Post here successfully job with Z3X-BOX Samsung (2010-2018) - Page 660 - GSM-Forum

cellcarcol · 12-24-2013, 22:13

Selected model: I9500
Selected port: COM100 Z3X BOX Serial Port
Selected port speed: 115200
Searching ADB device... OK
Reading phone info...
Model: GT-I9500
Android version: 4.3
Product code: GT-I9500ZWLTTT
Phone version: I9500XXUEMJ8
PDA version: I9500UBUEMK1
CSC version: I9500UUBEMK1
IMEI: 355799051703435
Phone S/N: RV1D44WQ5CP
Checking Super user right... true
Reading nv data... OK
Reading modem... OK
Checking magic... OK
Running zTool, please wait... OK
Detected new type of security
Calculating... OK
Patching modem... OK
Writing data to phone... OK
Rebooting phone... OK
Repair done
Done with Samsung Tool v.16.4

..::Rizwan::.. · 12-25-2013, 16:31

Model: GT-I8910
CountryCode: ORA
Factory SW: I8910XXIE6
UniqueNumber: 71000000589880
MemoryPhone: MD512256B(I8910)S
PDA/CSC version: I8910BVIE2/I8910ORAIE2
Phone version: I8910XXIDD
Phone HW: MP 1.000
IMEI: 35874102XXXXXX/1
Phone S/N: R7XS500684
Build: M6290A-KPRBL-2.2.004006T
Reading Security... OK
Bypass MSL... OK
Unlocking ... OK
Done with Samsung 3G tool ver 16.7

LouaiSamuel · 12-25-2013, 19:32

Selected model: I9305
Selected port: COM13 Qualcomm HS-USB Diagnostics 9004
Selected port speed: 115200
Reading phone info...
Build: M9615ACEHWMAZD1795
Reading security... OK
Calculating... OK
Writing security... OK
Reseting...
Unlock done
Done with Samsung Tool v.16.7

Selected model: I9305
Selected port: COM13 Qualcomm HS-USB Diagnostics 9004
Selected port speed: 115200
Checking phone at COM13
Repairing IMEI... OK
Reseting... OK
Repair done
Done with Samsung Tool v.16.7

syed 2014 · 12-25-2013, 23:20

AFTER FLASHING IMEI HAS BEEN CHANGED
TRYING TO REPAIR IMEI BUT STILL SAME
LOG:

Selected model: I9300
Selected port: COM6 USB Serial Port
Selected port speed: 115200
File analysis... OK
Total file size: 0x00000000
Searching USB Flash Interface... not found
Done with Samsung Tool v.16.6

Selected model: I9300
Selected port: COM6 USB Serial Port
Selected port speed: 115200
Searching ADB device... OK
Reading phone info...
Model: GT-I9300
Android version: 4.0.4
Product code: GT-I9300MBDVD2
Phone version: I9300BULE6
PDA version: I9300BUALE6
CSC version: I9300VFGALE6
IMEI: 004999010640000
Phone S/N: RV1D248K9NF
Checking Super user right... false
Rooting phone, please wait... OK
Checking Super user right... true
Reading nv data... OK
Reading modem... OK
Reading kernel... OK
Checking magic... OK
Running zTool, please wait... OK
Detected new type of security
Calculating... OK
Patching modem... OK
Writing data to phone... OK
Rebooting phone... OK
Repair done
Done with Samsung Tool v.16.6

Selected model: I9300
Selected port: COM6 USB Serial Port
Selected port speed: 115200
Searching ADB device... OK
Reading phone info...
Model: GT-I9300
Android version: 4.0.4
Product code: GT-I9300MBDVD2
Phone version: I9300BULE6
PDA version: I9300BUALE6
CSC version: I9300VFGALE6
IMEI: 004999010640000
Phone S/N: RV1D248K9NF
Checking Super user right... true
Reading nv data... OK
Reading modem... OK
Reading kernel... OK
Checking magic... OK
Running zTool, please wait... OK
Detected new type of security
Calculating... OK
Patching modem... OK
Writing data to phone... OK
Rebooting phone... OK
Repair done
Done with Samsung Tool v.16.6

Dilip_Nath · 12-26-2013, 06:44

ak0101 · 12-26-2013, 10:07

Selected model: C3520
Selected com port: COM4
Selected speed port: 921600
Please, connect phone and press power button 3 seconds
Phone Detected
Use automatic parameters
Phone in TAT MODE
Phone IMEI: 35526105973455
Phone SW: C3520XXMA3
Phone CSC: C3520OXAMA3
Phone BT ADDR: F05A-09-4C02D8
Phone SN: RV1D33PZEW
[FREZEE]:03436870
[NET LOCK]:00000000
[Subset LOCK]:00000000
[SP LOCK]:00000000
[CP LOCK]:00000000
[Sim LOCK]:3605
[Activa LOCK]:00000000
[Phone LOCK]:00000000
Read info - ok
Elapsed time: 20 second, sw ver: 3.5.0040

jboy · 12-26-2013, 19:40

Selected model: S7580
Selected port: COM3 Z3X BOX Serial Port
Selected port speed: 115200
Please, allow USB debugging on phone...
Reading phone info...
Model: GT-S7580
Android version: 4.2.2
Product code: Unknown
Phone version: S7580XXUAMK5
PDA version: S7580XXUAMK6
CSC version: S7580COVAMJ1
IMEI: 359702052690912
Phone S/N: R21DC1KDMWZ
Checking Super user right... true
Reading data from phone... OK
Unlocking... OK
Rebooting phone... OK
Unlock done
Done with Samsung Tool v.16.7

Done with Samsung Tool v.16.7

Manualy rooted with Klingoroot tool from http://www.kingoapp.com/

vicky_tomar · 12-27-2013, 06:26

samsung e1200t HANGING done

Quote:

Selected model: E1200T
Selected com port: COM8
Selected speed port: 115200
Please, connect phone and press power button 3 seconds
Phone Detected
Sending loader1... OK
Flash ID: F816
Sending loader2... OK
Start TFS format... OK
Start NOR flash
NOR flash - ok
LPD flash - ok
Start Flash TFS
TFS flash - ok
Start Flash CSC
CSC format - ok
CSC flash - ok
Download - ok
Elapsed time: 682 second, sw ver: 3.5.0040

BR:, VICKY TOMAR

vicky_tomar · 12-27-2013, 09:48

samsung e2232 menu problem solve

BR:, VICKY TOMAR

.::AZEEM::. · 12-27-2013, 11:10

Samsung I9082 4.2.2 unlock success !!!

U need to root manually after than unlock
for root have many free tools for me i use VRoot tool

Quote:

Selected model: I9082
Selected port: COM3 Z3X BOX Serial Port
Selected port speed: 115200
Please, allow USB debugging on phone...
Reading phone info...
Model: GT-I9082
Android version: 4.2.2
Product code: Unknown
Phone version: I9082XXUBMH1
PDA version: I9082XXUBMHC
CSC version: I9082OJVBMH3
IMEI: 359038050xxxxxxxxxx
Phone S/N: RF1DA1PJT6L
Checking Super user right... true
Reading data from phone... OK
Unlocking... OK
Rebooting phone... OK
Unlock done
Done with Samsung Tool v.16.7

.::AZEEM::. · 12-27-2013, 12:05

Samsung s7562 imei change success !!!!

Quote:

Selected model: S7562
Selected port: COM10 SAMSUNG Mobile USB Serial Port
Selected port speed: 115200
Reading phone info...
PDA/CSC version: S7562XXBMG2/S7562ODDBMG1
Phone version: SW VERSION :None
Phone HW: MP 0.600
Cal date: 2013.09.21
Searching ADB device... OK
Reading phone info...
Model: GT-S7562
Android version: 4.0.4
Product code: GT-S7562ZKAINS
Phone version: S7562DDBMG1
PDA version: S7562XXBMG2
CSC version: S7562ODDBMG1
IMEI: 3583020xxxxxxxxxxx
Phone S/N: RZ1D943RCKN
Checking Super user right... true
Reading data from phone... OK
Writing data to phone... OK
Rebooting phone... OK
Checking phone at COM10
Reading phone info...
PDA/CSC version: S7562XXBMG2/none
Phone version: SW VERSION :None
Phone HW: MP 0.600
Cal date: 2013.09.21
Repairing Master IMEI... OK
Repairing Slave IMEI... OK
Reseting... OK
Done with Samsung Tool v.16.7

usi_golden · 12-27-2013, 17:57

E2600 unlock done thx Z3x TEAM

Quote:

Selected model: E2600
Selected com port: COM3
Selected speed port: 921600
Phone must be OFF
Press * and connect phone by USB cable
Connecting to Device... OK
Sending preloader ... OK
Sending loader ... OK
Erasing ... OK
Sending...E2600XXKJ4_psi.fls (psi.fls)
Writing ... OK
Sending...E2600XXKJ4_slb.fls (slb.fls)
Writing ... OK
Sending...E2600XXKJ4_BIN.fls (CATFISH.fls)
Writing ... OK
Writing ... OK
Sending...E2600XXKJ4_CDS.fls (CATFISH.fls)
Writing ... OK
Sending...E2600OXEKJ4_CSC.dffs (temp_GT-E2600_OXE.dffs)
Writing ... OK
Flash FLS - ok
Elapsed time: 128 second, sw ver: 3.5.0040
-------------------------------------------------------------------------------
Selected model: E2600
Selected com port: COM3
Selected speed port: 921600
Attention !!! Use this operation after flashing phone
Search diag port... OK (COM52)
Phone SN: RV1C62VSFC
Deactivate MSL - OK
Calculated code please wait...
Decrypted time: 45 sec
This is zone 0
[PCK]:Enter this without sim #0141*00000000# this is sim lock
[NCK]:Enter this without sim #0111*89460254# this is net lock
[SCK]:Enter this without sim #0121*00000000# this is CP lock
[SPCK]:Enter this without sim #0133*00000000# this is SP lock
[MCK]:Enter this without sim #0199*55972924# this is Master(freeze) code

Read info - ok
Elapsed time: 93 second, sw ver: 3.5.0040
-------------------------------------------------------------------------------

Dwight07 · 12-28-2013, 00:35

Selected model: N7105
Selected port: COM5 Z3X BOX Serial Port
Selected port speed: 115200
Reading phone info...
Build: M9615ACEHWMAZD179590
Reading security... OK
Searching server... OK
NET lock: #7465625*638*40247263#
Sub lock: #7465625*782*00000000#
SP lock: #7465625*77*00000000#
CP lock: #7465625*27*00000000#
For check lock status: *#7465625#
Done with Samsung Tool v.16.5

Done with Samsung Tool v.16.5

yanxs · 12-28-2013, 05:49

Carrier: Rogers Wireless

model: G730A
Selected port: COM27 SAMSUNG Mobile USB Serial Port
Selected port speed: 115200
Searching ADB device...
Please, allow USB debugging on phone... OK
Reading phone info...
Model: SM-G730W8
Android version: 4.2.2
Product code: SM-G730WMBAFMC
Phone version: G730W8VLUAMI2
PDA version: G730W8VLUAMI2
CSC version: G730W8OYAAMI2
IMEI: 357749050368597
Phone S/N: R31D9152XGW
Checking phone at COM27 OK
Backuping NVM... OK
Checking Super user right... true
Backuping MMCBLK... OK
Writing data to phone... OK
Rebooting phone... OK
Checking phone at COM27 OK
Restoring NVM... OK
Reseting... OK
Unlock done
Done with Samsung Tool v.16.7

i clicked yes at the warning that stated that wrong model selected.

AL-NAJAT · 12-28-2013, 21:09

Selected model: I9500
Selected port:
Selected port speed: 115200
Searching ADB device... OK
Reading phone info...
Model: GT-I9500
Android version: 4.3
Product code: Not Active
Phone version: I9500XXUEMJ8
PDA version: I9500XXUEMJ8
CSC version: I9500OJVEMJ8
IMEI: 004999010640000
Phone S/N: RF1D45EJGGR
Checking Super user right... true
Reading nv data... OK
Reading modem... OK
Checking magic... OK
Running zTool, please wait... OK
Detected new type of security
Calculating... OK
Patching modem... OK
Writing data to phone... OK
Rebooting phone... OK
Repair done
Done with Samsung Tool v.16.6

12-25-2013, 16:31	#9887 (permalink)
..::Rizwan::.. No Life Poster Join Date: May 2008 Location: P@Ki$t@n Posts: 3,165 Member: 777415 Status: Offline Sonork: 1589702 Thanks Meter: 1,420	GT-I8910 Unlock Model: GT-I8910 CountryCode: ORA Factory SW: I8910XXIE6 UniqueNumber: 71000000589880 MemoryPhone: MD512256B(I8910)S PDA/CSC version: I8910BVIE2/I8910ORAIE2 Phone version: I8910XXIDD Phone HW: MP 1.000 IMEI: 35874102XXXXXX/1 Phone S/N: R7XS500684 Build: M6290A-KPRBL-2.2.004006T Reading Security... OK Bypass MSL... OK Unlocking ... OK Done with Samsung 3G tool ver 16.7

12-26-2013, 06:44	#9890 (permalink)
Dilip_Nath No Life Poster Join Date: Nov 2006 Location: Bangladesh Posts: 1,377 Member: 387110 Status: Offline Sonork: Not Use Thanks Meter: 630	S5282 pattern lock done

12-26-2013, 10:07	#9891 (permalink)
ak0101 No Life Poster Join Date: May 2005 Location: Tirana Age: 43 Posts: 791 Member: 143851 Status: Offline Thanks Meter: 162	c3520 unlocked Selected model: C3520 Selected com port: COM4 Selected speed port: 921600 Please, connect phone and press power button 3 seconds Phone Detected Use automatic parameters Phone in TAT MODE Phone IMEI: 35526105973455 Phone SW: C3520XXMA3 Phone CSC: C3520OXAMA3 Phone BT ADDR: F05A-09-4C02D8 Phone SN: RV1D33PZEW [FREZEE]:03436870 [NET LOCK]:00000000 [Subset LOCK]:00000000 [SP LOCK]:00000000 [CP LOCK]:00000000 [Sim LOCK]:3605 [Activa LOCK]:00000000 [Phone LOCK]:00000000 Read info - ok Elapsed time: 20 second, sw ver: 3.5.0040

12-27-2013, 09:48	#9894 (permalink)
vicky_tomar No Life Poster Join Date: Mar 2012 Location: INDIA Posts: 897 Member: 1740430 Status: Offline Sonork: 100.1627542 Thanks Meter: 198	samsung e2232 menu problem solve samsung e2232 menu problem solve BR:, VICKY TOMAR

12-28-2013, 00:35	#9898 (permalink)
Dwight07 Freak Poster Join Date: Dec 2007 Posts: 268 Member: 642071 Status: Offline Thanks Meter: 54	Samsung n7105 unlock done Selected model: N7105 Selected port: COM5 Z3X BOX Serial Port Selected port speed: 115200 Reading phone info... Build: M9615ACEHWMAZD179590 Reading security... OK Searching server... OK NET lock: #746562563840247263# Sub lock: #746562578200000000# SP lock: #74656257700000000# CP lock: #74656252700000000# For check lock status: *#7465625# Done with Samsung Tool v.16.5 Done with Samsung Tool v.16.5

12-24-2013, 22:13	#9886 (permalink)
cellcarcol No Life Poster Join Date: Apr 2005 Location: America Posts: 1,821 Member: 138781 Status: Offline Thanks Meter: 850	Selected model: I9500 Selected port: COM100 Z3X BOX Serial Port Selected port speed: 115200 Searching ADB device... OK Reading phone info... Model: GT-I9500 Android version: 4.3 Product code: GT-I9500ZWLTTT Phone version: I9500XXUEMJ8 PDA version: I9500UBUEMK1 CSC version: I9500UUBEMK1 IMEI: 355799051703435 Phone S/N: RV1D44WQ5CP Checking Super user right... true Reading nv data... OK Reading modem... OK Checking magic... OK Running zTool, please wait... OK Detected new type of security Calculating... OK Patching modem... OK Writing data to phone... OK Rebooting phone... OK Repair done Done with Samsung Tool v.16.4

12-25-2013, 19:32	#9888 (permalink)
LouaiSamuel Junior Member Join Date: Dec 2013 Posts: 9 Member: 2090456 Status: Offline Thanks Meter: 1	Selected model: I9305 Selected port: COM13 Qualcomm HS-USB Diagnostics 9004 Selected port speed: 115200 Reading phone info... Build: M9615ACEHWMAZD1795 Reading security... OK Calculating... OK Writing security... OK Reseting... Unlock done Done with Samsung Tool v.16.7 Selected model: I9305 Selected port: COM13 Qualcomm HS-USB Diagnostics 9004 Selected port speed: 115200 Checking phone at COM13 Repairing IMEI... OK Reseting... OK Repair done Done with Samsung Tool v.16.7

12-25-2013, 23:20	#9889 (permalink)
syed 2014 Junior Member Join Date: Nov 2013 Posts: 3 Member: 2073562 Status: Offline Thanks Meter: 0	AFTER FLASHING IMEI HAS BEEN CHANGED TRYING TO REPAIR IMEI BUT STILL SAME LOG: Selected model: I9300 Selected port: COM6 USB Serial Port Selected port speed: 115200 File analysis... OK Total file size: 0x00000000 Searching USB Flash Interface... not found Done with Samsung Tool v.16.6 Selected model: I9300 Selected port: COM6 USB Serial Port Selected port speed: 115200 Searching ADB device... OK Reading phone info... Model: GT-I9300 Android version: 4.0.4 Product code: GT-I9300MBDVD2 Phone version: I9300BULE6 PDA version: I9300BUALE6 CSC version: I9300VFGALE6 IMEI: 004999010640000 Phone S/N: RV1D248K9NF Checking Super user right... false Rooting phone, please wait... OK Checking Super user right... true Reading nv data... OK Reading modem... OK Reading kernel... OK Checking magic... OK Running zTool, please wait... OK Detected new type of security Calculating... OK Patching modem... OK Writing data to phone... OK Rebooting phone... OK Repair done Done with Samsung Tool v.16.6 Selected model: I9300 Selected port: COM6 USB Serial Port Selected port speed: 115200 Searching ADB device... OK Reading phone info... Model: GT-I9300 Android version: 4.0.4 Product code: GT-I9300MBDVD2 Phone version: I9300BULE6 PDA version: I9300BUALE6 CSC version: I9300VFGALE6 IMEI: 004999010640000 Phone S/N: RV1D248K9NF Checking Super user right... true Reading nv data... OK Reading modem... OK Reading kernel... OK Checking magic... OK Running zTool, please wait... OK Detected new type of security Calculating... OK Patching modem... OK Writing data to phone... OK Rebooting phone... OK Repair done Done with Samsung Tool v.16.6

12-26-2013, 19:40	#9892 (permalink)
jboy Freak Poster Join Date: May 2002 Location: B&H, Australia Posts: 243 Member: 11715 Status: Offline Thanks Meter: 5	Selected model: S7580 Selected port: COM3 Z3X BOX Serial Port Selected port speed: 115200 Please, allow USB debugging on phone... Reading phone info... Model: GT-S7580 Android version: 4.2.2 Product code: Unknown Phone version: S7580XXUAMK5 PDA version: S7580XXUAMK6 CSC version: S7580COVAMJ1 IMEI: 359702052690912 Phone S/N: R21DC1KDMWZ Checking Super user right... true Reading data from phone... OK Unlocking... OK Rebooting phone... OK Unlock done Done with Samsung Tool v.16.7 Done with Samsung Tool v.16.7 Manualy rooted with Klingoroot tool from http://www.kingoapp.com/

12-28-2013, 05:49	#9899 (permalink)
yanxs Junior Member Join Date: Apr 2012 Posts: 30 Member: 1751903 Status: Offline Thanks Meter: 2	SM-G730W8 Unlock Successful Carrier: Rogers Wireless model: G730A Selected port: COM27 SAMSUNG Mobile USB Serial Port Selected port speed: 115200 Searching ADB device... Please, allow USB debugging on phone... OK Reading phone info... Model: SM-G730W8 Android version: 4.2.2 Product code: SM-G730WMBAFMC Phone version: G730W8VLUAMI2 PDA version: G730W8VLUAMI2 CSC version: G730W8OYAAMI2 IMEI: 357749050368597 Phone S/N: R31D9152XGW Checking phone at COM27 OK Backuping NVM... OK Checking Super user right... true Backuping MMCBLK... OK Writing data to phone... OK Rebooting phone... OK Checking phone at COM27 OK Restoring NVM... OK Reseting... OK Unlock done Done with Samsung Tool v.16.7 i clicked yes at the warning that stated that wrong model selected.

12-28-2013, 21:09	#9900 (permalink)
AL-NAJAT Freak Poster Join Date: Dec 2007 Location: From Syria In Turkye Posts: 238 Member: 643083 Status: Offline Sonork: 100.1593024 Thanks Meter: 40	Selected model: I9500 Selected port: Selected port speed: 115200 Searching ADB device... OK Reading phone info... Model: GT-I9500 Android version: 4.3 Product code: Not Active Phone version: I9500XXUEMJ8 PDA version: I9500XXUEMJ8 CSC version: I9500OJVEMJ8 IMEI: 004999010640000 Phone S/N: RF1D45EJGGR Checking Super user right... true Reading nv data... OK Reading modem... OK Checking magic... OK Running zTool, please wait... OK Detected new type of security Calculating... OK Patching modem... OK Writing data to phone... OK Rebooting phone... OK Repair done Done with Samsung Tool v.16.6

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Post here successfully unlock or IMEI repair LG	andrew_tm	Z3X-Team Products	1841	07-06-2022 14:14
Post here successfully unlock or IMEI repair Infinity Box	R@ZIB-BD	Infinity-Box	3	07-04-2014 16:37
Post here successfully unlock or IMEI repair LG	R@ZIB-BD	Z3X-Team Products	2	02-01-2011 17:29