IMEI... OK
Rebooting phone... OK
Repair done

Patch CERT

Code:

Modem board: SC6815AS
RF cal date: Unknown
IMEI: 3566470675*******
Checking Super user right... true
Patching CERT check... OK
Rebooting phone... OK
Patching CERT check... done

ru.mobile · 03-21-2016, 12:21

USB cable:
1. Phone must be powered on.
2. Type *#7284# and choose phone USB.
3. Reboot phone.
4. Connect USB cable, install drivers if needed.
5. Select diagnostic port in port settings.
6. Press 'Unlock' button for direct unlock or 'Read codes' to read security codes.

Operation: Unlock
Selected model: GT-I8260
Selected port: COM81 SAMSUNG Mobile USB Serial Port
Software version: 24.8

Reading phone info... OK
Model: GT-I8260
Country code: ŞU
Cal date: ŞU
Factory SW: I8260XXAMF2
Unique number: CL708041A8460B0
Memory phone: ŞU
Phone S/N: RF1DB86BTK
PDA/CSC version: I8260XXAMF2/I8260OXXAMG2
Phone version: SW VERSION :None
Phone HW: MP 0.801
Cal date: 2013.11.29
Reading IMEI... OK
IMEI: 359826053257395
Bypass MSL... OK
Unlocking... OK
Reseting... OK
Unlock done

Done with Samsung Tool PRO v.24.8

manpreetmani · 03-21-2016, 15:24

Selected model: GT-C3312R
Selected port: Auto, 921600
Software version: 24.8

Connect phone in flash mode
Waiting phone... OK
Sending preloader... OK
Sending loader... OK
Checking Flash ID... OK
Detected Flash ID: 003000EC
Reading security... OK
Patching firmware block... OK
Erase Flash... OK
Writing security... OK
Rebooting phone... OK
If phone not powered ON - turn ON phone
Searching Samsung modem... detected COM17
Reading phone info...
Model:
Country code:
Factory SW:
Unique number:
Memory phone:
Software version: C3312RXXMB4/C3312ROXEMK2
IMEI: 3557760
Reading Phone S/N... OK
Phone S/N: RZ1D30863Q
Bypass MSL... OK
Unlocking... OK

Done with Samsung Tool PRO v.24.8

ghacks · 03-21-2016, 16:20

SGH-T889 unlcok done by 24.8

UNLOCK INSTRUCTIONS:
Micro-USB cable:
1. Phone must be powered on.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Type *#9090# and choose USB (or 'DM/DUN over HSIC').
4. Reboot phone.
5. Connect USB cable, install drivers if needed.
6. Select Samsung diagnostic port in port settings.
7. Press 'Unlock' button for direct unlock.

Operation: Unlock
Selected model: SGH-T889
Selected port: COM86 SAMSUNG Mobile USB Serial Port
Software version: 24.8

Reading phone info...
Reading IMEI... OK
IMEI: 354340051835777
Unlocking... OK
Reseting... OK
Unlock done

Done with Samsung Tool PRO v.24.8

anis_rainbow · 03-21-2016, 17:02

SHV-E250L flashing done

Operation: Flash
Selected model: SHV-E250L
Software version: 24.8

File analysis... OK
Total file size: 0x8101C428 (2064 Mb)
Searching USB Flash Interface... detected COM15
Setup connection... OK
Reading PIT from phone... OK
Sending sboot.bin... OK
Sending tz.img... OK
Sending boot.img... OK
Sending recovery.img... OK
Sending system.img... OK
Sending cache.img... OK
Sending hidden.img... OK
Sending modem.bin... OK
Flashing done (time - 00:09:26)

Done with Samsung Tool PRO v.24.8

Gambitv01 · 03-21-2016, 17:57

Operation: Reset MSL
Selected model: SM-G900T
Selected port: COM22 SAMSUNG Mobile USB Serial Port
Software version: 24.8

Reading phone info...
Reading IMEI... OK
IMEI: 353300060478549
Reseting MSL security... OK
Reseting... OK
Reset MSL done

Done with Samsung Tool PRO v.24.8

Operation: Write CERT
Selected model: SM-G900T
Selected port: COM22 SAMSUNG Mobile USB Serial Port
Software version: 24.8

Checking certificate file... OK
KEY ID: 0478
Waiting ADB device...
Please, allow USB debugging on phone... OK
Reading phone info...
Model: SM-G900T
Android version: 5.1.1
Product code: SM-G900TZWATMB
Phone version: G900TUVS1FOL1
PDA version: G900TUVS1FOL1
CSC version: G900TTMB1FOL1
CSC country code: USA
CSC sales code: TMB
HW version: REV1.0
Phone S/N: RV8F311359A
Modem board: MSM8974PRO
RF cal date: 2015.06.12
IMEI:
Initialization AT RIL... OK
Bypass MSL... OK
Checking for compatible phone and cert... OK
Phone KEY ID: 0478
Writing CERT... OK
Checking CERT status... OK
Rebooting phone... OK

Done with Samsung Tool PRO v.24.8

Operation: Unlock
Selected model: SM-G900T
Selected port: COM22 SAMSUNG Mobile USB Serial Port
Software version: 24.8

Reading phone info...
Reading IMEI... OK
IMEI: 352558064833271
Unlocking... OK
Reseting... OK
Unlock done

Done with Samsung Tool PRO v.24.8

03-20-2016, 09:17	#15856 (permalink)
imrankhaliq Freak Poster Join Date: Nov 2013 Location: Deira, Dubai Posts: 227 Member: 2062071 Status: Offline Sonork: 100.1663486 Thanks Meter: 60	Samsung C3312 Imei Restor Problem solved 1000% REPAIR INSTRUCTIONS: 1. Fill values, what you need to repair. 2. Press 'Repair' button. 3. Connect phone in flash mode: - (Disconnect battery and connect USB cable, insert battery after connecting.) - (Or disconnect battery, press vol.down and connect USB cable, insert battery after connecting). 4. When you see 'Rebooting phone' message in log and your phone is not restarting automatically, then you must restart it manually and wait till process will finished. Operation: Repair Selected model: GT-C3312 Selected port: Auto, 921600 Software version: 24.7 Connect phone in flash mode Waiting phone... OK Sending preloader... OK Sending loader... OK Checking Flash ID... OK Detected Flash ID: 003000EC Reading security... OK Patching firmware block... OK Erase Flash... OK Writing security... OK Rebooting phone... OK If phone not powered ON - turn ON phone Searching Samsung modem... detected COM67 Reading phone info... Model: Country code: Factory SW: Unique number: Memory phone: Software version: C3312DXLD1/C3312OLALD1 IMEI: 00000000000000 Reading Phone S/N... OK Phone S/N: 0000000000 Bypass MSL... OK Repairing IMEI... OK Repairing Slave IMEI... OK Repair done Done with Samsung Tool PRO v.24.7

03-20-2016, 12:21	#15857 (permalink)
Dilip_Nath No Life Poster Join Date: Nov 2006 Location: Bangladesh Posts: 1,377 Member: 387110 Status: Offline Sonork: Not Use Thanks Meter: 630	SGH-T189N Unlock Done

03-20-2016, 14:59	#15859 (permalink)
raselsarker Freak Poster Join Date: Feb 2009 Location: dhaka,uttara Posts: 188 Member: 962829 Status: Offline Thanks Meter: 51	galaxy s6 edge G925F marshmallow 6.0.1 imei repair done with z3x tested by me.sorry i forget copy z3x log. Last edited by raselsarker; 03-20-2016 at 15:06.

03-20-2016, 21:22	#15861 (permalink)
M_ALEX Freak Poster Join Date: Nov 2002 Location: Poland Age: 56 Posts: 144 Member: 17920 Status: Offline Thanks Meter: 10	Repair Imei on G620F Hello Today I try repair imei on firmware with android v.6.0.1 but always get error(2) after downgrade to android v.5.1.1 repair sucsesed: Operation: Repair Selected model: SM-G920F Software version: 24.8 Waiting ADB device... OK Reading phone info... Model: SM-G920F Android version: 5.1.1 Product code: SM-G920FZKATPH Phone version: G920FXXU3COI9 PDA version: G920FXXU3COI9 CSC version: G920FOXX3COI6 CSC country code: portugal CSC sales code: TPH HW version: MP 0.910 Phone S/N: RF8GB...... Modem board: SHANNON333 RF cal date: 20151116 IMEI: Checking Super user right... true Initialization AT RIL... OK Check version... OK Initializating zTool... OK Running zTool, please wait... OK Reading nv data... OK Checking NV data... OK Calculating... OK Writing nv data... OK Rebooting phone... OK Repair done Done with Samsung Tool PRO v.24.8 Regard M_ALEX

03-21-2016, 08:08	#15863 (permalink)
deeptamu Freak Poster Join Date: Aug 2011 Location: nepal Posts: 252 Member: 1635479 Status: Offline Thanks Meter: 122	j700f nv data error security damage helps>????????? j700f unlock secuty damage 2 solution helps UNLOCK INSTRUCTIONS: Phone must be rooted! If the software can't root the phone automatically, then you must root your device manually. 1. Power on the phone. 2. Enable 'USB debugging' in 'Settings'-'Developer options' for Android 4.0 - 4.1.2 or tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options' in Android 4.2+. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Press 'Unlock' button for direct unlock. To reset Google account activation or Samsung reactivation lock: 1. Power on phone in download mode (turn off phone, press vol.down + home + power). 2. Connect phone to PC with USB cable, install drivers if needed. 3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock. (Sometimes needs to perform 'wipe data/factory reset' once more, to complete this locks removal.) Operation: Unlock Selected model: SM-J700F/DS Software version: 24.8 Waiting ADB device... OK Reading phone info... Model: SM-J700F Android version: 5.1.1 Product code: SM-J700FZDDXME Phone version: J700FXXU1AOL2 PDA version: J700FXXU1AOL1 CSC version: J700FOLB1AOL1 CSC country code: MALAYSIA CSC sales code: XME HW version: MP 0.701 Phone S/N: R28H148J49J Modem board: SHANNON310 RF cal date: 20160129 IMEI: Checking Super user right... true Initializating zTool... OK Running zTool, please wait... Start... OK Init... OK Generate and check client proof... OK Verify proof by client... OK Reading data... OK Reading nv data... OK Checking NV data... error Security damaged (2) Done with Samsung Tool PRO v.24.8

03-20-2016, 13:33	#15858 (permalink)
anjanbonik No Life Poster Join Date: Aug 2007 Location: BANGLADESH Posts: 617 Member: 571956 Status: Offline Thanks Meter: 496	*Sm-J110g unlock one by Z3X pro*

03-20-2016, 15:40	#15860 (permalink)
Gambitv01 No Life Poster Join Date: Dec 2010 Location: Romania Posts: 1,532 Member: 1475064 Status: Offline Thanks Meter: 347	Operation: Unlock Selected model: SM-G920A Software version: 24.7 Waiting ADB device... OK Reading phone info... Model: SAMSUNG-SM-G920A Android version: 5.1.1 Product code: SM2G920AZKEATT Phone version: G920AUCU3BOJ9 PDA version: G920AUCU3BOJ9 CSC version: G920AATT3BOJ9 CSC country code: USA CSC sales code: ATT HW version: REV1.0 Phone S/N: R38G40M8CPF Modem board: SHANNON333 RF cal date: 20150417 IMEI: Checking Super user right... true Initialization AT RIL... OK Check version... OK Initializating zTool... OK Running zTool, please wait... OK Reading nv data... OK Checking NV data... OK Calculating... OK Writing nv data... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.24.7

03-20-2016, 22:23	#15862 (permalink)
kiki49 No Life Poster Join Date: Sep 2010 Location: Gsm-Djibouti Posts: 637 Member: 1406357 Status: Offline Sonork: 100.1654421 Thanks Meter: 45	Operation: Flash Selected model: SM-G920T Software version: 24.8 File analysis... OK Total file size: 0xD8B84F60 (3467 Mb) Searching USB Flash Interface... detected COM62 Setup connection... OK Reading PIT from phone... OK Sending sboot.bin... OK Sending cm.bin... OK Sending boot.img... OK Sending recovery.img... OK Sending system.img... OK Sending cache.img... OK Sending modem.bin... OK Flashing done (time - 00:09:16) Done with Samsung Tool PRO v.24.8

03-21-2016, 08:29	#15864 (permalink)
deeptamu Freak Poster Join Date: Aug 2011 Location: nepal Posts: 252 Member: 1635479 Status: Offline Thanks Meter: 122	close tpoic [QUOTE=deeptamu;11707577]j700f unlock secuty damage 2 solution helps unlock done v23.9 pro tools z3x

03-21-2016, 12:21	#15866 (permalink)
ru.mobile Freak Poster Join Date: Jan 2015 Location: Serbia Posts: 233 Member: 2334138 Status: Offline Thanks Meter: 78	Samsung i8260 unlock done Z3X USB cable: 1. Phone must be powered on. 2. Type *#7284# and choose phone USB. 3. Reboot phone. 4. Connect USB cable, install drivers if needed. 5. Select diagnostic port in port settings. 6. Press 'Unlock' button for direct unlock or 'Read codes' to read security codes. Operation: Unlock Selected model: GT-I8260 Selected port: COM81 SAMSUNG Mobile USB Serial Port Software version: 24.8 Reading phone info... OK Model: GT-I8260 Country code: ŞU Cal date: ŞU Factory SW: I8260XXAMF2 Unique number: CL708041A8460B0 Memory phone: ŞU Phone S/N: RF1DB86BTK PDA/CSC version: I8260XXAMF2/I8260OXXAMG2 Phone version: SW VERSION :None Phone HW: MP 0.801 Cal date: 2013.11.29 Reading IMEI... OK IMEI: 359826053257395 Bypass MSL... OK Unlocking... OK Reseting... OK Unlock done Done with Samsung Tool PRO v.24.8

03-21-2016, 15:24	#15867 (permalink)
manpreetmani Freak Poster Join Date: May 2013 Location: india punjab Posts: 412 Member: 1930279 Status: Offline Sonork: 100.1663273 Thanks Meter: 113	c3312r sim lock remove done. Selected model: GT-C3312R Selected port: Auto, 921600 Software version: 24.8 Connect phone in flash mode Waiting phone... OK Sending preloader... OK Sending loader... OK Checking Flash ID... OK Detected Flash ID: 003000EC Reading security... OK Patching firmware block... OK Erase Flash... OK Writing security... OK Rebooting phone... OK If phone not powered ON - turn ON phone Searching Samsung modem... detected COM17 Reading phone info... Model: Country code: Factory SW: Unique number: Memory phone: Software version: C3312RXXMB4/C3312ROXEMK2 IMEI: 3557760 Reading Phone S/N... OK Phone S/N: RZ1D30863Q Bypass MSL... OK Unlocking... OK Done with Samsung Tool PRO v.24.8

03-21-2016, 16:20	#15868 (permalink)
ghacks No Life Poster Join Date: Dec 2009 Location: *** Taste Good Age: 39 Posts: 4,066 Member: 1196914 Status: Offline** Sonork: 100.1667938 Thanks Meter: 1,645	SGH-T889 unlcok done by 24.8 UNLOCK INSTRUCTIONS: Micro-USB cable: 1. Phone must be powered on. 2. Type #0808# and select 'DM+MODEM+ADB'. 3. Type #9090# and choose USB (or 'DM/DUN over HSIC'). 4. Reboot phone. 5. Connect USB cable, install drivers if needed. 6. Select Samsung diagnostic port in port settings. 7. Press 'Unlock' button for direct unlock. Operation: Unlock Selected model: SGH-T889 Selected port: COM86 SAMSUNG Mobile USB Serial Port Software version: 24.8 Reading phone info... Reading IMEI... OK IMEI: 354340051835777 Unlocking... OK Reseting... OK Unlock done Done with Samsung Tool PRO v.24.8

03-21-2016, 17:02	#15869 (permalink)
anis_rainbow No Life Poster Join Date: Sep 2007 Location: Kushtia,Bangladesh Posts: 892 Member: 597569 Status: Offline Sonork: 100.1593870 Thanks Meter: 271	SHV-E250L flashing done Operation: Flash Selected model: SHV-E250L Software version: 24.8 File analysis... OK Total file size: 0x8101C428 (2064 Mb) Searching USB Flash Interface... detected COM15 Setup connection... OK Reading PIT from phone... OK Sending sboot.bin... OK Sending tz.img... OK Sending boot.img... OK Sending recovery.img... OK Sending system.img... OK Sending cache.img... OK Sending hidden.img... OK Sending modem.bin... OK Flashing done (time - 00:09:26) Done with Samsung Tool PRO v.24.8

03-21-2016, 17:57	#15870 (permalink)
Gambitv01 No Life Poster Join Date: Dec 2010 Location: Romania Posts: 1,532 Member: 1475064 Status: Offline Thanks Meter: 347	Operation: Reset MSL Selected model: SM-G900T Selected port: COM22 SAMSUNG Mobile USB Serial Port Software version: 24.8 Reading phone info... Reading IMEI... OK IMEI: 353300060478549 Reseting MSL security... OK Reseting... OK Reset MSL done Done with Samsung Tool PRO v.24.8 Operation: Write CERT Selected model: SM-G900T Selected port: COM22 SAMSUNG Mobile USB Serial Port Software version: 24.8 Checking certificate file... OK KEY ID: 0478 Waiting ADB device... Please, allow USB debugging on phone... OK Reading phone info... Model: SM-G900T Android version: 5.1.1 Product code: SM-G900TZWATMB Phone version: G900TUVS1FOL1 PDA version: G900TUVS1FOL1 CSC version: G900TTMB1FOL1 CSC country code: USA CSC sales code: TMB HW version: REV1.0 Phone S/N: RV8F311359A Modem board: MSM8974PRO RF cal date: 2015.06.12 IMEI: Initialization AT RIL... OK Bypass MSL... OK Checking for compatible phone and cert... OK Phone KEY ID: 0478 Writing CERT... OK Checking CERT status... OK Rebooting phone... OK Done with Samsung Tool PRO v.24.8 Operation: Unlock Selected model: SM-G900T Selected port: COM22 SAMSUNG Mobile USB Serial Port Software version: 24.8 Reading phone info... Reading IMEI... OK IMEI: 352558064833271 Unlocking... OK Reseting... OK Unlock done Done with Samsung Tool PRO v.24.8

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Post here successfully unlock or IMEI repair LG	andrew_tm	Z3X-Team Products	1841	07-06-2022 14:14
Post here successfully unlock or IMEI repair Infinity Box	R@ZIB-BD	Infinity-Box	3	07-04-2014 16:37
Post here successfully unlock or IMEI repair LG	R@ZIB-BD	Z3X-Team Products	2	02-01-2011 17:29