Post here successfully job with Z3X-BOX Samsung (2010-2018) - Page 1063 - GSM-Forum

zvrrr · 03-31-2016, 09:42

Selected model: C3530
Selected com port: COM3
Selected speed port: 921600
Phone must be OFF
Press * and connect phone by USB cable
Connecting to Device... OK
Sending preloader ... OK
Sending loader ... OK
Damping ... OK
Damping ... OK
Damping ... OK
Damping ... OK
Damping ... OK
Patch block
Patch block
Already patched SW
Erasing ... OK
Writing ... OK
After power on phone - connect to UART cable
Phone SN: RF6B808447
Deactivate MSL - OK
Calculated code please wait...
Decrypted time: 25 sec
This is zone 0
[PCK]:Enter this without sim #0141*00000000# this is sim lock
[NCK]:Enter this without sim #0111*23535888# this is net lock
[SCK]:Enter this without sim #0121*00000000# this is CP lock
[SPCK]:Enter this without sim #0133*00000000# this is SP lock
[MCK]:Enter this without sim #0199*44371399# this is Master(freeze) code

Read info - ok
Elapsed time: 123 second, sw ver: 3.5.0040

Dilip_Nath · 03-31-2016, 12:17

sr8787 · 04-01-2016, 11:03

samsung s3 mini i8200n unlock Done

Operation: Unlock
Selected model: GT-I8200N
Software version: 25.0

Waiting ADB device... OK
Reading phone info...
Model: GT-I8200N
Android version: 4.2.2
Product code: GT-I8200MBNVDI
Phone version: I8200NXXUANG1
PDA version: I8200NXXUANG1
CSC version: I8200NVFGANG1
CSC country code: Ireland
CSC sales code: VDI
HW version: MP 0.300
Phone S/N: R21FB08RBKN
Modem board: PXA986
RF cal date: 20141104
IMEI: 35991905xxxxxxx
Checking Super user right... true
Bypass MSL... OK
Unlocking... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.25.0

Thanks z3x Team

kiki49 · 04-01-2016, 15:08

Operation: Unlock
Selected model: SM-G920T
Software version: 25.0

Waiting ADB device... OK
Reading phone info...
Model: SM-G920T
Android version: 5.1.1
Product code: SM-G920TZKAXAR
Phone version: G920TUEU3COK1
PDA version: G920TUEU3COK1
CSC version: G920TXAR3COK1
CSC country code: USA
CSC sales code: XAR
HW version: REV1.0
Phone S/N: R58xxxxxxxx
Modem board: SHANNON333
RF cal date: 20150319
IMEI:
Checking Super user right... true
Initializating zTool... OK
Running zTool, please wait...
Start... OK
Init... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data... OK
Reading nv data... OK
Checking NV data... OK
Calculating... OK
Unlocking... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.25.0

lovist2 · 04-01-2016, 18:45

SAMSUNG S6 EDGE+ (SM-G928C) FRP REMOVE

Operation: Reset FRP/React/EE
Selected model: SM-G928C
Software version: 25.0

Searching Samsung USB Flash Interface... detected COM78
Setup connection... OK
Reading PIT from phone... OK
Searching FRP lock... OK
Erasing FRP... OK
Searching Reactivation lock... OK
Erasing Reactivation lock... OK
Searching EE lock... OK
Erasing EE lock... OK
Reset done

Done with Samsung Tool PRO v.25.0

saaim · 04-02-2016, 16:32

Waiting ADB device... OK
Reading phone info...
Model: SM-G920F
Android version: 6.0.1
Product code: SM-G920FZWFVOD
Phone version: G920FXXS3DPC2
PDA version: G920FXXS3DPC2
CSC version: G920FVFG3DPC1
CSC country code: UK
CSC sales code: VOD
HW version: MP 0.80V
Phone S/N: RF8G50J4QVT
Modem board: SHANNON333
RF cal date: 20150509
IMEI:
Checking Super user right... true
Initializating zTool... OK
Running zTool, please wait...
Start... OK
Init... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data... OK
Checking certificate file... OK
KEY ID: 0346
Reading nv data... OK
Checking NV data... OK
Calculating... OK
Writing nv data... OK
Rebooting phone... OK
Write CERT done

Done with Samsung Tool PRO v.25.0

ghacks · 04-02-2016, 21:48

repair imei sgh-i747 repair done

REPAIR INSTRUCTIONS:
Repair IMEI/Serial/BT/WiFi/Product Code:
1. Power on the phone.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Reboot phone.
4. Connect USB cable, install drivers if needed.
5. Select Samsung diagnostic port in port settings.
6. Press 'Reset MSL' button to deactivate security.
7. Wait till phone reboot.
8. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
9. Select device in ADB settings.
10. Fill values what you need to repair.
11. Press 'Repair' button.

Reset EFS, Disable Factory Mode:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Reset EFS' if you need to reset it.
Be carefully, do not perform this without necessity. Backup will be created automatically.
6. If you have yellow table on your device screen, then press 'Disable Factory Mode' button.

Wipe EFS/NVM:
If you have 'IMEI null/null' or 'Phone baseband unknown' errors,
Then you can try to repair this errors with this function.
1. Power on phone in download mode (turn off phone, hold Volume Down + Home + Power).
2. Connect USB cable, install drivers if needed.
3. Press 'Wipe EFS/NVM' button to deactivate security.
4. Wait till phone reboot.

Operation: Repair
Selected model: SGH-I747
Selected port: COM141 SAMSUNG Mobile USB Serial Port
Software version: 25.0

Waiting ADB device...
Please, allow USB debugging on phone... OK
Reading phone info...
Model: SAMSUNG-SGH-I747
Android version: 4.4.2
Product code: Not Active
Phone version: I747UCUFNE4
PDA version: I747UCUFNE4
CSC version: I747ATTFNE4
CSC country code: USA
CSC sales code: ATT
HW version: I747.00
Phone S/N: R21CA2W61YY
Modem board: MSM8960
RF cal date: NONE
IMEI:
Initialization AT RIL... OK
Bypass MSL... OK
Repairing IMEI... OK
Rebooting phone... OK
Repair done

Done with Samsung Tool PRO v.25.0

skynett_md · 04-03-2016, 11:38

First Root the phone with CF-Auto-Root-zeroflte-zerofltexx-smg920f.zip

Unlock codes did not work, But after Direct unlock - all ok

Operation: Read Codes
Selected model: SM-G920F
Software version: 25.0

Checking hash file... OK
Waiting ADB device... OK
Reading phone info...
Model: SM-G920F
Android version: 6.0.1
Product code: SM-G920FZWAITV
Phone version: G920FXXS3DPB3
PDA version: G920FXXS3DPB2
CSC version: G920FITV3DPB2
CSC country code: ITALY
CSC sales code: ITV
HW version: MP 0.800
Phone S/N: R28G30ESW3J
Modem board: SHANNON333
RF cal date: 20150305
IMEI:
Checking Super user right... true
Initializating zTool... OK
Running zTool, please wait...
Start... OK
Init... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data... OK
Reading nv data... OK
Checking NV data... OK
Calculating... OK
Please wait, calculating codes... OK (time - 00:00:09)
Freeze code: 81609080
NET lock: 61495963
Sub lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#

Operation: Unlock
Selected model: SM-G920F
Software version: 25.0

Waiting ADB device... OK
Reading phone info...
Model: SM-G920F
Android version: 6.0.1
Product code: SM-G920FZWAITV
Phone version: G920FXXS3DPB3
PDA version: G920FXXS3DPB2
CSC version: G920FITV3DPB2
CSC country code: ITALY
CSC sales code: ITV
HW version: MP 0.800
Phone S/N: R28G30ESW3J
Modem board: SHANNON333
RF cal date: 20150305
IMEI:
Checking Super user right... true
Initializating zTool... OK
Running zTool, please wait...
Start... OK
Init... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data... OK
Reading nv data... OK
Checking NV data... OK
Calculating... OK
Unlocking... OK
Rebooting phone... OK
Unlock done

katastyle · 04-03-2016, 12:01

Hello all users
My samsung galaxy S6 SM-G920T need imei repair : 350000000000006/19
Not have Z3x box

Thank you

.:: A R X ::. · 04-03-2016, 13:43

anis_rainbow · 04-03-2016, 15:09

SM-J110G unlocked

Code:

Operation: Unlock
Selected model: SM-J110G
Software version: 25.0

Waiting ADB device...
Please, allow USB debugging on phone... OK
Reading phone info...
Model: SM-J110G
Android version: 4.4.4
Product code: SM-J110GZWDXME
Phone version: J110GDXU0AOH3
PDA version: J110GDXU0AOH2
CSC version: J110GOLB0AOH2
CSC country code: MALAYSIA
CSC sales code: XME
HW version: MP 0.400
Phone S/N: R58G91DS6QD
Modem board: 
RF cal date: 20150917
IMEI: 353406070382306
Checking Super user right... true
Reading nv data... OK
Analysing SEC file... OK
Initialization AT RIL... OK
Bypass MSL... OK
Unlocking... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.25.0

mr.luckytarun · 04-03-2016, 15:15

SM-G530H flash done

File analysis... OK
Total file size: 0x52A655EC (1322 Mb)
Searching USB Flash Interface... detected COM33
Setup connection... OK
Set PIT file... OK
Reading PIT from phone... OK
Sending aboot.mbn... OK
Sending sbl1.mbn... OK
Sending rpm.mbn... OK
Sending tz.mbn... OK
Sending hyp.mbn... OK
Sending NON-HLOS.bin... OK
Sending sec.dat... OK
Sending boot.img... OK
Sending recovery.img... OK
Sending system.img.ext4... OK
Sending persist.img.ext4... OK
Sending persdata.img.ext4... OK
Sending modem.bin... OK
Sending cache.img.ext4... OK
Sending hidden.img.ext4... OK
Flashing done (time - 00:03:14)

Done with Samsung Tool PRO v.25.0

JT man · 04-04-2016, 01:50

Operation: Unlock
Selected model: SM-N920W8
Software version: 25.0

Waiting ADB device...
Please, allow USB debugging on phone... OK
Reading phone info...
Model: SM-N920W8
Android version: 5.1.1
Product code: SM-N920WZDAPCT
Phone version: N920W8VLU2AOK5
PDA version: N920W8VLU2AOK5
CSC version: N920W8UWA2AOL1
CSC country code: Puerto Rico
CSC sales code: PCT
HW version: REV1.0
Phone S/N: RF8G811FJ4F
Modem board: SHANNON333
RF cal date: 20150812
IMEI:
Checking Super user right... true
Initializating zTool... OK
Running zTool, please wait...
Start... OK
Init... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data... OK
Reading nv data... OK
Checking NV data... OK
Calculating... OK
Unlocking... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.25.0

SameerN · 04-04-2016, 04:37

Checking hash file... OK
Waiting ADB device...
Please, allow USB debugging on phone... OK
Reading phone info...
Model: SM-G925W8
Android version: 5.1.1
Product code: SM-G925WZWERWC
Phone version: G925W8VLU3BOJ7
PDA version: G925W8VLU3BOJ7
CSC version: G925W8OYA3BOJ7
CSC country code: Canada
CSC sales code: RWC
HW version: REV0.1
Phone S/N: R58G61GNB8L
Modem board: SHANNON333
RF cal date: 20150905
IMEI:
Checking Super user right... true
Initializating zTool... OK
Running zTool, please wait...
Start... OK
Init... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data... OK
Reading nv data... OK
Checking NV data... OK
Calculating... OK
Please wait, calculating codes... OK (time - 00:00:09)
Sub lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#
Done with Samsung Tool PRO v.25.0

Operation: Read Codes
Selected model: SM-G930W8
Software version: 25.0

Checking hash file... OK
Waiting ADB device...
Please, allow USB debugging on phone... OK
Reading phone info...
Model: SM-G930W8
Android version: 6.0.1
Product code: SM-G930WZKATLS
Phone version: G930W8VLU1APB7
PDA version: G930W8VLU1APB7
CSC version: G930W8OYA1APB7
CSC country code: Canada
CSC sales code: TLS
HW version: REV0.2
Phone S/N: R58H20TLLNM
Modem board: SHANNON335
RF cal date: 20160211
IMEI:
Checking Super user right... true
Initializating zTool... OK
Running zTool, please wait...
Start... OK
Init... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data... OK
Reading nv data... OK
Checking NV data... OK
Calculating... OK
Please wait, calculating codes... OK (time - 00:00:06)
Freeze code: 50394281
NET lock: 81814240
Sub lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#
Done with Samsung Tool PRO v.25.0

sr8787 · 04-04-2016, 08:57

Samsung S5 unlock Done

Operation: Unlock
Selected model: SM-G900W8
Selected port: COM424 SAMSUNG Mobile USB Serial Port
Software version: 25.0

Reading phone info...
Reading IMEI... OK
IMEI: 35230806xxxxxxx
Unlocking... OK

Reseting... OK
Unlock done

Done with Samsung Tool PRO v.25.0

Thanks z3x Team

03-31-2016, 12:17	#15932 (permalink)
Dilip_Nath No Life Poster Join Date: Nov 2006 Location: Bangladesh Posts: 1,377 Member: 387110 Status: Offline Sonork: Not Use Thanks Meter: 630	SM-G531H/DS FRP Reset Done

04-02-2016, 16:32	#15936 (permalink)
saaim Insane Poster Join Date: Jan 2011 Location: bahawal pur Posts: 62 Member: 1501098 Status: Offline Thanks Meter: 4	g920f cert write successfull Waiting ADB device... OK Reading phone info... Model: SM-G920F Android version: 6.0.1 Product code: SM-G920FZWFVOD Phone version: G920FXXS3DPC2 PDA version: G920FXXS3DPC2 CSC version: G920FVFG3DPC1 CSC country code: UK CSC sales code: VOD HW version: MP 0.80V Phone S/N: RF8G50J4QVT Modem board: SHANNON333 RF cal date: 20150509 IMEI: Checking Super user right... true Initializating zTool... OK Running zTool, please wait... Start... OK Init... OK Generate and check client proof... OK Verify proof by client... OK Reading data... OK Checking certificate file... OK KEY ID: 0346 Reading nv data... OK Checking NV data... OK Calculating... OK Writing nv data... OK Rebooting phone... OK Write CERT done Done with Samsung Tool PRO v.25.0

04-03-2016, 11:38	#15938 (permalink)
skynett_md Crazy Poster Join Date: Jun 2009 Posts: 57 Member: 1055926 Status: Offline Thanks Meter: 31	S6 G920F 6.0.1 Unlock Done ! First Root the phone with CF-Auto-Root-zeroflte-zerofltexx-smg920f.zip Unlock codes did not work, But after Direct unlock - all ok Operation: Read Codes Selected model: SM-G920F Software version: 25.0 Checking hash file... OK Waiting ADB device... OK Reading phone info... Model: SM-G920F Android version: 6.0.1 Product code: SM-G920FZWAITV Phone version: G920FXXS3DPB3 PDA version: G920FXXS3DPB2 CSC version: G920FITV3DPB2 CSC country code: ITALY CSC sales code: ITV HW version: MP 0.800 Phone S/N: R28G30ESW3J Modem board: SHANNON333 RF cal date: 20150305 IMEI: Checking Super user right... true Initializating zTool... OK Running zTool, please wait... Start... OK Init... OK Generate and check client proof... OK Verify proof by client... OK Reading data... OK Reading nv data... OK Checking NV data... OK Calculating... OK Please wait, calculating codes... OK (time - 00:00:09) Freeze code: 81609080 NET lock: 61495963 Sub lock: 00000000 SP lock: 00000000 CP lock: 00000000 SIM lock: 00000000 For check lock status: *#7465625# Operation: Unlock Selected model: SM-G920F Software version: 25.0 Waiting ADB device... OK Reading phone info... Model: SM-G920F Android version: 6.0.1 Product code: SM-G920FZWAITV Phone version: G920FXXS3DPB3 PDA version: G920FXXS3DPB2 CSC version: G920FITV3DPB2 CSC country code: ITALY CSC sales code: ITV HW version: MP 0.800 Phone S/N: R28G30ESW3J Modem board: SHANNON333 RF cal date: 20150305 IMEI: Checking Super user right... true Initializating zTool... OK Running zTool, please wait... Start... OK Init... OK Generate and check client proof... OK Verify proof by client... OK Reading data... OK Reading nv data... OK Checking NV data... OK Calculating... OK Unlocking... OK Rebooting phone... OK Unlock done

04-03-2016, 12:01	#15939 (permalink)
katastyle Insane Poster Join Date: Jun 2005 Location: dominic republic Posts: 73 Member: 155989 Status: Offline Thanks Meter: 14	Need imei repair Hello all users My samsung galaxy S6 SM-G920T need imei repair : 350000000000006/19 Not have Z3x box Thank you

04-03-2016, 13:43	#15940 (permalink)
.:: A R X ::. Freak Poster Join Date: Mar 2016 Posts: 162 Member: 2553197 Status: Offline Thanks Meter: 32	samsung sgh-i317 unlock done

03-31-2016, 09:42	#15931 (permalink)
zvrrr Freak Poster Join Date: Aug 2013 Posts: 409 Member: 1995502 Status: Offline Thanks Meter: 139	Selected model: C3530 Selected com port: COM3 Selected speed port: 921600 Phone must be OFF Press * and connect phone by USB cable Connecting to Device... OK Sending preloader ... OK Sending loader ... OK Damping ... OK Damping ... OK Damping ... OK Damping ... OK Damping ... OK Patch block Patch block Already patched SW Erasing ... OK Writing ... OK After power on phone - connect to UART cable Phone SN: RF6B808447 Deactivate MSL - OK Calculated code please wait... Decrypted time: 25 sec This is zone 0 [PCK]:Enter this without sim #014100000000# this is sim lock [NCK]:Enter this without sim #011123535888# this is net lock [SCK]:Enter this without sim #012100000000# this is CP lock [SPCK]:Enter this without sim #013300000000# this is SP lock [MCK]:Enter this without sim #0199*44371399# this is Master(freeze) code Read info - ok Elapsed time: 123 second, sw ver: 3.5.0040

04-01-2016, 11:03	#15933 (permalink)
sr8787 No Life Poster Join Date: Jun 2008 Location: Punjabi University India Posts: 1,473 Member: 788946 Status: Offline Sonork: 100.1682685 Thanks Meter: 502	samsung s3 mini i8200n unlock Done Operation: Unlock Selected model: GT-I8200N Software version: 25.0 Waiting ADB device... OK Reading phone info... Model: GT-I8200N Android version: 4.2.2 Product code: GT-I8200MBNVDI Phone version: I8200NXXUANG1 PDA version: I8200NXXUANG1 CSC version: I8200NVFGANG1 CSC country code: Ireland CSC sales code: VDI HW version: MP 0.300 Phone S/N: R21FB08RBKN Modem board: PXA986 RF cal date: 20141104 IMEI: 35991905xxxxxxx Checking Super user right... true Bypass MSL... OK Unlocking... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.25.0 Thanks z3x Team

04-01-2016, 15:08	#15934 (permalink)
kiki49 No Life Poster Join Date: Sep 2010 Location: Gsm-Djibouti Posts: 637 Member: 1406357 Status: Offline Sonork: 100.1654421 Thanks Meter: 45	Operation: Unlock Selected model: SM-G920T Software version: 25.0 Waiting ADB device... OK Reading phone info... Model: SM-G920T Android version: 5.1.1 Product code: SM-G920TZKAXAR Phone version: G920TUEU3COK1 PDA version: G920TUEU3COK1 CSC version: G920TXAR3COK1 CSC country code: USA CSC sales code: XAR HW version: REV1.0 Phone S/N: R58xxxxxxxx Modem board: SHANNON333 RF cal date: 20150319 IMEI: Checking Super user right... true Initializating zTool... OK Running zTool, please wait... Start... OK Init... OK Generate and check client proof... OK Verify proof by client... OK Reading data... OK Reading nv data... OK Checking NV data... OK Calculating... OK Unlocking... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.25.0

04-01-2016, 18:45	#15935 (permalink)
lovist2 Freak Poster Join Date: Aug 2008 Location: Cote d'Ivoire Posts: 275 Member: 841640 Status: Offline Thanks Meter: 86	SAMSUNG S6 EDGE+ (SM-G928C) FRP REMOVE Operation: Reset FRP/React/EE Selected model: SM-G928C Software version: 25.0 Searching Samsung USB Flash Interface... detected COM78 Setup connection... OK Reading PIT from phone... OK Searching FRP lock... OK Erasing FRP... OK Searching Reactivation lock... OK Erasing Reactivation lock... OK Searching EE lock... OK Erasing EE lock... OK Reset done Done with Samsung Tool PRO v.25.0

04-02-2016, 21:48	#15937 (permalink)
ghacks No Life Poster Join Date: Dec 2009 Location: *** Taste Good Age: 39 Posts: 4,066 Member: 1196914 Status: Offline** Sonork: 100.1667938 Thanks Meter: 1,645	repair imei sgh-i747 repair done REPAIR INSTRUCTIONS: Repair IMEI/Serial/BT/WiFi/Product Code: 1. Power on the phone. 2. Type *#0808# and select 'DM+MODEM+ADB'. 3. Reboot phone. 4. Connect USB cable, install drivers if needed. 5. Select Samsung diagnostic port in port settings. 6. Press 'Reset MSL' button to deactivate security. 7. Wait till phone reboot. 8. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options', go to 'Settings'-'Developer options' and enable 'USB debugging'. 9. Select device in ADB settings. 10. Fill values what you need to repair. 11. Press 'Repair' button. Reset EFS, Disable Factory Mode: Phone must be rooted! If the software can't root the phone automatically, then you must root your device manually. 1. Power on the phone. 2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options', go to 'Settings'-'Developer options' and enable 'USB debugging'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Press 'Reset EFS' if you need to reset it. Be carefully, do not perform this without necessity. Backup will be created automatically. 6. If you have yellow table on your device screen, then press 'Disable Factory Mode' button. Wipe EFS/NVM: If you have 'IMEI null/null' or 'Phone baseband unknown' errors, Then you can try to repair this errors with this function. 1. Power on phone in download mode (turn off phone, hold Volume Down + Home + Power). 2. Connect USB cable, install drivers if needed. 3. Press 'Wipe EFS/NVM' button to deactivate security. 4. Wait till phone reboot. Operation: Repair Selected model: SGH-I747 Selected port: COM141 SAMSUNG Mobile USB Serial Port Software version: 25.0 Waiting ADB device... Please, allow USB debugging on phone... OK Reading phone info... Model: SAMSUNG-SGH-I747 Android version: 4.4.2 Product code: Not Active Phone version: I747UCUFNE4 PDA version: I747UCUFNE4 CSC version: I747ATTFNE4 CSC country code: USA CSC sales code: ATT HW version: I747.00 Phone S/N: R21CA2W61YY Modem board: MSM8960 RF cal date: NONE IMEI: Initialization AT RIL... OK Bypass MSL... OK Repairing IMEI... OK Rebooting phone... OK Repair done Done with Samsung Tool PRO v.25.0

04-03-2016, 15:15	#15942 (permalink)
mr.luckytarun No Life Poster Join Date: Dec 2009 Location: INDIA Age: 36 Posts: 3,135 Member: 1195083 Status: Offline Sonork: QQ:3208821449 Thanks Meter: 1,348	SM-G530H flash done File analysis... OK Total file size: 0x52A655EC (1322 Mb) Searching USB Flash Interface... detected COM33 Setup connection... OK Set PIT file... OK Reading PIT from phone... OK Sending aboot.mbn... OK Sending sbl1.mbn... OK Sending rpm.mbn... OK Sending tz.mbn... OK Sending hyp.mbn... OK Sending NON-HLOS.bin... OK Sending sec.dat... OK Sending boot.img... OK Sending recovery.img... OK Sending system.img.ext4... OK Sending persist.img.ext4... OK Sending persdata.img.ext4... OK Sending modem.bin... OK Sending cache.img.ext4... OK Sending hidden.img.ext4... OK Flashing done (time - 00:03:14) Done with Samsung Tool PRO v.25.0

04-04-2016, 01:50	#15943 (permalink)
JT man No Life Poster Join Date: Aug 2015 Location: usa Posts: 1,026 Member: 2444830 Status: Offline Thanks Meter: 162	Operation: Unlock Selected model: SM-N920W8 Software version: 25.0 Waiting ADB device... Please, allow USB debugging on phone... OK Reading phone info... Model: SM-N920W8 Android version: 5.1.1 Product code: SM-N920WZDAPCT Phone version: N920W8VLU2AOK5 PDA version: N920W8VLU2AOK5 CSC version: N920W8UWA2AOL1 CSC country code: Puerto Rico CSC sales code: PCT HW version: REV1.0 Phone S/N: RF8G811FJ4F Modem board: SHANNON333 RF cal date: 20150812 IMEI: Checking Super user right... true Initializating zTool... OK Running zTool, please wait... Start... OK Init... OK Generate and check client proof... OK Verify proof by client... OK Reading data... OK Reading nv data... OK Checking NV data... OK Calculating... OK Unlocking... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.25.0

04-04-2016, 04:37	#15944 (permalink)
SameerN Junior Member Join Date: Aug 2005 Location: CANADA Age: 39 Posts: 30 Member: 166459 Status: Offline Thanks Meter: 9	Checking hash file... OK Waiting ADB device... Please, allow USB debugging on phone... OK Reading phone info... Model: SM-G925W8 Android version: 5.1.1 Product code: SM-G925WZWERWC Phone version: G925W8VLU3BOJ7 PDA version: G925W8VLU3BOJ7 CSC version: G925W8OYA3BOJ7 CSC country code: Canada CSC sales code: RWC HW version: REV0.1 Phone S/N: R58G61GNB8L Modem board: SHANNON333 RF cal date: 20150905 IMEI: Checking Super user right... true Initializating zTool... OK Running zTool, please wait... Start... OK Init... OK Generate and check client proof... OK Verify proof by client... OK Reading data... OK Reading nv data... OK Checking NV data... OK Calculating... OK Please wait, calculating codes... OK (time - 00:00:09) Sub lock: 00000000 SP lock: 00000000 CP lock: 00000000 SIM lock: 00000000 For check lock status: #7465625# Done with Samsung Tool PRO v.25.0 Operation: Read Codes Selected model: SM-G930W8 Software version: 25.0 Checking hash file... OK Waiting ADB device... Please, allow USB debugging on phone... OK Reading phone info... Model: SM-G930W8 Android version: 6.0.1 Product code: SM-G930WZKATLS Phone version: G930W8VLU1APB7 PDA version: G930W8VLU1APB7 CSC version: G930W8OYA1APB7 CSC country code: Canada CSC sales code: TLS HW version: REV0.2 Phone S/N: R58H20TLLNM Modem board: SHANNON335 RF cal date: 20160211 IMEI: Checking Super user right... true Initializating zTool... OK Running zTool, please wait... Start... OK Init... OK Generate and check client proof... OK Verify proof by client... OK Reading data... OK Reading nv data... OK Checking NV data... OK Calculating... OK Please wait, calculating codes... OK (time - 00:00:06) Freeze code: 50394281 NET lock: 81814240 Sub lock: 00000000 SP lock: 00000000 CP lock: 00000000 SIM lock: 00000000 For check lock status: #7465625# Done with Samsung Tool PRO v.25.0

04-04-2016, 08:57	#15945 (permalink)
sr8787 No Life Poster Join Date: Jun 2008 Location: Punjabi University India Posts: 1,473 Member: 788946 Status: Offline Sonork: 100.1682685 Thanks Meter: 502	Samsung S5 unlock Done Operation: Unlock Selected model: SM-G900W8 Selected port: COM424 SAMSUNG Mobile USB Serial Port Software version: 25.0 Reading phone info... Reading IMEI... OK IMEI: 35230806xxxxxxx Unlocking... OK Reseting... OK Unlock done Done with Samsung Tool PRO v.25.0 Thanks z3x Team

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Post here successfully unlock or IMEI repair LG	andrew_tm	Z3X-Team Products	1841	07-06-2022 14:14
Post here successfully unlock or IMEI repair Infinity Box	R@ZIB-BD	Infinity-Box	3	07-04-2014 16:37
Post here successfully unlock or IMEI repair LG	R@ZIB-BD	Z3X-Team Products	2	02-01-2011 17:29