Post here successfully job with Z3X-BOX Samsung (2018-2022) - Page 100 - GSM-Forum

technomak · 06-25-2020, 14:02

Flash this Modem : A305FDDS5BTC1
Then repair,

Code:

 
 Operation: Repair
 Selected model: SM-A305F
 Software version: 40.6
 
 Waiting ADB device... OK
 Reading phone info...
 Model: SM-A305F
 Android version: 10
 PDA version: A305FDDS5BTE3
 CSC version: A305FOLE5BTE3
 Phone version: A305FXXS5BTC1
 Product code: SM-A305FZKFXID
 CSC country code: INDONESIA
 CSC sales code: XID
 Phone SN:  
 IMEI:  
 HW version: MP 0.200
 RF cal date: 20190327
 Chip name: EXYNOS7904
 Modem board: SHANNON327
 Security patch: 2020-05-01
 Boot Warranty bit: 1
 SIM State: LOADED,ABSENT
 Initialization zTool... OK
 Running zTool, please wait... OK
 Reading data from phone... OK
 Searching server... OK
 Checking server answer... OK
 Executing... OK
 Reading data from phone... OK
 Calculating... OK
 Searching server... OK
 Waiting for server answer... OK
 Writing security... OK
 Rebooting phone... OK

ellisony · 06-25-2020, 16:50

Hello everyone I have samsung G925F with samsung account
I tried to write combination then remove account but not successfully account stil there, and storage of the phone becomes low.need help

ellisony · 06-25-2020, 16:54

I dnt knw if I post on correct section

Yusuf Lawal · 06-25-2020, 17:27

Quote:

Originally Posted by ellisony

Hello everyone I have samsung G925F with samsung account
I tried to write combination then remove account but not successfully account stil there, and storage of the phone becomes low.need help

Unless you can look for v25.5.

That's the only version that work will that phone...

chipscell25 · 06-25-2020, 18:16

Operation: Unlock
Selected model: SM-J327P
Software version: 40.5

Waiting ADB device... OK
Reading phone info...
Model: SM-J327P
Android version: 6.0.1
PDA version: J327PVPU4ARJ2
CSC version: J327PSPT4ARJ2
Phone version: J327PVPU4ARF2
Product code: Not Active
CSC country code: USA
CSC sales code: BST
Phone SN: 00000000000
IMEI: 3526180xxxxxxxx
HW version: J327P.03
RF cal date: 2017.12.11
Chip name: MSM8937
Modem board: MSM8917
Security patch: 2018-08-01
Boot Warranty bit: 0
SIM State: CARD_IO_ERROR
Searching Samsung diag port... detected COM244
Writing data to phone... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.40.5

chipscell25 · 06-25-2020, 18:16

Operation: Unlock
Selected model: SM-G610M
Software version: 40.6

Waiting ADB device... OK
Reading phone info...
Model: SM-G610M
Android version: 7.0
PDA version: G610MUBU1BQI1
CSC version: G610MUUB1BQI1
Phone version: G610MUBU1BQH5
Product code: SM-G610MWDATPA
CSC country code: PANAMA
CSC sales code: TPA
Phone SN: R28HB0PJ54L
IMEI: 3534630xxxxxxxx
HW version: MP 0.100
RF cal date: 20161107
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2017-08-01
Boot Warranty bit: 1
SIM State: ABSENT
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Reading data... OK
Detecting MODEM... OK
Reading MODEM... OK
Calculating... OK
Initialization data... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Writing zTool... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data... OK
HWID: A6 03 00 00 00 00 00 00 00 00 00 00 A1 83 75 F1
Calculating... OK
Unlocking... OK
Writing NV data... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.40.6

ellisony · 06-26-2020, 06:18

Quote:

Originally Posted by Yusuf Lawal

Unless you can look for v25.5.

That's the only version that work will that phone...

Ok thanks I will try again tomorrow today

ellisony · 06-26-2020, 06:22

Quote:

Originally Posted by Yusuf Lawal

Unless you can look for v25.5.

That's the only version that work will that phone...

Thanks I will try again today

ellisony · 06-26-2020, 08:01

Searching Samsung USB Flash Interface... detected COM10
Setup connection... OK
Reading PIT from phone... OK
Searching FRP lock... OK
Erasing FRP... OK
Searching Reactivation lock... OK
Erasing Reactivation lock... OK
Searching EE lock... OK
Erasing EE lock... OK
Reset done
Done with Samsung Tool PRO v.25.5

thanks alot its done

chipscell25 · 06-27-2020, 23:05

Operation: Unlock
Selected model: SM-J327P
Software version: 40.6

Waiting ADB device... OK
Reading phone info...
Model: SM-J327P
Android version: 6.0.1
PDA version: J327PVPU4ARJ2
CSC version: J327PSPT4ARJ2
Phone version: J327PVPU4ARF2
Product code: Not Active
CSC country code: USA
CSC sales code: BST
Phone SN: 00000000000
IMEI: 3526180xxxxxxxx
HW version: J327P.03
RF cal date: 2017.10.09
Chip name: MSM8937
Modem board: MSM8917
Security patch: 2018-08-01
Boot Warranty bit: 0
SIM State: ABSENT
Searching Samsung diag port... detected COM185
Writing data to phone... OK
Rebooting phone... OK
Unlock done
Done with Samsung Tool PRO v.40.6

chipscell25 · 06-29-2020, 22:15

Operation: Read Codes via Server
Selected model: SM-J250M
Selected port: COM277 SAMSUNG Mobile USB Serial Port
Software version: 40.6

Checking Login and Password... OK
Ballance: 7 crd.
You have 7 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-J250M
Android version: 7.1.1
PDA version: J250MUBS5ASE3
CSC version: J250MUWE5ASE1
Phone version: J250MUBS5ASE2
Product code: SM-J250MZKADOR
CSC country code: DOMINICAN REPUBLIC
CSC sales code: DOR
Phone SN: RV8K906Z49E
IMEI: 3533240xxxxxxxx
HW version: MP0.900
RF cal date: 2018.09.12
Chip name: MSM8937
Modem board: MSM8917
Security patch: 2019-05-01
Boot Warranty bit: 0
SIM State: NETWORK_LOCKED
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching Samsung diag port... detected COM277
Reading phone info... OK
Reading data from phone... OK
Searching Ramdump interface... COM34 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 52506863
NET lock: 26804826
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.40.6

chipscell25 · 07-01-2020, 15:48

Operation: Read Codes via Server
Selected model: SM-A705FN
Software version: 40.7

Checking Login and Password... OK
Ballance: 52 crd.
You have 52 credit(s) left. This operation takes 10 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-A705FN
Android version: 9
PDA version: A705FNXXU5ASL4
CSC version: A705FNOXM5ATA1
Phone version: A705FNXXU5ASL4
Product code: SM-A705FZBUPHE
CSC country code: SPAIN
CSC sales code: PHE
Phone SN: R58MA1SMJJF
IMEI: 3520291XXXXXXXX
HW version: MP 0.4A0
RF cal date: 2019.10.08
Chip name: SM6150
Modem board: SM6150
Security patch: 2020-01-01
Boot Warranty bit: 0
SIM State: ABSENT,ABSENT
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching Samsung diag port... detected COM260
Reading phone info... OK
Reading data from phone... OK
Searching Ramdump interface... COM34 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 84841494
NET lock: 86425091
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.40.7

djj007 · 07-01-2020, 16:46

chipscell25 · 07-06-2020, 19:15

Operation: Read Codes
Selected model: SM-J321AZ
Software version: 40.7

Please wait, generating hash codes file, this can take few minutes... OK
Searching Samsung modem... detected COM304
Reading phone info...
Model: SM-J321AZ
AP version: J321AZTUS3AQG1
CSC version: J321AZAIZ3AQG1
CP version: J321AZTUS3AQG1
Product code: SM-J321AZDZAIO
Phone SN: R28H718897H
IMEI: 3565180xxxxxxxx
Unique number: CQN00C7C7900453
Searching Samsung diag port... detected COM303
Reading phone info... OK
CP version: J320AZTUS3AQG1
CP build: Jul 11 2017 17:12:08
Reading data from phone... OK
Reading NV data... OK
Modem board: SHANNON308
Checking NV data... OK
Calculating... OK
Please wait, calculating codes... OK (time - 00:00:09)
Freeze code: 15253964
NET lock: 24029746
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#
Done with Samsung Tool PRO v.40.7

Yusuf Lawal · 07-07-2020, 15:27

Operation: Read Codes
Selected model: SM-J120A
Software version: 40.4

Please wait, generating hash codes file, this can take few minutes... OK
Searching Samsung modem... detected COM237
Reading phone info...
Model: SM-J120A
AP version: J120AUCS3AQE1
CSC version: J120AATT3AQE1
CP version: J120AUCU3AQE1
Product code: SM2J120AZWBATT
Phone SN: XXXXXXXXXX
IMEI: XXXXXXXXXXXXXXX
Unique number: XXXXXXXXXXXXXXX
Searching Samsung diag port... detected COM236
Reading phone info... OK
CP version: J120AUCU3AQE1
CP build: May 2 2017 10:44:23
Reading data from phone... OK
Reading NV data... OK
Modem board: SHANNON308
Checking NV data... OK
Calculating... OK
Please wait, calculating codes... OK (time - 00:00:00)
Freeze code: 49479352
NET lock: 15080406
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.40.4

06-25-2020, 16:50	#1487 (permalink)
ellisony Freak Poster Join Date: Dec 2018 Location: Harare Zimbabwe Age: 33 Posts: 320 Member: 2883035 Status: Offline Thanks Meter: 84	Samsung G925F U6 Hello everyone I have samsung G925F with samsung account I tried to write combination then remove account but not successfully account stil there, and storage of the phone becomes low.need help

07-01-2020, 16:46	#1498 (permalink)
djj007 No Life Poster Join Date: Nov 2016 Location: GUJARAT Posts: 1,439 Member: 2643730 Status: Offline Thanks Meter: 1,115	G600fy hang on logo done by z3x box

07-07-2020, 15:27	#1500 (permalink)
Yusuf Lawal No Life Poster Join Date: Oct 2011 Location: Nigeria Posts: 6,593 Member: 1677653 Status: Offline Thanks Meter: 2,769	Samsung j120a read code via diag mode done Operation: Read Codes Selected model: SM-J120A Software version: 40.4 Please wait, generating hash codes file, this can take few minutes... OK Searching Samsung modem... detected COM237 Reading phone info... Model: SM-J120A AP version: J120AUCS3AQE1 CSC version: J120AATT3AQE1 CP version: J120AUCU3AQE1 Product code: SM2J120AZWBATT Phone SN: XXXXXXXXXX IMEI: XXXXXXXXXXXXXXX Unique number: XXXXXXXXXXXXXXX Searching Samsung diag port... detected COM236 Reading phone info... OK CP version: J120AUCU3AQE1 CP build: May 2 2017 10:44:23 Reading data from phone... OK Reading NV data... OK Modem board: SHANNON308 Checking NV data... OK Calculating... OK Please wait, calculating codes... OK (time - 00:00:00) Freeze code: 49479352 NET lock: 15080406 SUB lock: 00000000 SP lock: 00000000 CP lock: 00000000 SIM lock: 00000000 For check lock status: *#7465625# Done with Samsung Tool PRO v.40.4

06-25-2020, 16:54	#1488 (permalink)
ellisony Freak Poster Join Date: Dec 2018 Location: Harare Zimbabwe Age: 33 Posts: 320 Member: 2883035 Status: Offline Thanks Meter: 84	I dnt knw if I post on correct section

06-25-2020, 18:16	#1490 (permalink)
chipscell25 No Life Poster Join Date: Mar 2011 Location: dominican republic Age: 45 Posts: 2,101 Member: 1537078 Status: Offline Sonork: celular center Thanks Meter: 573	Operation: Unlock Selected model: SM-J327P Software version: 40.5 Waiting ADB device... OK Reading phone info... Model: SM-J327P Android version: 6.0.1 PDA version: J327PVPU4ARJ2 CSC version: J327PSPT4ARJ2 Phone version: J327PVPU4ARF2 Product code: Not Active CSC country code: USA CSC sales code: BST Phone SN: 00000000000 IMEI: 3526180xxxxxxxx HW version: J327P.03 RF cal date: 2017.12.11 Chip name: MSM8937 Modem board: MSM8917 Security patch: 2018-08-01 Boot Warranty bit: 0 SIM State: CARD_IO_ERROR Searching Samsung diag port... detected COM244 Writing data to phone... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.40.5

06-25-2020, 18:16	#1491 (permalink)
chipscell25 No Life Poster Join Date: Mar 2011 Location: dominican republic Age: 45 Posts: 2,101 Member: 1537078 Status: Offline Sonork: celular center Thanks Meter: 573	Operation: Unlock Selected model: SM-G610M Software version: 40.6 Waiting ADB device... OK Reading phone info... Model: SM-G610M Android version: 7.0 PDA version: G610MUBU1BQI1 CSC version: G610MUUB1BQI1 Phone version: G610MUBU1BQH5 Product code: SM-G610MWDATPA CSC country code: PANAMA CSC sales code: TPA Phone SN: R28HB0PJ54L IMEI: 3534630xxxxxxxx HW version: MP 0.100 RF cal date: 20161107 Chip name: EXYNOS7870 Modem board: SHANNON315 Security patch: 2017-08-01 Boot Warranty bit: 1 SIM State: ABSENT Checking Super user right... true Reading NV data... OK Checking NV data... OK Reading data... OK Detecting MODEM... OK Reading MODEM... OK Calculating... OK Initialization data... OK Rebooting phone... OK Waiting ADB device... OK Waiting for device to become ready... OK Writing zTool... OK Initialization zTool... OK Running zTool, please wait... OK Reading data... OK HWID: A6 03 00 00 00 00 00 00 00 00 00 00 A1 83 75 F1 Calculating... OK Unlocking... OK Writing NV data... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.40.6

06-26-2020, 08:01	#1494 (permalink)
ellisony Freak Poster Join Date: Dec 2018 Location: Harare Zimbabwe Age: 33 Posts: 320 Member: 2883035 Status: Offline Thanks Meter: 84	Searching Samsung USB Flash Interface... detected COM10 Setup connection... OK Reading PIT from phone... OK Searching FRP lock... OK Erasing FRP... OK Searching Reactivation lock... OK Erasing Reactivation lock... OK Searching EE lock... OK Erasing EE lock... OK Reset done Done with Samsung Tool PRO v.25.5 thanks alot its done

06-27-2020, 23:05	#1495 (permalink)
chipscell25 No Life Poster Join Date: Mar 2011 Location: dominican republic Age: 45 Posts: 2,101 Member: 1537078 Status: Offline Sonork: celular center Thanks Meter: 573	Operation: Unlock Selected model: SM-J327P Software version: 40.6 Waiting ADB device... OK Reading phone info... Model: SM-J327P Android version: 6.0.1 PDA version: J327PVPU4ARJ2 CSC version: J327PSPT4ARJ2 Phone version: J327PVPU4ARF2 Product code: Not Active CSC country code: USA CSC sales code: BST Phone SN: 00000000000 IMEI: 3526180xxxxxxxx HW version: J327P.03 RF cal date: 2017.10.09 Chip name: MSM8937 Modem board: MSM8917 Security patch: 2018-08-01 Boot Warranty bit: 0 SIM State: ABSENT Searching Samsung diag port... detected COM185 Writing data to phone... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.40.6

06-29-2020, 22:15	#1496 (permalink)
chipscell25 No Life Poster Join Date: Mar 2011 Location: dominican republic Age: 45 Posts: 2,101 Member: 1537078 Status: Offline Sonork: celular center Thanks Meter: 573	Operation: Read Codes via Server Selected model: SM-J250M Selected port: COM277 SAMSUNG Mobile USB Serial Port Software version: 40.6 Checking Login and Password... OK Ballance: 7 crd. You have 7 credit(s) left. This operation takes 5 credits.Continue? Yes Waiting ADB device... OK Reading phone info... Model: SM-J250M Android version: 7.1.1 PDA version: J250MUBS5ASE3 CSC version: J250MUWE5ASE1 Phone version: J250MUBS5ASE2 Product code: SM-J250MZKADOR CSC country code: DOMINICAN REPUBLIC CSC sales code: DOR Phone SN: RV8K906Z49E IMEI: 3533240xxxxxxxx HW version: MP0.900 RF cal date: 2018.09.12 Chip name: MSM8937 Modem board: MSM8917 Security patch: 2019-05-01 Boot Warranty bit: 0 SIM State: NETWORK_LOCKED Rebooting phone... OK Waiting ADB device... OK Rebooting phone... OK Waiting ADB device... OK Waiting for device to become ready... OK Initialization zTool... OK Running zTool, please wait... OK Reading data from phone... OK Searching Samsung diag port... detected COM277 Reading phone info... OK Reading data from phone... OK Searching Ramdump interface... COM34 detected Reading data from phone... OK Calculating... OK Searching server... OK Waiting for server answer... OK Freeze code: 52506863 NET lock: 26804826 SUB lock: 00000000 SP lock: 00000000 CP lock: 00000000 For check lock status: *#7465625# Done with Samsung Tool PRO v.40.6

07-01-2020, 15:48	#1497 (permalink)
chipscell25 No Life Poster Join Date: Mar 2011 Location: dominican republic Age: 45 Posts: 2,101 Member: 1537078 Status: Offline Sonork: celular center Thanks Meter: 573	Operation: Read Codes via Server Selected model: SM-A705FN Software version: 40.7 Checking Login and Password... OK Ballance: 52 crd. You have 52 credit(s) left. This operation takes 10 credits.Continue? Yes Waiting ADB device... OK Reading phone info... Model: SM-A705FN Android version: 9 PDA version: A705FNXXU5ASL4 CSC version: A705FNOXM5ATA1 Phone version: A705FNXXU5ASL4 Product code: SM-A705FZBUPHE CSC country code: SPAIN CSC sales code: PHE Phone SN: R58MA1SMJJF IMEI: 3520291XXXXXXXX HW version: MP 0.4A0 RF cal date: 2019.10.08 Chip name: SM6150 Modem board: SM6150 Security patch: 2020-01-01 Boot Warranty bit: 0 SIM State: ABSENT,ABSENT Rebooting phone... OK Waiting ADB device... OK Rebooting phone... OK Waiting ADB device... OK Waiting for device to become ready... OK Initialization zTool... OK Running zTool, please wait... OK Reading data from phone... OK Searching Samsung diag port... detected COM260 Reading phone info... OK Reading data from phone... OK Searching Ramdump interface... COM34 detected Reading data from phone... OK Calculating... OK Searching server... OK Waiting for server answer... OK Freeze code: 84841494 NET lock: 86425091 SUB lock: 00000000 SP lock: 00000000 CP lock: 00000000 For check lock status: *#7465625# Done with Samsung Tool PRO v.40.7

07-06-2020, 19:15	#1499 (permalink)
chipscell25 No Life Poster Join Date: Mar 2011 Location: dominican republic Age: 45 Posts: 2,101 Member: 1537078 Status: Offline Sonork: celular center Thanks Meter: 573	Operation: Read Codes Selected model: SM-J321AZ Software version: 40.7 Please wait, generating hash codes file, this can take few minutes... OK Searching Samsung modem... detected COM304 Reading phone info... Model: SM-J321AZ AP version: J321AZTUS3AQG1 CSC version: J321AZAIZ3AQG1 CP version: J321AZTUS3AQG1 Product code: SM-J321AZDZAIO Phone SN: R28H718897H IMEI: 3565180xxxxxxxx Unique number: CQN00C7C7900453 Searching Samsung diag port... detected COM303 Reading phone info... OK CP version: J320AZTUS3AQG1 CP build: Jul 11 2017 17:12:08 Reading data from phone... OK Reading NV data... OK Modem board: SHANNON308 Checking NV data... OK Calculating... OK Please wait, calculating codes... OK (time - 00:00:09) Freeze code: 15253964 NET lock: 24029746 SUB lock: 00000000 SP lock: 00000000 CP lock: 00000000 SIM lock: 00000000 For check lock status: *#7465625# Done with Samsung Tool PRO v.40.7